Organic vegetable production is particularly affected by weed pressure and mechanical weeding is the major tactic implemented by growers to keep weeds under economic thresholds. Living mulch (LM) has been shown to provide several environmental services; however, LM management is required to avoid competition between service crops and cash crops. The aim of this trial was to evaluate two innovative LM-based management systems: a system that provided LM growth regulation by means of flaming (LM-FL) and a system where the LM was regularly mowed by an autonomous mower (LM-AM), both compared with a control without LM and based on standard tillage operations (TILL). The three management systems were evaluated in terms of crop production, weed control, and energy consumption on a 2 yr organic crop rotation of cauliflower (Brassica oleracea L. var botrytis) and eggplant (Solanum melongena L.). LM-AM produced an acceptable fresh marketable yield for both vegetable crops. Moreover, the weed dry biomass obtained in LM-AM-managed plots was lower compared to the LM-FL plots and ranged approximately from 200 to 300 kg ha⁻¹. Furthermore, LM-AM management resulted in lower energy consumption (−2330 kWh ha⁻¹ with respect to the TILL system and −7225 kWh ha⁻¹ with respect to the LM-FL system). The results of this trial suggest that autonomous mowers have a great potential to improve LM management and help with implementing sustainable organic vegetable systems.

Enhancing vineyards sustainability and reducing herbicides usage is a crucial theme, thus alternative weed management methods are starting to be studied. Cover crops have been shown to provide for several environmental services such as performing an efficient weed control and promoting biodiversity, thus improving the sustainability of the overall management system. However, the use of cover crops is usually confined to the interrow area in order to avoid competition with vines. Under-trellis weed management in vineyards is an important challenge, conventionally fulfilled by cultivation or repeated herbicides applications. Autonomous mowers are small autonomous machines that have shown a great efficiency when employed in agricultural contexts. Due to their reduced size, they can easily prevent the excessive vertical growth of weeds both in the interrows and under trellis without the use of chemical applications. The aim of this trial was to evaluate if the combination of cover crop species and autonomous mowers management could improve vineyard sustainability. Vineyard floor cover that was managed with an autonomous mower had a shorter canopy height and a lower weed dry biomass compared to the conventionally managed vineyard floor cover. Vineyard floor management providing cover crops and autonomous mowing had a significantly lower weed cover percentage compared to conventional floor management, especially under-trellis. The results of this trial suggest that the combination of cover crops and autonomous mowers may be a sustainable and reliable technique to include in vineyards floor management.

Autonomous mowers are becoming increasingly common in public and private greenspaces. Autonomous mowers can provide several advantages since these machines help to save time and energy and prevent operators from possible injuries. Current autonomous mowers operate by following random trajectories within areas defined by a shallow-buried boundary wire that has the purpose to generate an electro-magnetic field. Once the electro-magnetic field is perceived by the autonomous mower, the machine will stop and change direction. Mowing along random trajectories is considered an efficient solution to manage areas with a variable number of obstacles. In agriculture, autonomous technologies are becoming increasingly popular since they can help to increase both the quantity and quality of agricultural products by reducing productive cost and improving the production process. Thus, even autonomous mowers may be useful to carry out some of the agricultural operations that are highly time consuming. In fact, some autonomous mowers designed and realized to work in vineyards and home vegetable gardens are already available on the market. The aim of this study was to compare the work capacity of six autonomous mowers that move along random trajectories in areas with a high number of obstacles to assess if these machines may be employed in some agricultural contexts. The six autonomous mowers were split in three groups based on their size (large, medium, and small) and were left to work in two areas with equal number of obstacles but different layouts. The first area (Site A) had a square shape and an extension of 23.04 m², in order to keep the autonomous mowers enclosed inside it. The second area (Site B) had a square shape and an extension of 84.64 m², in order to have a part of the area with no obstacles. The layout and the size of the two areas affected the autonomous mowers performances in different ways. The six autonomous mowers working on Site A obtained similar results and higher performances compared to the same mowers working on Site B. All the autonomous mowers proved to be able to mow more than 89% of Site A after 2 h and more than 98% of Site A after 5 h. On Site B small size autonomous mowers obtained the best results mowing more than 83% of the area with obstacles after 2 h and more than 98% of the area with obstacles after 5 h. However, specific work settings allowed larger autonomous mowers to improve their efficiency, obtaining similar results compared to smaller autonomous mowers.

Preserving soil quality and increasing soil water availability is an important challenge to ensure food production for a growing global population. As demonstrated by several studies, conservative crop management, combined with soil cover and crop diversification, can significantly reduce soil and water losses. The aim of this review is to evaluate the spread of smart solutions to perform conservation agriculture (CA) well in the Mediterranean Basin, taking into account the evolution of the strategies and the machines used to perform conservative tillage systems in different contexts in the last 30 years, as well as the effects induced by their adoption on the productivity of herbaceous and horticultural crops, weed control and economic feasibility, in comparison with those obtained utilizing conventional techniques based on soil inversion.

Before the introduction of positioning technologies in agriculture practices such as global navigation satellite systems (GNSS), data collection and management were time-consuming and labor-intensive tasks. Today, due to the introduction of advanced technologies, precise information on the performance of agricultural machines, and smaller autonomous vehicles such as robot mowers, can be collected in a relatively short time. The aim of this work was to track the performance of a robot mower in various turfgrass areas of an equal number of square meters but with four different shapes by using real-time kinematic (RTK)-GNSS devices, and to easily extract data by a custom built software capable of calculating the distance travelled by the robot mower, the forward speed, the cutting area, and the number of intersections of the trajectories. These data were then analyzed in order to provide useful functioning information for manufacturers, entrepreneurs, and practitioners. The path planning of the robot mower was random and the turfgrass area for each of the four shapes was 135 m² without obstacles. The distance travelled by the robot mower, the mean forward speed, and the intersections of the trajectories were affected by the interaction between the time of cutting and the shape of the turfgrass. For all the different shapes, the whole turfgrass area was completely cut after two hours of mowing. The cutting efficiency decreased by increasing the time, as a consequence of the increase in overlaps. After 75 minutes of cutting, the efficiency was about 35% in all the turfgrass areas shapes, thus indicating a high level of overlapping.

Tall fescue (Schedonorus arundinaceus (Schreb.) Dumort.) is often managed with a cutting height ranging from 70 to 100 mm in ornamental lawns. Some autonomous mowers have been specifically designed to maintain mowing height in the same range. Generally, autonomous mowers operate by following random trajectories, and substantial overlapping is needed to obtain full coverage of the working area. In the case of tall grass, this may cause lodging of grass plants, which in turn may reduce turf quality. The introduction of a navigation system based on systematic trajectories has the potential to improve the performances of autonomous mowers with respect to machine efficiency and turf quality. With the aim of determining the effects of reduced mowing frequency and systematic navigation systems on turf quality and mower performances in terms of working time, energy consumption and overlapping, the performances of two autonomous mowers working with random and systematic trajectories were tested on a mature tall fescue lawn at 90 mm cutting height. The working efficiency was approximately 80% for the systematic trajectories and approximately 35% for the random trajectories; this was mainly due to the lower overlapping associated with systematic trajectories. Turf quality was slightly higher for the mower working systematically (a score of 8 using a 1–9 score with 1 = poor, 6 = acceptable and 9 = best) compared to the one working randomly (quality of 7 and 6 on a 1–9 scale with 1 = poor and 9 = best). No appreciable lodging was observed in either case. For tall, managed lawns, systematic trajectories may improve autonomous mowers’ overall performances.