Intraoral scanners used for the fabrication of milled and 3D-printed complete dentures simplify the procedure. However, its effectiveness in recording the functional peripheral seal area needs to be researched. Therefore, this study aims to assess the retention of conventional, milled and 3D-printed denture bases made from conventional impression technique and digital scans in different types of post palatal seal area. Completely edentulous participants were divided into group A and group B based on type of posterior palatal seal area. Each group received three denture bases fabricated using compression molding, milling and 3D printing. The retention was evaluated using a digital dynamometer at 45° and 90° inclination. The ANOVA test revealed statistically significant difference in the retention of denture bases fabricated using three different techniques. When compared between the three groups at 45 and 90°, statistically significant difference in the retentive values between the control and other two groups were observed. All three of the fabrication processes have retention that falls within a clinically acceptable range. 3D printed dentures had better adaptation on the PPS area whereas the milled dentures had a better peripheral seal although the conventional process showed highest retention values.
Background/Objectives: Additive manufacturing (AM) technology has emerged as an innovative approach in dentistry. Recently, manufacturers have developed permanent resins engineered explicitly for the fabrication of definitive prostheses using AM techniques. This systematic review evaluated the mechanical and physical properties of 3D-printed permanent resins in comparison to milled resins and hybrid ceramics for the fabrication of indirect dental restorations. Methods: Three electronic databases—Scopus, Web of Science, and PubMed—were searched for English-language articles. Two independent researchers conducted study selection, data extraction, quality assessment, and the evaluation of the certainty of evidence. In vitro studies assessing the mechanical and physical properties of the permanent resins were included in this review. Results: A total of 1779 articles were identified through electronic databases. Following full-text screening and eligibility assessment, 13 studies published between 2023 and 2024 were included in this qualitative review. The investigated outcomes included physical properties (surface roughness, color changes, water sorption/solubility) and mechanical properties (flexural strength, elastic modulus, microhardness). Conclusions: Three-dimensionally printed permanent resins show promising potential for fabricating indirect dental restorations. However, the current evidence regarding their mechanical and physical properties remain limited and inconsistent, mainly due to variability in study methodologies.