Chiaki Sato

Prof. Chiaki Sato


Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 November 2019 in Chemical Communications
Verified
Journal Article
Open access
PDF file
KSKazuhiro Sensui
Kazuhiro Sensui
TTTaishi Tarui
Taishi Tarui
TMTakayuki Miyamae
Takayuki Miyamae
CSChiaki Sato
Chiaki Sato
Sum frequency generation spectroscopy was applied to confirm the presence of a chemical bond at the joining interfaces, suggesting that MDI primers can serve as a chemical bridge for urethane adhesives.

31 March 2021 in Materials
Verified
Journal Article
Open access
PDF file
Yu SekiguchiYu Sekiguchi
Yu Sekiguchi
CSChiaki Sato
Chiaki Sato
With an increasing demand for adhesives, the durability of joints has become highly important. The fatigue resistance of adhesives has been investigated mainly for epoxies, but in recent years many other resins have been adopted for structural adhesives. Therefore, understanding the fatigue characteristics of these resins is also important. In this study, the cyclic fatigue behavior of a two-part acrylic-based adhesive used for structural bonding was investigated using a fracture-mechanics approach. Fatigue tests for mode I loading were conducted under displacement control using double cantilever beam specimens with varying bond-line thicknesses. When the fatigue crack growth rate per cycle, da/dN, reached 10−5 mm/cycle, the fatigue toughness reduced to 1/10 of the critical fracture energy. In addition, significant changes in the characteristics of fatigue crack growth were observed varying the bond-line thickness and loading conditions. However, the predominance of the adhesive thickness on the fatigue crack growth resistance was confirmed regardless of the initial loading conditions. The thicker the adhesive bond line, the greater the fatigue toughness.

27 February 2019 in The Journal of Adhesion
Verified
Journal Article
Open access
MNM. Nakanouchi
M. Nakanouchi
CSChiaki Sato
Chiaki Sato
Yu SekiguchiYu Sekiguchi
Yu Sekiguchi
KHK. Haraga
K. Haraga
HUH. Uno
H. Uno
A method for fabricating adhesively bonded joints with graded properties along the bond-line was proposed. By utilizing two types of acrylic adhesives, one hard and the other soft, the properties of the mixture were changed by controlling the mixing ratio. An applicator for the adhesives was developed and used for the experiments, in which property-graded adhesive layers were actually produced. The properties, i.e., stress-strain curves at various points of the property-graded adhesive layer, were experimentally measured, and the validity of the proposed method was confirmed. The Young’s moduli at multiple points of the adhesive layer changed from 34.7 MPa to 634 MPa by changing the mixing ratio of the adhesives.

19 March 2020 in The Journal of Adhesion
Verified
Journal Article
Closed access
NTNao Terasaki
Nao Terasaki
KSK. Shimamoto
K. Shimamoto
HAH. Akiyama
H. Akiyama
CSChiaki Sato
Chiaki Sato
The improvement in adhesion technology for joining different types of materials has led to expectations of weight reduction in cars and commercial vehicles. Various levels of stress and stress ratios are loaded onto the joints of such transport vehicles. Therefore, the fatigue shear strength of an adhesive lap joint is important. This study is related to the fatigue properties of structural adhesive joints. Lap-joint specimens using epoxy adhesive were prepared, and fatigue tests with four different stress ratios were conducted. Subsequently, the fatigue limit diagram was plotted, and the effect of stress ratio on the fatigue limit was investigated. Moreover, the strength of the specimens subjected to various cyclic stress levels was investigated systemically. With cyclic shear stress, the influence of the shear stress amplitude on the resistance to fatigue failure was more significant than that of the number of cycles. The specimens that endured the fatigue tests maintained approximately the same shear strength as that of the as-received specimens. The findings of this study can provide important guidance for the design of a car body.

10 June 2020 in The Journal of Adhesion
Verified
Journal Article
Closed access
KSK. Shimamoto
K. Shimamoto
SBS. Batorova
S. Batorova
KHK. Houjou
K. Houjou
HAH. Akiyama
H. Akiyama
CSChiaki Sato
Chiaki Sato
Adhesive properties are often affected by water. In this study, to clarify the water-resistant properties of a thermosetting epoxy adhesive containing dicyandiamide (DICY) and carboxyl-terminated butadiene acrylonitrile rubber (CTBN), immersion tests of open-faced specimens and bulk specimens in water were performed, and the changes in the properties were investigated in terms of chemistry and mechanical strength. After immersing the open-faced specimens in water, the mechanical strengths were evaluated by two different methods: interfacial cutting method and secondary bonding method. Using both methods, a decrease in strength with immersion time was obtained, and the tendencies of the strength change were found to be very similar for the different evaluation methods. Chemical changes were also evaluated by infrared spectroscopy. Through periodical measurements of the infrared spectra of a fully-cured bulk adhesive specimen during water immersion, the chemical degradation of the epoxy adhesive containing DICY and CTBN was investigated, revealing an association with the change in mechanical strength in which hydrolysis of the cyano groups in DICY and CTBN led to a decrease in strength. Strength recovery experiments were also conducted by drying the specimens after water immersion, determining that the mechanical recovery strength changed with water temperature and immersion time.

12 June 2024 in Materials
Verified
Journal Article
Open access
PDF file
PKParipat KRAISORNKACHIT
Paripat KRAISORNKACHIT
MNMasanobu Naito
Masanobu Naito
CKChao Kang
Chao Kang
CSChiaki Sato
Chiaki Sato
Studying multiple properties of a material concurrently is essential for obtaining a comprehensive understanding of its behavior and performance. However, this approach presents certain challenges. For instance, simultaneous examination of various properties often necessitates extensive experimental resources, thereby increasing the overall cost and time required for research. Furthermore, the pursuit of desirable properties for one application may conflict with those needed for another, leading to trade-off scenarios. In this study, we focused on investigating adhesive joint strength and elastic modulus, both crucial properties directly impacting adhesive behavior. To determine elastic modulus, we employed a non-destructive indentation method for converting hardness measurements. Additionally, we introduced a specimen apparatus preparation method to ensure the fabrication of smooth surfaces and homogeneous polymeric specimens, free from voids and bubbles. Our experiments utilized a commercially available bisphenol A-based epoxy resin in combination with a Poly(propylene glycol) curing agent. We generated an initial dataset comprising experimental results from 32 conditions, which served as input for training a machine learning model. Subsequently, we used this model to predict outcomes for a total of 256 conditions. To address the high deviation in prediction results, we implemented active learning approaches, achieving a 50% reduction in deviation while maintaining model accuracy. Through our analysis, we observed a trade-off boundary (Pareto frontier line) between adhesive joint strength and elastic modulus. Leveraging Bayesian optimization, we successfully identified experimental conditions that surpassed this boundary, yielding an adhesive joint strength of 25.2 MPa and an elastic modulus of 182.5 MPa.