The scientific and reasonable maintenance strategy is critical to ensure the continuous operation of stationary equipment in the petrochemical industry; both risk-based inspection (RBI) and integrity operating windows (IOWs) are effective for stationary equipment maintenance. In traditional static RBI, the risk is assumed to remain constant in whole inspection period, and the latest variations of medium and process parameters are not fed back into risk calculation. Thus, risk value may be overestimated or underestimated, leading to unexpected failures or excessive inspection. Integrated application of dynamic risk-based inspection (DRBI) and IOWs is an advanced direction for this problem. However, due to the complexity of dynamic interaction mechanisms and risk assessment algorithms as well as the deficiency of powerful software, industrial applications of DRBI and IOWs are still limited. By proposing improved dynamic risk indexes and real-time monitoring process parameters as well as utilizing them in DRBI assessment, this article proposes an integrated DRBI-IOWs method and develops a corresponding system. Further, the method and system are applied in a crude distillation unit. The results show that DRBI-IOWs provide direct and real-time insights into the actual risk and give early warning to the process parameter controls, which is important to control the equipment risk of sudden failures.
Severe erosion phenomena often occur in industrial polycrystalline silicon units, leading to hydrogen leakage accidents and affecting long-term operation. It is favorable to use a computational fluid dynamics (CFD) simulation with the dense discrete phase model (DDPM) and the sub-grid energy-minimization multi-scale (EMMS) drag model to improve the prediction accuracy of complex multiphase erosion phenomena in a connecting pipe of an industrial polycrystalline silicon unit. Furthermore, the effect of droplet the specularity coefficient on boundary conditions is thoroughly considered. The predicted erosion behaviors are consistent with industrial data. The effects of operations parameters were discussed with three-dimensional CFD simulation, including droplet size and hydrogen volume fraction on erosion behaviors. The results indicated that the non-uniform multiphase erosion flow behavior near the wall can be simulated accurately with the EMMS drag model in a coarse mesh. A suitable droplet specularity coefficient such as 0.5 can also improve the accuracy of erosion position. Small liquid droplets, such as those of 30 μm size, will follow the gas phase better and have a lower erosion rate. The inertia effect of large droplets, such as those of 150 μm size, plays a dominant role, resulting in obvious erosion on the elbow walls. The erosion range and thinning rate enlarge with the increase in hydrogen volume fraction. A few silicon solid particles, such as 0.01% volume fraction, change local flow behaviors and probably cause the variation of local erosion positions. The process of erosion deformation first circumferentially extended and then accelerated at the local center position deeper.
Hydrogenation reactors are critical equipment in the petrochemical industry, yet their material degradation is governed by coupled multi-mechanism damage. Current assessment practices largely neglect this complexity, remaining single-factor oriented and overlooking synergistic interactions and temporal evolution. This paper proposes a regionally differentiated, multi-level framework integrating 5 primary and 17 secondary indicators with a hybrid AHP-EWM weighting strategy that synthesizes expert knowledge and measured data. A multi-factor coupling correction coefficient is introduced to provide a preliminary estimate of the synergistic acceleration effect among damage mechanisms, while a GM(1,1) gray model enables dynamic trend prediction. Applied to a 25-year 2.25Cr-1Mo steel reactor, the method produces regional degradation values of 0.378, 0.607, and 0.533 for the base metal, welds, and cladding layer, respectively, with an overall baseline of 0.453 rising by 11% to 0.503 after coupling correction. Compared with exponential regression, ARIMA, and BP neural networks, GM(1,1) is selected for its balanced performance in small-sample fitting, extrapolation stability, and physical interpretability. Sensitivity analysis confirms stable degradation grading even with ±50% coupling coefficient variations. The proposed approach mitigates the underestimation inherent in conventional single-mechanism assessments and offers a quantitative tool for full-lifecycle risk management and predictive maintenance of hydrogenation reactors.