Anja Ludaš Dujmić

Dr. Anja Ludaš Dujmić

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2024 in Polymers
Verified
Journal Article
Open access
PDF file
ADAnja Ludaš Dujmić
Anja Ludaš Dujmić
RRRafaela Radičić
Rafaela Radičić
Sanja Ercegović RažićSanja Ercegović Ražić
Sanja Ercegović Ražić
ICIvan Karlo Cingesar
Ivan Karlo Cingesar
Martina GlogarMartina Glogar
Martina Glogar
Nikša KrstulovićNikša Krstulović
Nikša Krstulović
With recent technological advances and the growing interest in environmentally friendly fiber production processes, the textile industry is increasingly turning to the spinning of filaments from recycled raw materials in the melt spinning process as the simplest method of chemical spinning of fibers. Such processes are more efficient because the desired active particles are melt-spun together with the polymer. The study investigates the melt spinning of recycled polyamide 6 (PA 6) fibers modified with zinc oxide nanoparticles (ZnO NPs) in concentrations ranging from 0.1 to 2.0 wt% of the polymer. The extrusion process was optimized under laboratory conditions. An analysis of the effectiveness of the nanoparticle distribution and chemical composition was performed using scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR). The results of the thermal analysis show an increase in the glass transition temperature of the extruded material from 50.97 °C (raw polymer) to 51.40 °C to 57.98 °C (polymer modified with ZnO NPs) and an increase in the crystallization point from 148.19 °C to a temperature between 175.61 °C and 178.16 °C, while the molar enthalpy (ΔHm) shows a decreasing trend from 65.66 Jg−1 (raw polymer) to 48.23 Jg−1 (PA 6 2.0% ZnO). The FTIR spectra indicate PA 6 polymer, with a characteristic peak at the wavelength 1466 cm−1, but pure ZnO and PA 6 blended with ZnO show a characteristic peak at 2322 cm−1. The distribution of nanoparticles on the fiber surface is more or less randomly distributed and the different size of NPs is visible. These results are confirmed by the EDS results, which show that different concentrations of Zn are present. The mechanical stability of the extruded polymer modified with NPs is not affected by the addition of ZnO NPs, although the overall results of strength (2.56–3.22 cN/tex) and modulus of elasticity of the polymer (28.83–49.90 cN/tex) are lower as there is no drawing process at this stage of the experiment, which certainly helps to increase the final strength of the fibers. The results indicate the potential of modification with ZnO NPs for further advances in sustainable fiber production.

21 March 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
MFMartina Fileš
Martina Fileš
ADAnja Ludaš Dujmić
Anja Ludaš Dujmić
Sanja Ercegović RažićSanja Ercegović Ražić
Sanja Ercegović Ražić
Sandra HudinaSandra Hudina
Sandra Hudina
Biodegradable polymer-based bags were developed as an alternative to plastic. However, their degradation in environmental conditions has not been fully investigated and is often incomplete. Here, the decomposition of three types of biodegradable bags and one type of plastic bag in different types of environments was analyzed. Polymer bags were exposed for six weeks in water, soil, air and compost, while the control groups were stored in room conditions. All types of polymer bags were sampled twice (after 3 and 6 weeks), and different parameters of changes in physical–mechanical properties were measured. The research established significant differences in changes in mechanical properties between different types of biodegradable polymer bags, with ‘white’ and ‘brown’ bags showing the best decomposition potential. As expected, the largest change in the structure and physical–mechanical properties of all types of polymer bags was recorded in compost, and the smallest in air and water.