Jishnu Chandran R

Dr. Jishnu Chandran R

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2019 in Fluid Phase Equilibria
Verified
Journal Article
Closed access
JRJishnu Chandran R
Jishnu Chandran R
ASA. Salih
A. Salih

13 August 2024 in Energies
Verified
Journal Article
Open access
PDF file
STSaravana Kumar Tamilarasan
Saravana Kumar Tamilarasan
Jobel JoseJobel Jose
Jobel Jose
Vignesh BoopalanVignesh Boopalan
Vignesh Boopalan
FCFei Chen
Fei Chen
Senthil Kumar AnantharajanSenthil Kumar Anantharajan
Senthil Kumar Anantharajan
Jan TalerJan Taler
Jan Taler
Global warming and environmental pollution from greenhouse gas emissions are hitting an all-time high consistently year after year. In 2022, energy-related emissions accounted for 87% of the overall global emissions. The fossil fuel-based conventional power systems also need timely upgrades to improve their cycle efficiency and reduce their impact on the environment. Supercritical CO2 systems and cycles are gaining attention because of their higher efficiencies and their compatibility with varied energy sources. The present work is a detailed overview of the recent developments in supercritical CO2-based power generation technologies. The supercritical CO2-based Brayton and Rankine power cycles and their improvisations in industrial applications are also discussed in detail. The advances in heat exchanger technology for supercritical CO2 systems are another focus of the study. The energy, exergy, and economical (3E) analysis is carried out on various supercritical CO2 power cycles reported in the literature and the data are concisely and intuitively presented. The review concludes by listing the identified directions for future technology development and areas of immediate research interest. A roadmap is proposed for easing the commercialization of supercritical CO2 technologies to immediately address the growing challenges and concerns arising from energy-related emissions.

1 December 2024 in Physics of Fluids
Verified
Journal Article
Closed access
JRJishnu Chandran R
Jishnu Chandran R
SSSreeja Sadasivan
Sreeja Sadasivan
Senthil Kumar AnantharajanSenthil Kumar Anantharajan
Senthil Kumar Anantharajan
FCFei Chen
Fei Chen
Transcritical refrigeration systems using natural refrigerants like CO2 operate on the ejector–expansion cycle to achieve high operating efficiency. The variability of ejector geometry dictates the adjustability of refrigerating capacity in such systems. Traditional spindle-controlled axial-flow ejectors significantly obstruct the high-pressure motive flow to regulate mass flow rate by controlling flow area. This study introduces the first radial-flow ejector geometry for transcritical CO2 refrigeration systems, designed to operate at high mass flow rates and entrainment ratios with minimal obstruction to motive flow. The study numerically investigates the performance of a radial-flow two-phase ejector for CO2, comparing it with an axial-flow ejector of similar dimensions under the same conditions. It explores the impact of applied compression ratio, motive nozzle throat spacing, and other geometries on radial ejector performance. An increase in the motive throat spacing improves the range of operable discharge pressures and achievable compression ratios, with a slight reduction in the secondary flow entrainment. A nozzle throat spacing of 0.6 mm allows a wider range of operable discharge pressures, and beyond this, the operable discharge pressure range drops. The addition of a diffuser section of sufficient length also improves the flow entrainment in the radial ejector. The radial ejector allows substantially high mass flow rates of even 15 times that of the axial ejector. This high mass flow capacity in the radial configuration can significantly compact ejector designs for large-capacity transcritical CO2 refrigeration and air-conditioning systems.

10 September 2020 in Reaction Chemistry & Engineering
Verified
Journal Article
Closed access
PDF file
RRRisha Raju
Risha Raju
JRJishnu Chandran R
Jishnu Chandran R
ASA. Salih
A. Salih
KJKuruvilla Joseph
Kuruvilla Joseph
The ammonia used for NOx reduction in urea SCR is formed from the decomposition of urea in the mixing chamber. The main challenges in urea SCR are the incomplete decomposition of urea to NH3 and its subsequent non-uniform distribution at the SCR inlet. A uniform profile at the SCR inlet without accounting for the non-uniformities from the mixing chamber may lead to an error in the system design. For symmetrical injection of urea inside the mixing chamber, the insufficient exhaust gas temperature and lower residence time of urea are two important factors that lead to the incomplete conversion of urea and the non-uniform distribution of ammonia at the SCR inlet. A CFD analysis of the mixing chamber with a symmetrical injection of urea is carried out to study these factors. The analysis showed that by simultaneously lowering the flow rate of urea and reducing the velocity of the exhaust gas, which is at a sufficiently high temperature, the NH3 generation is improved considerably. The CFD analysis was further extended to model the SCR with different inlet conditions. This analysis revealed that for SCR with non-uniform inlet conditions arising from the mixing chamber, the NOx reduction achieved is lower compared to that in the case of a uniform inlet profile for the SCR. The analysis shows that the radial variation in NOx reduction arising from the non-uniformities in the mixing chamber diminishes with a rise in the exhaust gas temperature. As compared to that with uniform inlet profiles, the NOx conversion in SCR with non-uniform inlet profiles exhibit a sharp rise with an increase in NO2 concentration.

30 November 2023 in The Journal of Supercritical Fluids
Verified
Journal Article
Closed access
JRJishnu Chandran R
Jishnu Chandran R
SASenthil Kumar Arumugam
Senthil Kumar Arumugam
SSSreeja Sadasivan
Sreeja Sadasivan
BJBibin John
Bibin John
PKP. Rajesh Kanna
P. Rajesh Kanna

29 April 2024 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Closed access
PDF file
JRJishnu Chandran R
Jishnu Chandran R
Senthil Kumar AnantharajanSenthil Kumar Anantharajan
Senthil Kumar Anantharajan
SSSreeja Sadasivan
Sreeja Sadasivan
Rajesh KannaRajesh Kanna
Rajesh Kanna
FCFei Chen
Fei Chen