The use of plant protection products (PPPs) has become fundamental to guarantee excellent field productivity. Nevertheless, their usage presents critical issues, such as the quantity of substances used, the relative toxicity, and the contamination of nearby fields caused by atmospheric drift. This study focuses on the characterization of aerosol droplets of PPPs produced by spraying a chemical marker, fluorescein, with an orchard airblast sprayer equipped with conventional hollow cone (HC) and anti-drift air inclusion (AI) nozzles, using a wind tunnel as a controlled environment. A particle/droplet image analysis was employed to study the droplet production of the nozzles, while a liquid chromatography tandem mass spectrometry (HPLC-MS/MS) analysis allowed us to evaluate samples collected using a cascade impactor located at 5 m, 10 m, and 20 m from the emission point. Overall, HC nozzles are very accurate at producing specific drop size distributions (DSDs), while AI nozzles produce a much wider DSD, concentrating the largest part of the distributed volume into droplets of a larger size. The marker concentration was much lower for the AI nozzles compared to the HC nozzles; moreover, the two nozzles show a similar trend in the coarse droplet range, while significantly differing in the fine droplet spectrum.
Plant protection products are necessary to guarantee food security, but their drift into the environment, usually in the form of aerosol, poses a threat to the health of bystanders and surrounding ecosystems. Appropriate testing of plant protection equipment and of its possible configurations is key to reducing drift while guaranteeing treatment efficacy. A key role in drift generation and treatment quality is played by the drop size distribution (DSD) of the employed spray nozzles. The DSD of nozzles can and should be tested before being employed by various methods. This paper recounts the recent experience in testing the DSD generated by two types of agricultural nozzles by an Oxford Lasers N60V Particle/Droplet Image Analysis (PDIA) system. The analyses put in place aimed at identifying the optimal instrument settings and adapting the methodology to the relevant ISO 25358:2018 standard. The cumulated DSD of the two nozzle types have then been fitted with a logistic function, with the aim to obtain nozzle performance models. The fitting has proven highly reliable, with correlation coefficients . These models are a satisfactory starting point to compare the performance of different PPEs. In perspective, the fitted nozzle models can help bridge the mathematical gap with other aspects of PPE performance, such as aerosol generation and downwind transport.