8 June 2022 in Materials Horizons
Metal oxides modified with dopants and defects are an emerging class of novel materials supporting the localized surface plasmon resonance across a wide range of optical wavelengths, which have attracted tremendous research interest particularly in biological applications in the past decade. Compared to conventional noble metal-based plasmonic materials, plasmonic metal oxides are particularly favored for their cost efficiency, flexible plasmonic properties, and improved biocompatibility, which can be important to accelerate their practical implementation. In this review, we first explicate the origin of plasmonics in dopant/defect-enabled metal oxides and their associated tunable localized surface plasmon resonance through the conventional Mie–Gans model. The research progress of dopant incorporation and defect generation in metal oxide hosts, including both in situ and ex situ approaches, is critically discussed. The implementation of plasmonic metal oxides in biological applications in terms of therapy, imaging, and sensing is summarized, in which the uniqueness of dopant/defect-driven plasmonics for inducing novel functionalities is particularly emphasized. This review may provide insightful guidance for developing next-generation plasmonic devices for human health monitoring, diagnosis and therapy.
11 August 2023 in Advanced Electronic Materials
Solution‐processed microelectronics offer advantages, including cost‐effectiveness, higher energy efficiency, and compatibility with rapid prototyping compared to their counterparts fabricated through traditional semiconductor manufacturing processes. Unfortunately, solution‐processed transistors exhibit wide performance variability and low yield. In this work, a solution‐processed transparent indium gallium zinc oxide (IGZO) thin film transistor with a low temperature‐annealed hafnium oxide dielectric layer is described. Post‐annealing temperatures for the sol–gel hafnium dioxide thin film are reduced to below 200 °C, significantly expanding the range of substrates on which the metal oxide dielectric can be deposited. The fabricated devices exhibit excellent characteristics with high field‐effect mobilities of over 85 cm2 V−1 s−1, along with low subthreshold swing below 140 mV dec−1, high on/off ratios, and near‐zero threshold voltages when operating stably at low‐operating voltages of 2 V. The solution processed transparent hafnium dioxide gate dielectric IGZO transistors are shown to exhibit comparatively significantly lower device variation and high yield, allowing for the reproducible fabrication of large‐area and transparent solution processed microelectronics systems.
30 September 2022 in Journal of Materials Chemistry C
2D Ag 2 SO 4 nanosheets have been delaminated from bulk Ag 2 S using a two-step combined exfoliation method. Upon blue light irradiation, the 2D Ag 2 SO 4 -based sensor exhibits high-performance responses toward low-concentrated NO 2 gas at room temperature.
7 July 2025 in Advanced Electronic Materials
A critical requirement for low‐power microelectronics is the construction of logic circuits using complementary devices. In pursuit of low‐power solution‐processed thin film Complementary Metal Oxide Semiconductor (CMOS) circuits, significant research is expended toward producing the elusive p‐type transistors. Beyond the challenges associated with processability and formulation complexity of existing metal halide solutions, they critically do not attain the electrical properties required to build productive devices. For the first time, this work describes high‐performance solution‐processed p‐type thin film transistors developed using copper tin halide. Incorporating tin and high electronegativity halide species (Cl‐/F‐) improves CuI film morphology, stability, and electrical properties through copper/tin vacancy suppression, which results in high mobility, over 20 cm2 Vs−1, and low operating voltage Thin Film Transistors (TFTs). Furthermore, the p‐type TFTs are able to be integrated with fully solution‐processed n‐type Indium Gallium Zinc Oxide (IGZO) TFTs in a highly transparent multilayer stack architecture. The monolithic 3D (M3D) CMOS design records inverter gains of 20 at VDD = 3V, demonstrating p‐type devices fabricated using solution processing have the requisite high performance required for productive solution‐processed multilayer microelectronics.
14 May 2023 in Advanced Optical Materials
The emerging 2D nanomaterials with unique optical properties are promising for next‐generation miniatured on‐chip devices. One of the prerequisites is to precisely measure their optical parameters during their implementation. However, the inherent features of 2D layers, including limited lateral dimensions and ultra‐small thicknesses, are not favorable to the conventional characterization techniques applied in the bulk system, especially for optical complex refractive indices measurement. Here, this work proposes a silicon photonics‐enabled platform to evaluate the complex refractive indices of ultrathin 2D materials in a facile and reliable manner. Ultrathin molybdenum oxides (MoOx) with multiple stoichiometric states are selected as the target 2D material to provide sufficient complexity of the system for investigation. Upon the integration of ultrathin MoOx, the silicon photonic chip, in the form of a Mach‐Zehnder interferometer, exhibits wavelength shifts which are used for calculating the optical complex refractive indices. Compared with the theoretical calculation, the deviation is as low as 1% and generally less than 5%. This work demonstrates a highly accurate and reliable approach for measuring the complex refractive index of 2D films, possibly assisting future advances in 2D materials‐enabled optical and photonic applications.
14 January 2022 in Advanced Functional Materials
Quantum Dots In article number 2106387, Yang Yu, Efstratios Skafidas, and co-workers present transparent and fully solution processed inorganic quantum dots LED (QLED). To improve upon the structures...