Recent developments in nanotechnology herald nanometer-sized devices expected to bring light to a number of groundbreaking applications. Communication with and among nanodevices will be needed for unlocking the full potential of such applications. As the traditional communication approaches cannot be directly applied in nanocommunication, several alternative paradigms have emerged. Among them, electromagnetic nanocommunication in the terahertz (THz) frequency band is particularly promising, mainly due to the breakthrough of novel materials such as graphene. For this reason, numerous research efforts are nowadays targeting THz band nanocommunication and consequently nanonetworking. As it is expected that these trends will continue in the future, we see it beneficial to summarize the current status in these research domains. In this survey, we therefore aim to provide an overview of the current THz nanocommunication and nanonetworking research. Specifically, we discuss the applications envisioned to be supported by nanonetworks operating in the THz band, together with the requirements such applications pose on the underlying nanonetworks. Subsequently, we provide an overview of the current contributions on the different layers of the protocol stack, as well as the available channel models and experimentation tools. Finally, we identify a number of open research challenges and outline several future research directions.
1 December 2022 in IEEE Transactions on Communications
Terahertz (THz) communications are envisioned as a key technology of next-generation wireless systems due to its ultra-broad bandwidth. One step forward, THz integrated sensing and communication (ISAC) system can realize both unprecedented data rates and millimeter-level accurate sensing. However, THz ISAC meets stringent challenges on waveform and receiver design to fully exploit the peculiarities of THz channel and transceivers. In this work, a sensing integrated discrete Fourier transform spread orthogonal frequency division multiplexing (SI-DFT-s-OFDM) system is proposed for THz ISAC, which can provide lower peak-to-average power ratio than OFDM and is adaptive to flexible delay spread of the THz channel. Without compromising communication capabilities, the proposed SI-DFT-s-OFDM realizes millimeter-level range estimation and decimeter-per-second-level velocity estimation accuracy. In addition, the bit error rate (BER) performance is improved by 5 dB gain at the 10 -3 BER level compared with OFDM. At the receiver, a deep learning based ISAC receiver with two neural networks is developed to recover transmitted data and estimate target range and velocity, while mitigating the imperfections and non-linearities of THz systems. Extensive simulation results demonstrate that the proposed deep learning methods can realize mutually enhanced performance for communication and sensing, and is robust against Doppler effects, phase noise and multi-target estimation.
2 April 2019 in IEEE Transactions on Mobile Computing
Widespread adoption of indoor positioning systems based on WiFi fingerprinting is at present hindered by the large efforts required for measurements collection during the offline phase. Two approaches were recently proposed to address such issue: crowdsourcing and RSS radiomap prediction, based on either interpolation or propagation channel model fitting from a small set of measurements. RSS prediction promises better positioning accuracy when compared to crowdsourcing, but no systematic analysis of the impact of system parameters on positioning accuracy is available. This paper fills this gap by introducing ViFi, an indoor positioning system that relies on RSS prediction based on Multi-Wall Multi-Floor (MWMF) propagation model to generate a discrete RSS radiomap (virtual fingerprints). Extensive experimental results, obtained in multiple independent testbeds, show that ViFi outperforms virtual fingerprinting systems adopting simpler propagation models in terms of accuracy, and allows a sevenfold reduction in the number of measurements to be collected, while achieving the same accuracy of a traditional fingerprinting system deployed in the same environment. Finally, a set of guidelines for the implementation of ViFi in a generic environment, that saves the effort of collecting additional measurements for system testing and fine tuning, is proposed.
mmWave (millimeter-Wave) is a very promising technology for the future wireless communication. To mitigate its high attenuation characteristics, mmWave communication frequently employs directional beamforming for both transmission and reception. Localization commonly takes advantage of directionality in RF frequencies in urban and indoor environments. In this paper, we use lessons learned from classical RF-based localization for discussing a set of feasible localization approaches in the context of mmWave bands. We further map the requirements of each discussed localization approach to design requirements for future mmWave devices and assess the expected accuracy of such approaches for a set of realistic scenarios. Our results show that mmWave-based localization is promising in both its availability and accuracy, even in the presence of a limited number of localization anchor nodes.
Over the last few years, the number of indoor localization solutions has grown exponentially, and a wide variety of different technologies and approaches are being explored. Unfortunately, there is currently no established standardized evaluation method for comparing their performance. As a result, each solution is evaluated in a different environment using proprietary evaluation metrics. Consequently, it is currently extremely hard to objectively compare the performance of multiple localization solutions with each other. To address the problem, we present the EVARILOS Benchmarking Platform, which enables automated evaluation and comparison of multiple solutions in different environments using multiple evaluation metrics. We propose a testbed-independent benchmarking platform, combined with multiple testbed-dependent plugins for executing experiments and storing performance results. The platform implements the standardized evaluation method described in the EVARILOS Benchmarking Handbook, which is aligned with the upcoming ISO/IEC 18305 standard “Test and Evaluation of Localization and Tracking Systems.” The platform and plug-ins can be used in real time on existing wireless testbed facilities, while also supporting a remote offline evaluation method using precollected data traces. Using these facilities, and analyzing and comparing the performance of three different localization solutions, we demonstrate the need for objective evaluation methods that consider multiple evaluation criteria in different environments.
Practical location estimation is never ideal and each location estimate is burdened with a certain level of error. In many use-case scenarios, knowing the magnitude of these errors can significantly improve the usability of the location estimates. The localization errors for different localization approaches are currently assessed using static performance benchmarks. These benchmarks typically provide aggregate metrics that statistically characterize the localization errors across the entire deployment environment. Due to the potentially dynamic nature and spatial heterogeneity of the environment, this characterization can be too generic to be really useful from the point of view of an individual location estimate. To address this issue for fingerprinting-based localization, we propose a regression-based procedure for estimating individual (i.e. per-location estimate) localization errors. We use Received Signal Strength (RSS) values from various locations in an environment, as well as the observed localization errors in case location estimates are generated using these RSS values, for training a number of contemporary regression models. Using the trained models, we are able to estimate the localization error of a location estimate at a new location using only RSS values collected at that location. Both by simulation and experimentally, we demonstrate the feasibility of the proposed procedure for WiFi-based indoor, and LoRa and SigFox-based outdoor fingerprinting approaches. We do that by showing that the proposed procedure can, in the best-case scenario, yield more than 50% more accurate estimation than the reference procedure based on average localization errors derived from static performance benchmarks.