The existence of more than thirty stress–strain equations, including those proposed by the government regulations in many countries, seems to indicate that additional, unifying, and at the same time generalizing research is necessary for this subject. Many expressions can be found to set or determine the initial modulus of elasticity of concrete, i.e., the modulus of elasticity of concrete when no load has been applied to it. This work proposes a complete generalization of the equations based on scalar damage models, applicable to all types of concrete tested under uniaxial compression with any constant rate of stress or strain, although in no case can it be considered a constitutive model. We prefer to discuss an equation that models the shape of the stress–strain curve. Thus, the shape of this curve is studied here in the same way a forensic scientist would, which is why we could see this work as an autopsy carried out on the test specimen through the trace left in the plane σ-ε by the straining process up until its inevitable outcome. That is to say, we believe in a purely phenomenological approach. The results are compared with the data obtained experimentally by analyzing test specimens made using various mixed portions of cement, water, and aggregates.
The construction sector is presently among the most resource-intensive industries, driving a substantial body of research dedicated to the development of more sustainable materials to address these demands. A particularly promising approach within the framework of the circular economy is the repurposing of waste as a principal raw material for the creation of new construction products. Within this context, the primary aim of this study is to engineer ceramic materials for brick production using 100% waste-derived inputs, specifically aggregate washing sludge and manganese mining by-products. To evaluate the potential of these sustainable ceramic materials, an extensive investigation was conducted, encompassing both physical and mechanical testing, as well as a thorough characterisation of the waste inputs. For this purpose, a series of ceramic specimens were fabricated with varying proportions of mining residues and aggregate washing sludge, adhering to the conventional protocols employed in the manufacture of ceramic bricks. The results demonstrate that these sustainable ceramics exhibit a linear shrinkage reduction of up to 5% compared to traditional clay-based ceramics. Furthermore, they show water absorption levels—whether via capillarity, cold water, or hot water absorption—that are up to twice those observed in conventional clay ceramics, while maintaining comparable density values. This increased absorption, however, correlates with a reduction in mechanical strength at higher concentrations of manganese waste, yet the material continues to meet the minimum strength requirements as specified by industry standards for such products. In conclusion, this research introduces a novel, sustainable ceramic material that not only reduces economic and environmental costs but also adheres to the required performance criteria for construction applications.
Acid mine drainage (AMD) generation in sulfide waste rock deposits involves complex hydrogeochemical processes that require controlled experimental approaches to improve our understanding of them. In this study, a laboratory-scale waste rock dam reactor was operated for 31 weeks using representative materials from the Iberian Pyrite Belt. Continuous monitoring of physicochemical parameters and weekly chemical analyses generated a big dataset that was evaluated using graphical and statistical approaches. The reactor successfully reproduced the principal hydrogeochemical processes characteristic of AMD environments, including sulfide oxidation, contaminant transport and attenuation. Graphical and statistical analyses consistently validated the proposed conceptual hydrogeochemical model. Sulfate concentrations were identified as the main control on electrical conductivity, while alternating wet and dry periods governed pH fluctuations through precipitation–dissolution and redissolution processes. The progressive decrease in dissolved metals and sulfate along the reactor reflected precipitation processes comparable to those observed in natural AMD systems. The reactor reproduced, at a small scale, both the temporal evolution and the three hydrological phases described for natural waste rock dams, demonstrating its reliability as a reproducible experimental platform for hydrogeochemical modeling and the investigation of AMD generation under controlled conditions. An effective diagnosis of contamination processes in mine waters is essential for future remediation interventions.