Simon Sanchez-Diaz

Dr. Simon Sanchez-Diaz

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 February 2023 in Journal of Natural Fibers
Verified
Journal Article
Open access
SSSimon Sanchez-Diaz
Simon Sanchez-Diaz
COCarl Ouellet
Carl Ouellet
Said ElkounSaid Elkoun
Said Elkoun
MRMathieu Robert
Mathieu Robert
The use of natural fibers is a sustainable alternative for developing reinforced-polymer composites. It is believed that the seed flosses of common milkweed, Asclepias Syriraca, may be a promising reinforcing fiber given its uncommon hollow microstructure that is associated with both high specific properties and outstanding insulating capacities. This study presents an overview of the properties of milkweed floss and its potential use in reinforced-polymer composites. Milkweed flosses from Quebec were analyzed to determine their overall dimensions, density, porosity, coefficient of acoustic absorption, thermal conductivity, thermal resistance, and elastic modulus. In parallel, a portion of milkweed fibers was treated with acetone to modify their surface, and the properties of the treated fibers were measured and compared against the characteristics of the original fibers. Infrared spectroscopy was employed to assess differences between the chemical groups on the surface of treated and native fibers. The treatment with acetone removed fatty acids, waxes, and free sugars from the fibers’ surface. The acetone treatment did not affect the fibers’ microstructure nor their acoustic absorption capacity. The acetone-treated fibers showed greater thermal resistance and a higher thermal conductivity than native milkweed floss. The elastic modulus of milkweed decreased by nearly 49% after the acetone treatment.

7 February 2023 in Polymer Composites
Verified
Journal Article
Open access
SSSimon Sanchez-Diaz
Simon Sanchez-Diaz
COCarl Ouellet
Carl Ouellet
Said ElkounSaid Elkoun
Said Elkoun
MRMathieu Robert
Mathieu Robert
Milkweed floss was used as a reinforcement to develop lightweight epoxy composites with enhanced thermal insulating properties. Seed fibers from Asclepias Syriaca harvested in Quebec were used for this study. Some fibers were treated with acetone to remove their protective hydrophobic coating. Epoxy resin was blended with 15% w/w of native or acetone‐treated milkweed floss to form prepregs. The prepregs were casted into molds, degassed, and compressed to produce the composites. The composites were passed through a post‐curing phase before characterization. The composites and the epoxy resin alone were characterized to determine their density, porosity, thermal conductivity, thermal degradation, mechanical resistance, and thermo‐mechanical behavior. The composites reinforced with native or acetone‐treated milkweed floss were 7.4% and 10.3% lighter than the epoxy resin, respectively. The specific elastic modulus of the resin increased by 9.6% and 20.1% with the addition of native or acetone‐treated fibers, respectively. The thermal conductivity of the epoxi decreased by 7.8% and 15.6% with the use of native or acetone‐treated milkweed floss, respectively. Due to their low weight and reduced thermal conductivity, the milkweed‐reinforced epoxy composites may find applications in the production of structural and insulating elements for vehicles and buildings.

16 August 2024 in Waste
Verified
Journal Article
Open access
PDF file
ZBZakariae Belmokhtar
Zakariae Belmokhtar
SSSimon Sanchez-Diaz
Simon Sanchez-Diaz
PCPatrice Cousin
Patrice Cousin
Said ElkounSaid Elkoun
Said Elkoun
MRMathieu Robert
Mathieu Robert
This study investigates the potential for recycling fishing rope waste from the Magdalen Islands, Canada, into sustainable wall cladding panels, addressing both environmental concerns and waste management challenges. A comprehensive characterization of the fishing ropes was conducted using various analytical techniques to assess their suitability for recycling. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) identified polyethylene (PE) and isotactic polypropylene (iPP) as the main polymers present in the ropes, with a composition of approximately 25% PE and 75% PP. The effects of photodegradation were evaluated through carbonyl index analysis, differential scanning calorimetry (DSC), tensile testing, and gel permeation chromatography (GPC). The results showed reduced crystallinity, a 20% decrease in tensile strength, and lower molecular weights due to environmental exposure in comparison with unused ropes. However, melt flow rate (MFR) measurements aligned with virgin HDPE and PP values used in rope manufacturing, indicating suitable processability for recycling. Panels produced from recycled fishing ropes exhibited lower flexural and impact properties compared to commercial alternatives due to the presence of mineral contaminants and voids in the panels as revealed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). This comprehensive investigation provides valuable insights into the potential repurposing of fishing rope waste, contributing to the development of sustainable waste management strategies for coastal communities.

22 January 2025 in Textiles
Verified
Journal Article
Open access
PDF file
DLDeborah Lupescu
Deborah Lupescu
MRMathieu Robert
Mathieu Robert
SSSimon Sanchez-Diaz
Simon Sanchez-Diaz
Said ElkounSaid Elkoun
Said Elkoun
Milkweed (MW) fiber is a natural fiber that provides tremendous thermal insulation properties due to its lightweight hollow structure. This study aimed to investigate the effect of milkweed fiber as a thermal fiber in nonwovens. Milkweed fibers were blended with a low-melt fiber consisting of a polyethylene terephthalate core, a polyolefin sheath (LM 2.2), and polylactic acid (PLA) fiber. Nonwovens with different fiber contents were manufactured using an air-laid Spike process to determine their effect on thermal and mechanical properties. Then, the nonwovens were compared with Thinsulate® and Primaloft®, two commercially synthetic insulation products. Structural properties, including mass per unit area, thickness, and porosity and thermal properties were studied. Furthermore, compression and short-term compression recovery were also evaluated. The results revealed that milkweed-based nonwovens that contained 50 wt% or 70 wt% of milkweed presented a lower thermal conductivity than synthetic nonwovens. Milkweed nonwovens of the same thickness provided identical thermal resistance as Thinsulate® and Primaloft. Sample 3, composed of 50 wt% MW, 20 wt% LM 2.2, and 30 wt% PLA, demonstrated the same thermal insulation as Thinsulate® with a weight three times lighter. Milkweed nonwovens presented higher moisture regain values than Thinsulate® and Primaloft®, without affecting thermal conductivity.

2 January 2024 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
SSSimon Sanchez-Diaz
Simon Sanchez-Diaz
Said ElkounSaid Elkoun
Said Elkoun
MRMathieu Robert
Mathieu Robert
This study investigated the influence of fiber content, temperature, and relative humidity on the thermal insulation properties of nonwoven mats made of seed fibers from Asclepias Syriaca, commonly known as milkweed floss. Nonwoven mats with a 1-inch thickness were produced by uniformly arranging milkweed fibers within a mold. Various quantities of fiber were employed to obtain nonwoven mats with a fiber content ranging from 5 to 35 kg/m3. Thermal conductivity and thermal diffusivity were measured across diverse relative humidity levels and temperatures. Simultaneously, milkweed floss samples were exposed to identical environmental conditions to assess the moisture regain and specific heat capacities of the fiber. The specific heat capacity of milkweed and thermal conductivity of the nonwovens exhibited a linear increase with temperature. The thermal diffusivity and thermal conductivity of the nonwovens decreased with rising fiber content. The thermal insulation properties of the nonwovens remained partially stable below 30% relative humidity but substantially deteriorated at higher levels. The nonwovens exhibited optimal thermal insulation properties at a fiber content between 20 and 25 kg/m3. The results of this study highlighted several technical advantages of employing milkweed floss as a sustainable and lightweight solution for thermal insulation.