Chao Kang

Dr. Chao Kang

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 June 2024 in Materials
Verified
Journal Article
Open access
PDF file
PKParipat KRAISORNKACHIT
Paripat KRAISORNKACHIT
MNMasanobu Naito
Masanobu Naito
CKChao Kang
Chao Kang
CSChiaki Sato
Chiaki Sato
Studying multiple properties of a material concurrently is essential for obtaining a comprehensive understanding of its behavior and performance. However, this approach presents certain challenges. For instance, simultaneous examination of various properties often necessitates extensive experimental resources, thereby increasing the overall cost and time required for research. Furthermore, the pursuit of desirable properties for one application may conflict with those needed for another, leading to trade-off scenarios. In this study, we focused on investigating adhesive joint strength and elastic modulus, both crucial properties directly impacting adhesive behavior. To determine elastic modulus, we employed a non-destructive indentation method for converting hardness measurements. Additionally, we introduced a specimen apparatus preparation method to ensure the fabrication of smooth surfaces and homogeneous polymeric specimens, free from voids and bubbles. Our experiments utilized a commercially available bisphenol A-based epoxy resin in combination with a Poly(propylene glycol) curing agent. We generated an initial dataset comprising experimental results from 32 conditions, which served as input for training a machine learning model. Subsequently, we used this model to predict outcomes for a total of 256 conditions. To address the high deviation in prediction results, we implemented active learning approaches, achieving a 50% reduction in deviation while maintaining model accuracy. Through our analysis, we observed a trade-off boundary (Pareto frontier line) between adhesive joint strength and elastic modulus. Leveraging Bayesian optimization, we successfully identified experimental conditions that surpassed this boundary, yielding an adhesive joint strength of 25.2 MPa and an elastic modulus of 182.5 MPa.

3 February 2023 in Journal of Fluids and Structures
Verified
Journal Article
Closed access
CKChao Kang
Chao Kang
IIIkki Ikeda
Ikki Ikeda
MSMotoki Sakaguchi
Motoki Sakaguchi

14 May 2024 in International Journal of Heat and Mass Transfer
Verified
Journal Article
Open access
CKChao Kang
Chao Kang
IIIkki Ikeda
Ikki Ikeda
MSMotoki Sakaguchi
Motoki Sakaguchi

1 February 2023 in The Journal of Adhesion
Verified
Journal Article
Open access
CKChao Kang
Chao Kang
José MachadoJosé Machado
José Machado
Yu SekiguchiYu Sekiguchi
Yu Sekiguchi
MJMing Ji
Ming Ji
CSChiaki Sato
Chiaki Sato
MNMasanobu Naito
Masanobu Naito
Machine learning is extensively used in material research and development, including adhesion technology. However, it requires a large dataset to train the models for optimizing, developing, and designing new adhesives. This study proposes a novel testing machine that enables quick high-throughput measurements of the shear strength of adhesively bonded joints. A small cylindrical butt shear joint (BSJ) specimen placed in a holder was pushed by a metal specimen pusher until failure; during this process, the force and displacement were recorded. This testing machine can be used to quickly conduct the measurement by simply placing the specimen in a holder and pushing it. A comparison of the average shear strength measured by this method and that measured by single-lap shear tests, coupled with stress analysis using finite element simulation suggested that the proposed method can measure the shear strength more accurately, where a higher level of pure shear can be achieved in the adhesive layers with a lower degree of stress concentration and smaller peeling stress at the extremities of the adhesives. This indicates that the shear strength of adhesively bonded joints can be measured quickly using the proposed testing method, thereby facilitating the development of new adhesives using machine learning.

31 October 2025 in Coatings
Verified
Journal Article
Open access
PDF file
CKChao Kang
Chao Kang
MSMotoki Sakaguchi
Motoki Sakaguchi
The impingement of a molten droplet on a solid surface, forming a “splat,” is a fundamental phenomenon observed across numerous industrial surface engineering techniques. For example, thermal spray deposition is widely used to create metal, ceramic, polymer, and composite coatings that are vital for aerospace, biomedical, electronics, and energy applications. Significant progress has been made in understanding droplet impact behavior, largely driven by advancements in high-resolution and high-speed imaging techniques, as well as computational resources. Although droplet impact dynamics, splat morphology, and interfacial bonding mechanisms have been extensively reviewed, a comprehensive overview of the mechanical behaviors of single splats, which are crucial for coating performance, has not been reported. This review bridges that gap by offering an in-depth analysis of bonding strength and residual stress in single splats. The various experimental techniques used to characterize these properties are thoroughly discussed, and a detailed review of the analytical models and numerical simulations developed to predict and understand residual stress evolution is provided. Notably, the complex interplay between bonding strength and residual stress is then discussed, examining how these two critical mechanical attributes are interrelated and mutually influence each other. Subsequently, effective strategies for improving interfacial bonding are explored, and key factors that influence residual stress are identified. Furthermore, the fundamental roles of splat flattening and formation dynamics in determining the final mechanical properties are critically examined, highlighting the challenges in integrating fluid dynamics with mechanical analysis. Thermal spraying serves as the primary context, but other relevant applications are briefly considered. Cold spray splats are excluded because of their distinct bonding and stress generation mechanisms. Finally, promising future research directions are outlined to advance the understanding and control of the mechanical properties in single splats, ultimately supporting the development of more robust and reliable coating technologies.

9 January 2026 in Polymer Testing
Verified
Journal Article
Open access
CKChao Kang
Chao Kang
YOYoichi Okamoto
Yoichi Okamoto
MJMing Ji
Ming Ji
KIKeiyu Ikeda
Keiyu Ikeda
YSYu Sekiguchi
Yu Sekiguchi
CSChiaki Sato
Chiaki Sato