Graphene oxide (GO) nanosheets, as one of the most studied graphene derivatives, have demonstrated an intrinsically strong physisorption-based gas–matter behavior, owing to its enhanced volume–surface ratio and abundant surface functional groups. The exploration of efficient and cost-effective synthesis methods for GO is an ongoing task. In this work, we explored a novel approach to upcycle inexpensive polyethylene terephthalate (PET) plastic waste into high-quality GO using a combination of chemical and thermal treatments based on a montmorillonite template. The obtained material had a nanosheet morphology with a lateral dimension of around ~2 µm and a thickness of ~3 nm. In addition, the GO nanosheets were found to be a p-type semiconductor with a bandgap of 2.41 eV and was subsequently realized as a gas sensor. As a result, the GO sensor exhibited a fully reversible sensing response towards ultra-low-concentration NO2 gas with a limit of detection of ~1.43 ppb, without the implementation of an external excitation stimulus including elevating the operating temperature or bias voltages. When given a thorough test, the sensor maintained an impressive long-term stability and repeatability with little performance degradation after 5 days of experiments. The response factor was estimated to be ~11% when exposed to 1026 ppb NO2, which is at least one order of magnitude higher than that of other commonly seen gas species including CH4, H2, and CO2.
The emerging 2D nanomaterials with unique optical properties are promising for next‐generation miniatured on‐chip devices. One of the prerequisites is to precisely measure their optical parameters during their implementation. However, the inherent features of 2D layers, including limited lateral dimensions and ultra‐small thicknesses, are not favorable to the conventional characterization techniques applied in the bulk system, especially for optical complex refractive indices measurement. Here, this work proposes a silicon photonics‐enabled platform to evaluate the complex refractive indices of ultrathin 2D materials in a facile and reliable manner. Ultrathin molybdenum oxides (MoOx) with multiple stoichiometric states are selected as the target 2D material to provide sufficient complexity of the system for investigation. Upon the integration of ultrathin MoOx, the silicon photonic chip, in the form of a Mach‐Zehnder interferometer, exhibits wavelength shifts which are used for calculating the optical complex refractive indices. Compared with the theoretical calculation, the deviation is as low as 1% and generally less than 5%. This work demonstrates a highly accurate and reliable approach for measuring the complex refractive index of 2D films, possibly assisting future advances in 2D materials‐enabled optical and photonic applications.