Ramasamy Nallamuthu

Dr. Ramasamy Nallamuthu


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 May 2019 in Bulletin of Materials Science
Verified
Journal Article
Open access
PDF file
RNRamasamy Nallamuthu
Ramasamy Nallamuthu
VAV Arumugam
V Arumugam
SRS Rajkumar
S Rajkumar
The present study addresses the enhancement of interfacial interaction between Kevlar and epoxy through surface modification of Kevlar fabric using various chemical treatments. The chemically modified aramid surface was examined by Fourier transformed infrared spectroscopy, energy dispersive spectroscopy, scanning electron microscopy (SEM), dynamic mechanical analysis and wettability characteristics. The Kevlar/epoxy composites were prepared using the hand lay-up process. Furthermore, the influence of surface modification was validated through the mechanical characteristics of Kevlar/epoxy composites. The study reveals that the chemical treatment of the Kevlar surface increases the polar functional groups and improves the interfacial adhesion between fibre and epoxy. The surface energy, work of adhesion and performance of Kevlar composites were studied for treated and untreated fibres. The tensile and flexural moduli were increased up to 38% in treated Kevlar fibre compared with untreated fibre. It was observed from SEM analysis that adhesive failure bonds rely on chemical bonds at the interface of fibre matrix composites and cohesive failure at the fibre matrix was decreased.

25 May 2021 in Journal of Adhesion Science and Technology
Verified
Journal Article
Closed access
RNRamasamy Nallamuthu
Ramasamy Nallamuthu
AVArumugam V
Arumugam V
SCSuresh Kumar C
Suresh Kumar C
The weak interfacial properties of kevlar/epoxy composites are the main limitation in applications. This work focuses to improve interfacial adhesion in kevlar/epoxy composites by various concentrations of phosphoric acid (PA) pre-treatment followed by Epichlorohydrin (ECH) treatment with different time periods. The fiber surface modification was studied through X-ray diffractometer (XRD), energy dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FTIR) and Field emission scanning electron microscopy (FESEM). The interfacial adhesion was investigated by conducting flexural, quasi-static indentation (QSI) and flexural after indentation (FAI) tests with acoustic emission (AE) monitoring. The results reveal that the crystallinity index was decreased by 20.35% with increased polar functional groups in treated kevlar fiber surfaces. However, the optimum treatment condition was confirmed from flexural properties and AE results. It was observed that 15% PA with 1 h ECH treatment is much effectively improving the resistance to debonding and delamination failure modes in comparison with untreated kevlar composites. It was also evidenced from the reduction in residual flexural of untreated and optimized treated composites by 56.36 and 48.35%, respectively. Moreover, acoustic emission results reveal that the percentage of hits corresponding to the failure modes such as debonding and delamination failure are significantly reduced in the case of optimized treated fiber composites.

1 June 2022 in Materials Testing
Verified
Journal Article
Closed access
JVJayaseelan Veerasundaram
Jayaseelan Veerasundaram
KKKalaichelvan Kani
Kalaichelvan Kani
SMSeeman Murugesan
Seeman Murugesan
RNRamasamy Nallamuthu
Ramasamy Nallamuthu
Manufacturers often employ the extrusion process to form an object with any cross-section. An experiment was carried out to examine the effect of die angle on the quality of the extruded product. The four types of extrusion dies were designed for finding the desirable quality of aluminium composite extruded billet. The five percentages of the Silicon carbide have been chosen as reinforcement with aluminium alloys. Further, the various extrusion dies configurations were considered as 12:8, 12:2, 12:4, and 8:4 for producing the extruded billets. In addition, the die angles that correspond to the required minimum extrusion load were determined. According to the findings, 12:8 extrusion configurations with a 30° die angle produced the desired quality billet and fine grain structure of extruded product with reduced extrusion load. The extruded billet surface quality was analyzed by scanning electron microscopy.

21 March 2024 in Polymer Composites
Verified
Journal Article
Closed access
PDF file
RNRamasamy Nallamuthu
Ramasamy Nallamuthu
AVArumugam Vellayaraj
Arumugam Vellayaraj
SCSuresh Kumar Chelliah
Suresh Kumar Chelliah
PBPrabhu Bose
Prabhu Bose
ATArunkumar Thirugnanasamabandam
Arunkumar Thirugnanasamabandam

17 March 2023 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Verified
Journal Article
Closed access
JVJayaseelan Veerasundaram
Jayaseelan Veerasundaram
KKKalaichelvan Kani
Kalaichelvan Kani
RNRamasamy Nallamuthu
Ramasamy Nallamuthu
Muthuramalingam ThangarajMuthuramalingam Thangaraj
Muthuramalingam Thangaraj
Lubricants are necessary for metal forming to avoid direct contact, adhesion, transfer, and scratches from materials and tools. It is also essential for increasing tool durability and reducing energy use. The work aims to study the effects of lubricants and billet geometry on the extrusion of AA6063/5% SiCp. The lubricants were used such as graphite, zinc stearate, and molybdenum disulphide. The friction factor has been determined by the lubricant effect and billet geometry. The simulation was done for the lubricated condition which was compared with experimental results. It was found that improved billet quality was obtained by the graphite-lubricated 12:8 configuration die profile. Also, the friction factor for the graphite-lubricated 12:8 configuration dies profile was 10.5% less compared to other configure profiles. Scanning electron microscopy was used to investigate the surface of the lubricated extruded component, and samples were examined utilizing energy-dispersive X-ray analyses.

21 May 2023 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Verified
Journal Article
Closed access
MGMahadevan G
Mahadevan G
STSenthilkumar T
Senthilkumar T
RNRamasamy Nallamuthu
Ramasamy Nallamuthu
The bead profile geometry of aluminum alloy has been taken for investigation and the influence of alternate gases in the gas metal arc welding (GMAW) process. In the GMAW process, welding currents of 105 A, 120 A, 135 A, and 150 A are considered for evaluating the weld parameters. Further, the influence of various alternating duration of argon (Ar) and helium (He) shielding gases on the GMAW process has been investigated. Consequently, the alternating duration between shielding gases is used as 0.25 s (He) and 0.75 s (Ar), 0.5 s (He) and 0.5 s (Ar), and pure argon for joining the AA6061 alloy plates. It is found that the 0.5 s (Ar) and 0.5 s (He) shielding gases promoted fewer porosity effects compared with other alternating shielding gas and pure argon. Also, the microhardness and depth of penetration were significantly improved in 0.5 s (Ar) and 0.5 s (He) compared with 0.75 s (Ar) and 0.25 s (He) and pure argon shielding gas. The welded surface morphological study has been conducted for further evaluation of welding currents and shielding gas effects in the GMAW process.