Sanja Ercegović Ražić

Prof. Dr. Sanja Ercegović Ražić

University of Zagreb Faculty of Textile Technology, Prilaz baruna Filipovića 28a, 10000 Zagreb, Croatia
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 March 2022 in Molecules
Verified
Journal Article
Open access
PDF file
TITomislav Ivankovic
Tomislav Ivankovic
ARAntonija Rajic
Antonija Rajic
Sanja Ercegović RažićSanja Ercegović Ražić
Sanja Ercegović Ražić
SRSabine Rolland Olland Du Roscoat
Sabine Rolland Olland Du Roscoat
ZSZenun Skenderi
Zenun Skenderi
Wool is considered to possibly exhibit antibacterial properties due to the ability of wool clothing to reduce the build-up of odor, which arises from the microbial activity of skin microbiota. Indeed, when tested with a widely used agar diffusion plate test method, even wool or other textiles not treated with any antimicrobial agent can be interpreted to show certain antibacterial effects due to the lack of growth under the specimen, as instructed in ISO 20645:2004 standard. Therefore, we analyzed in detail what happens to bacterial cells in contact with untreated wool and cotton fabric placed on inoculated agar plates by counting viable cells attached to the specimens after 1 and 24 h of contact. All wool and several cotton samples showed no growth under the specimen. Nevertheless, it was shown without a doubt that neither textile material kills bacteria or inhibits cell multiplication. A reasonable explanation is that bacterial cells firmly attach to wool fibers forming a biofilm during multiplication. When the specimen was lifted off the nutrient agar surface, the cells in the form of biofilm remained attached to the wool fibers, removing the biomass and resulting in a clear, no growth zone underneath it. By imaging the textile specimens with X-ray microtomography, we concluded that the degree of attachment could be dependent on surface topography. The results indicate that certain textiles, in this case, wool, could exhibit antibacterial properties by removing excess bacteria that grow on the textile/skin interface when taken off the body.

1 July 2024 in Polymers
Verified
Journal Article
Open access
PDF file
ADAnja Ludaš Dujmić
Anja Ludaš Dujmić
RRRafaela Radičić
Rafaela Radičić
Sanja Ercegović RažićSanja Ercegović Ražić
Sanja Ercegović Ražić
ICIvan Karlo Cingesar
Ivan Karlo Cingesar
Martina GlogarMartina Glogar
Martina Glogar
Nikša KrstulovićNikša Krstulović
Nikša Krstulović
With recent technological advances and the growing interest in environmentally friendly fiber production processes, the textile industry is increasingly turning to the spinning of filaments from recycled raw materials in the melt spinning process as the simplest method of chemical spinning of fibers. Such processes are more efficient because the desired active particles are melt-spun together with the polymer. The study investigates the melt spinning of recycled polyamide 6 (PA 6) fibers modified with zinc oxide nanoparticles (ZnO NPs) in concentrations ranging from 0.1 to 2.0 wt% of the polymer. The extrusion process was optimized under laboratory conditions. An analysis of the effectiveness of the nanoparticle distribution and chemical composition was performed using scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR). The results of the thermal analysis show an increase in the glass transition temperature of the extruded material from 50.97 °C (raw polymer) to 51.40 °C to 57.98 °C (polymer modified with ZnO NPs) and an increase in the crystallization point from 148.19 °C to a temperature between 175.61 °C and 178.16 °C, while the molar enthalpy (ΔHm) shows a decreasing trend from 65.66 Jg−1 (raw polymer) to 48.23 Jg−1 (PA 6 2.0% ZnO). The FTIR spectra indicate PA 6 polymer, with a characteristic peak at the wavelength 1466 cm−1, but pure ZnO and PA 6 blended with ZnO show a characteristic peak at 2322 cm−1. The distribution of nanoparticles on the fiber surface is more or less randomly distributed and the different size of NPs is visible. These results are confirmed by the EDS results, which show that different concentrations of Zn are present. The mechanical stability of the extruded polymer modified with NPs is not affected by the addition of ZnO NPs, although the overall results of strength (2.56–3.22 cN/tex) and modulus of elasticity of the polymer (28.83–49.90 cN/tex) are lower as there is no drawing process at this stage of the experiment, which certainly helps to increase the final strength of the fibers. The results indicate the potential of modification with ZnO NPs for further advances in sustainable fiber production.

2 November 2021 in Molecules
Verified
Journal Article
Open access
PDF file
SKSuzana Kutnjak-Mravlinčić
Suzana Kutnjak-Mravlinčić
Ana SutlovicAna Sutlovic
Ana Sutlovic
Martina GlogarMartina Glogar
Martina Glogar
Sanja Ercegović RažićSanja Ercegović Ražić
Sanja Ercegović Ražić
DGDamir Godec
Damir Godec
According to the great impact of additive technology on the development of modern industry, a lot of research is being done to obtain 3D printed parts with better properties. This research is extremely important because there are no scientific papers in the field of post dyeing of acrylonitrile/butadiene/styrene (ABS) 3D printed parts. The experiment was carried out using disperse dyes on ABS specimens. The obtained coloration of the specimens was in the primary colors (yellow, red, and blue) in the specified dyestuff concentration range and was evaluated using an objective CIELab system. Based on the obtained color parameters, remission values and Kubelka-Munk coefficient, dye mixtures and an ombre effect were performed to obtain patterns in the desired hues. Abrasion resistance of disperse dyed specimens was tested using different abrasive materials over a wide range of fineness to simulate different indoor and outdoor soils and was compared to abrasion resistance of specimens produced from the industrially dyed wire with the master batch. The results show that 3D printed ABS products can be produced in one or more desired shades with satisfactory abrasion resistance. This undoubtedly represents the added value of 3D printed ABS parts and extends their application to the field of creative industries and design, specifically footwear design.

9 July 2024 in International Journal of Clothing Science and Technology
Verified
Journal Article
Open access
PDF file
Martina GlogarMartina Glogar
Martina Glogar
Sanja Ercegović RažićSanja Ercegović Ražić
Sanja Ercegović Ražić
Purpose: In the field of research on the application of digital printing to textile materials, there are still many research issues that arise from the very demanding interaction of digital printing technology and the complex, heterogeneous surface system of textile materials. This is precisely why the area of pre-treatment of textile materials is in need of research, and the purpose of this research was to establish the level of influence of physical and chemical activation of the textile surface with plasma and the possibility of improving the quality of the print and colour reproduction.Design/methodology/approach: The paper deals with the possibility of applying argon and oxygen cold low-pressure plasma in the processing of cellulose knitted fabrics, with the aim of improving the quality of the print and colour reproduction in digital pigment inkjet printing. The selected raw material samples were 100% raw cotton and lyocell. After plasma treatment, the samples were printed by digital ink jet printing with water-based pigment printing ink. An analysis of the micromorphological structure of untreated and plasma-treated samples before and after printing was carried out, and a comparative analysis of the colour of the printed elements was carried out depending on the pre-treatment.Findings: The conducted research showed a positive influence of plasma pre-treatment on the coverage of the fibre surface with pigments, the uniformity of pigment distribution along the fibre surface and the uniformity of the distribution of the polymeric binder layer. This has a positive effect on colour reproduction. Also, certain improvements in colourfastness to washing were obtained.Research limitations/implications: Considering the complexity of the topic, although exhaustive, this research is not sufficient in itself, but opens up new questions and gives ideas for further research that must be carried out in this area.Practical implications: Also, this kind of research contributes to the possibility of adopting the idea of industrial plasma transformation, as an ecologically sustainable functionalisation of textiles, which has not yet been established.Originality/value: This research is certainly a contribution to the establishment of acceptable textile pre-treatment methods in the field of digital printing, as one of the key quality factors in digital textile printing (DTP). Considering the still large number of obstacles and unanswered questions encountered in the field of digital printing on textiles, this kind of research is a strong contribution to the understanding of the fundamental mechanisms of the complex interaction between printing ink and textile.

1 January 2023 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
Sanja Ercegović RažićSanja Ercegović Ražić
Sanja Ercegović Ražić
ALAnja Ludaš
Anja Ludaš
TKTea Kaurin
Tea Kaurin
TZTin Zonjić
Tin Zonjić
In the paper, different types of polymers (rPLA, PETG, TPU) printed with a 3D printer are tested on textile material used for car interiors. The primary goal is to examine the possibility of 3D printing on textiles for the automotive industry, its adhesive and other mechanical properties. A further goal is to explore possibilities for new ways of designing and aesthetic efficiency of materials used in vehicles as well as potential ergonomically positive effects. The adhesion properties of the polymer-textile material, the strength printed on the surface using the tape method, the wear resistance of the polymer printed on the textile and the ageing of the polymer under simulated conditions are tested. The results are used to select a suitable polymer for the 3D printer and print it on the selected textile material for automotive industry.

18 October 2022 in Molecules
Verified
Journal Article
Open access
PDF file
Sanja Ercegović RažićSanja Ercegović Ražić
Sanja Ercegović Ražić
NKNevenka Kopjar
Nevenka Kopjar
VKVilena Kašuba
Vilena Kašuba
ZSZenun Skenderi
Zenun Skenderi
JAJadranka Akalović
Jadranka Akalović
JHJasna Hrenović
Jasna Hrenović
For a long time, the production and processing of cowhide was based on the use of chrome tanning. However, the growing problem with chromium waste and its negative impact on human health and the environment prompted the search for more environmentally friendly processes such as vegetable tanning or aldehyde tanning. In the present study, we investigated the DNA-damaging effects induced in HepG2 cells after 24 h exposure to leather samples (cut into 1 × 1 cm2 rectangles) processed with different tanning agents. Our main objective was to determine which tanning procedure resulted in the highest DNA instability. The extent of treatment-induced DNA damage was determined using the alkaline comet assay. All tanning processes used in leather processing caused primary DNA damage in HepG2 cells compared to untreated cells. The effects measured in the exposed cells indicate that the leaching of potentially genotoxic chemicals from the same surface is variable and was highest after vegetable tanning, followed by synthetic tanning and chrome tanning. These results could be due to the complex composition of the vegetable and synthetic tanning agents. Despite all limitations, these preliminary results could be useful to gain a general insight into the genotoxic potential of the processes used in the processing of natural leather and to plan future experiments with more specific cell or tissue models.