Widespread adoption of indoor positioning systems based on WiFi fingerprinting is at present hindered by the large efforts required for measurements collection during the offline phase. Two approaches were recently proposed to address such issue: crowdsourcing and RSS radiomap prediction, based on either interpolation or propagation channel model fitting from a small set of measurements. RSS prediction promises better positioning accuracy when compared to crowdsourcing, but no systematic analysis of the impact of system parameters on positioning accuracy is available. This paper fills this gap by introducing ViFi, an indoor positioning system that relies on RSS prediction based on Multi-Wall Multi-Floor (MWMF) propagation model to generate a discrete RSS radiomap (virtual fingerprints). Extensive experimental results, obtained in multiple independent testbeds, show that ViFi outperforms virtual fingerprinting systems adopting simpler propagation models in terms of accuracy, and allows a sevenfold reduction in the number of measurements to be collected, while achieving the same accuracy of a traditional fingerprinting system deployed in the same environment. Finally, a set of guidelines for the implementation of ViFi in a generic environment, that saves the effort of collecting additional measurements for system testing and fine tuning, is proposed.

In the last years, the Internet of Things (IoT) has emerged as a key application context in the design and evolution of technologies in the transition toward a 5G ecosystem. More and more IoT technologies have entered the market and represent important enablers in the deployment of networks of interconnected devices. As network and spatial device densities grow, energy efficiency and consumption are becoming an important aspect in analyzing the performance and suitability of different technologies. In this framework, this survey presents an extensive review of IoT technologies, including both Low-Power Short-Area Networks (LPSANs) and Low-Power Wide-Area Networks (LPWANs), from the perspective of energy efficiency and power consumption. Existing consumption models and energy efficiency mechanisms are categorized, analyzed and discussed, in order to highlight the main trends proposed in literature and standards toward achieving energy-efficient IoT networks. Current limitations and open challenges are also discussed, aiming at highlighting new possible research directions.

Multi-armed bandit (MAB) models are a viable approach to describe the problem of best wireless network selection by a multi-Radio Access Technology (multi-RAT) device, with the goal of maximizing the quality perceived by the final user. The classical MAB model does not allow, however, to properly describe the problem of wireless network selection by a multi-RAT device, in which a device typically performs a set of measurements in order to collect information on available networks, before a selection takes place. The MAB model foresees in fact only one possible action for the player, which is the selection of one among different arms at each time step; existing arm selection algorithms thus mainly differ in the rule according to which a specific arm is selected. This work proposes a new MAB model, named measure-use-MAB (muMAB), aiming at providing a higher flexibility, and thus a better accuracy in describing the network selection problem. The muMAB model extends the classical MAB model in a twofold manner; first, it foresees two different actions: to measure and to use; second, it allows actions to span over multiple time steps. Two new algorithms designed to take advantage of the higher flexibility provided by the muMAB model are also introduced. The first one, referred to as measure-use-UCB1 (muUCB1) is derived from the well known UCB1 algorithm, while the second one, referred to as Measure with Logarithmic Interval (MLI), is appositely designed for the new model so to take advantage of the new measure action, while aggressively using the best arm. The new algorithms are compared against existing ones from the literature in the context of the muMAB model, by means of computer simulations using both synthetic and captured data. Results show that the performance of the algorithms heavily depends on the Probability Density Function (PDF) of the reward received on each arm, with different algorithms leading to the best performance depending on the PDF. Results highlight, however, that as the ratio between the time required for using an arm and the time required to measure increases, the proposed algorithms guarantee the best performance, with muUCB1 emerging as the best candidate when the arms are characterized by similar mean rewards, and MLI prevailing when an arm is significantly more rewarding than others. This calls thus for the introduction of an adaptive approach capable of adjusting the behavior of the algorithm or of switching algorithm altogether, depending on the acquired knowledge on the PDF of the reward on each arm.

In overloaded Massive MIMO (mMIMO) systems, wherein the number K of user equipments (UEs) exceeds the number of base station antennas M, it has recently been shown that non-orthogonal multiple access (NOMA) can increase the sum spectral efficiency. This paper aims at identifying cases where code-domain NOMA can improve the spectral efficiency of mMIMO in the classical regime where K <; M. Novel spectral efficiency expressions are provided for the uplink and downlink with arbitrary spreading signatures and spatial correlation matrices. Particular attention is devoted to the planar arrays that are currently being deployed in pre-5G and 5G networks (in sub-$6$ GHz bands), which are characterized by limited spatial resolution. Numerical results show that mMIMO with such planar arrays can benefit from NOMA in scenarios where the UEs are spatially close to each other. A two-step UE grouping scheme is proposed for NOMA-aided mMIMO systems that is applicable to the spatial correlation matrices of the UEs that are currently active in each cell. Numerical results are used to investigate the performance of the algorithm under different operating conditions and types of spreading signatures (orthogonal, sparse and random sets). The analysis reveals that orthogonal signatures provide the highest average spectral efficiency.

Spectral efficiency of low-density spreading nonorthogonal multiple access channels in the presence of fading is derived for linear detection with independent decoding as well as optimum decoding. The large system limit, where both the number of users and number of signal dimensions grow with fixed ratio, called load, is considered. In the case of optimum decoding, it is found that low-density spreading underperforms dense spreading for all loads. Conversely, linear detection is characterized by different behaviors in the underloaded vs. overloaded regimes. In particular, it is shown that spectral efficiency changes smoothly as load increases. However, in the overloaded regime, the spectral efficiency of low-density spreading is higher than that of dense spreading.

Tens of different IoT platforms are currently available on the market as a result of the high interest in IoT, characterized by very different characteristics in terms of utilization models, features and availability. This paper provides a review of existing platforms, both adopting a closed source and an open source access model, focusing on five evaluation criteria: communication protocols, data visualization, data processing, integration with external services and security. Afterward, the paper focuses on ten open source platforms, that are deemed more suitable for research and development activities in academia, and provides an evaluation of such platforms according to the five criteria previously defined, combined with two criteria specific to open source platforms: installation procedure and documentation. The evaluation indicates that the FIWARE platform is the best suited platform when taking into account the combination of the seven criteria; other platforms might, however, be preferred, depending on the context, thanks to specific features such as native support for a programming language, or ease and flexibility in the installation procedure.