The growing concern about climate change and the contemporary increase in mobility requirements call for faster, cheaper, safer, and cleaner means of transportation. The retrofitting of fossil-fueled piston engine ultralight aerial vehicles to hydrogen power systems is an option recently proposed in this direction. The goal of this investigation is a comparative analysis of the environmental impact of conventional and hydrogen-based propulsive systems. As a case study, a hybrid electric configuration consisting of a fuel cell with a nominal power of about 30 kW, a 6 kWh LFP battery, and a pressurized hydrogen vessel is proposed to replace a piston prop configuration for an ultralight aerial vehicle. Both power systems are modeled with a backward approach that allows the efficiency of the main components to be evaluated based on the load and altitude at every moment of the flight with a time step of 1 s. A typical 90 min flight mission is considered for the comparative analysis, which is performed in terms of direct and indirect emissions of carbon dioxide, water, and pollutant substances. For the hydrogen-based configuration, two possible strategies are adopted for the use of the battery: charge sustaining and charge depleting. Moreover, the effect of the altitude on the parasitic power of the fuel cell compressor and, consequently, on the net efficiency of the fuel cell system is taken into account. The results showed that even if the use of hydrogen confines the direct environmental impact to the emission of water (in a similar quantity to the fossil fuel case), the indirect emissions associated with the production, transportation, and delivery of hydrogen and electricity compromise the desired achievement of pollutant-free propulsion in terms of equivalent emissions of CO2 and VOCs if hydrogen is obtained from natural gas reforming. However, in the case of green hydrogen from electrolysis with wind energy, the total (direct and indirect) emissions of CO2 can be reduced up to 1/5 of the fossil fuel case. The proposed configuration has the additional advantage of eliminating the problem of lead, which is used as an additive in the AVGAS 100LL.
The adoption of proton exchange membrane fuel cells (PEMFCs) in unmanned aerial vehicles (UAVs) offers a sustainable pathway to zero-emission propulsion, supporting aviation decarbonization by replacing battery or fossil fuel systems with efficient hydrogen technology. This work presents the development, validation, and application of a comprehensive dynamic model of a 1 kW open-cathode PEMFC system, including complete balance of plant (BOP) and control logic for four cooling fans, a purge valve, and a short-circuit unit (SCU). The model was validated through extensive experiments with step, triangular, and real-world UAV current profiles. Under steady-state conditions, it reproduces stack voltage with a <1 V average error and a temperature of 2.5 °C. Dynamic modeling accurately predicts fan behavior, purge/SCU events, and transient voltage drops. Applied to a 25 min UAV flight, the model quantifies reactant-management impacts: purge events increase H2 usage by 4.8%, with SCU raising total to 5.6% above stoichiometric consumption. Altitude analysis shows ambient temperature reduction dominates the oxygen partial pressure effects, yielding net cell voltage increase under current-based fan control. These insights underscore explicit BOP and ambient modeling for accurate UAV endurance estimation and strategy optimization, providing a basis for future altitude-chamber validation. By enabling precise BOP dynamics simulation and H2 optimization, this model advances the achievement of affordable clean energy, facilitating an extended endurance with minimal environmental impact.
Open-cathode Proton Exchange Membrane Fuel Cells (PEMFCs) are a promising technology for increasing the endurance of small Unmanned Aerial Vehicles (UAVs), ground robots, e-bikes, and light electric vehicles. However, their performance under realistic operating conditions is strongly influenced by rapid variations in load, temperature, and ambient pressure, which are often neglected in design-oriented or quasi-steady-state analyses. This study experimentally investigates a 1 kW open-cathode PEMFC system, including its balance of plant and a passive supercapacitor buffer, under a representative UAV flight power profile. Steady-state and dynamic tests were conducted to assess polarization characteristics, thermal behavior, parasitic power consumption, and hydrogen utilization. Results revealed significant thermal inertia and hysteresis effects during load transients, causing voltage deviations from steady-state performance and stabilization times exceeding 90 s. The supercapacitor effectively reduced stack current ramp rates, although some high-frequency oscillations remained. Under flight-representative conditions, the system achieved stable operation with average voltaic efficiency ranging from 55.3% to 60.7% and net efficiency ranging from 50.2% to 54.2%. Auxiliary components had a measurable impact on overall performance: cooling fans accounted for 2–6% of stack power during steady operation and approximately 2.5% of total mission energy, while hydrogen purge losses can significantly reduce vehicle endurance. The findings demonstrate the importance of energy-based performance assessment, including auxiliary loads and purge losses, to obtain realistic estimates of efficiency and endurance in dynamic PEMFC-powered applications.