The effect of temperature and storage time at a constant temperature on the stability of poly-(o-aminophenylene)naphthoylenimide solutions in N-methylpyrrolidone has been analyzed using rotational rheometry. A temperature–time window beyond which an irreversible change in the viscoelastic properties of solutions due to cumulative reactions of continuous polymerization and possible intramolecular cyclization has been detected. The influence of polymer concentration and its molecular weight on the rheological properties of solutions determining the choice of methods for their processing into fibers and films has been investigated. The effect of non-solvents (water and ethanol) additives on the rheological properties of solutions and the kinetics of their coagulation has been studied. Dosed addition of non-solvent into the solution promotes a significant increase in the viscoelasticity up to gelation and phase separation. Non-solvent presence in the polymer solutions reduces the activity of the solvent, accelerates the movement of the diffusion front at coagulation, and minimizes the number of macro defects. The combination of parameters under investigation renders it possible for the first time to develop new principles modifying dopes for wet spinning into aqueous or ethanol coagulation bath and finally to obtain a heat- and fire-resistant polynaphthoylenebenzimidazole fibers.

Catalytic systems containing TiCl₄ or TiCl₃, THF, organomagnesium (n-Bu₂Mg) and organoaluminum compounds capable of producing ultrahigh molecular weight polyethylene (UHMWPE) were developed. The resulting polymers were characterized by a molecular weight in the range of (1.8–7.8) × 10⁶ Da and desirable morphology, suitable for modern methods of polymer processing—the solvent-free solid-state processing of superhigh-strength (tensile strength up to 2.1 GPa) and high-modulus (elastic modulus up to 125 GPa) oriented films and film tapes. The impacts of a THF additive, the oxidation state of the titanium atom, and the composition and nature of the nontransition organometallic compounds on the formation of catalytic systems for UHMWPE production were evaluated. The results indicate the suitability of individual titanium chloride tetrahydrofuran complex application for the formation of THF-containing catalytic systems. This approach also results in a significant increase in the system catalytic activity and mechanical properties of UHMWPE. The catalysts based on Ti(III) were inferior to systems containing Ti(IV) in productivity but were markedly superior in the mechanical properties of UHMWPE.

The structure and properties of nanocomposites based on organosoluble polyimide (PI) and branched functional metallosiloxane oligomers with different types of central metal atoms (Al, Cr, Fe, Zr, Hf and Nb) were investigated. Under the same weight content of the filler, the geometric parameters of the nanoparticles and thermal properties of the nanocomposites did not exhibit a direct relationship with the ability of the materials to withstand the incident flow of oxygen plasma. The atomic oxygenerosion resistance of the filled PI films was influenced by the composition of the hybrid fillerand the type of metal atom in the hybrid filler in the base metallosiloxane oligomer. To determine the effectiveness of the nanoparticles as protective elements of the polymer surface, the nanocomposite erosion yields pertaining to the concentration of the crosslinked organo–inorganic polymer forming the dispersed phase were determined and expressed in mmol per gram PI. The filler concentration in the polymer, expressed in these units, allows for comparison of the efficiency of different nanosize fillers for use in fabricating space survivable coatings. This can be important in the pursuit of new precursors, fillers for fabricating space survivable polymer composites.

Data from recent studies of polymer composites with nanosized silica particles are considered. A comparative analysis of current approaches to the description of concentration changes in the glass-transition temperatures of these systems is performed. The morphology of the surface layer in materials with nanoparticles and its effect on the characteristics of materials are discussed. The surface layer of a composite is represented as a shell including both the polymer and the external part of the filler. A conditional division between the functions of the external layer and the nanoparticle core makes it possible to determine in a first approximation which characteristics of the matrix and the filler have an effect on the properties of nanocomposites.