In the context of soil pollution, plants suffer stress when exposed to extreme concentrations of potentially toxic elements (PTEs). The alterations to the plants caused by such stressors can be monitored by multispectral imagery in the form of vegetation indices, which can inform pollution management strategies. Here we combined geochemistry and remote sensing techniques to offer a preliminary soil pollution assessment of a vast abandoned spoil heap in the surroundings of La Soterraña mining site (Asturias, Spain). To study the soil distribution of the PTEs over time, twenty-seven soil samples were randomly collected downstream of and around the main spoil heap. Furthermore, the area was covered by an unmanned aerial vehicle (UAV) carrying a high-resolution multispectral camera with four bands (red, green, red-edge and near infrared). Multielement analysis revealed mercury and arsenic as principal pollutants. Two indices (from a database containing up to 55 indices) offered a proper correlation with the concentration of PTEs. These were: CARI2, presenting a Pearson Coefficient (PC) of 0.89 for concentrations >200 mg/kg of As; and NDVIg, PC of −0.67 for >40 mg/kg of Hg. The combined approach helps prediction of those areas susceptible to greatest pollution, thus reducing the costs of geochemical campaigns.
The ceramics industry dedicated to the manufacture of building materials is a very significant cause of environmental pollution, and various research projects are being carried out to reduce the associated environmental impact. One of the most important research lines is the generation and development of new materials, from waste, through more sustainable production processes. All of this is framed in circular mining. In this research study, geopolymers were developed with biomass bottom ashes and brick dust in order to replace the traditional ceramics used to construct bricks. For this, different families of test tubes were formed with different percentages of both residues, and their physical and mechanical properties were studied. In this way, the properties of geopolymers could be compared with traditional ceramics. In addition, in order to determine the cause–effect relationships between physical properties and compressive strength, data were processed using fuzzy logic and data mining techniques. The results showed the feasibility of geopolymers generation with biomass bottom ashes and brick dust with acceptable properties to replace conventional ceramics. In addition, the fuzzy logic analysis allowed for establishing clear and objective relationships between the physical properties and the compressive strength of the geopolymers, with the aim of developing the highest quality geopolymer.
The production of building materials is unavoidable if the well-being and development of society are to be maintained. However, in manufacturing these materials, significant greenhouse gas emissions and environmental effects are produced. For this reason, and with the aim of reducing the impact of the manufacture of these materials, this work developed a geopolymeric material made up solely of wastes, brick dust and biomass bottom ashes which replaced the traditional ceramic materials. To evaluate the quality of this sustainable geopolymeric material, different groups of specimens were formed with different percentages of both residues, subsequently determining the physical properties of the new-formed geopolymers and guaranteeing they accomplish the prescriptions of the ceramic regulations for construction. In addition, the results of the geopolymer characterisation tests were statistically analysed using factor analysis, with the sole purpose of establishing connections and interdependence between the variables that influence the geopolymerisation process. Thus, it was possible to demonstrate that the combination of brick dust and biomass bottom ashes produced geopolymers with adequate qualities to replace traditional ceramics, as well as that the different combinations of both residues produced feasible materials to be used as ceramics with various characteristics, with two main factors determined by factorial analysis that governed the physical properties of the geopolymer obtained: the percentage of brick dust and the theoretical porosity.
The construction sector is presently among the most resource-intensive industries, driving a substantial body of research dedicated to the development of more sustainable materials to address these demands. A particularly promising approach within the framework of the circular economy is the repurposing of waste as a principal raw material for the creation of new construction products. Within this context, the primary aim of this study is to engineer ceramic materials for brick production using 100% waste-derived inputs, specifically aggregate washing sludge and manganese mining by-products. To evaluate the potential of these sustainable ceramic materials, an extensive investigation was conducted, encompassing both physical and mechanical testing, as well as a thorough characterisation of the waste inputs. For this purpose, a series of ceramic specimens were fabricated with varying proportions of mining residues and aggregate washing sludge, adhering to the conventional protocols employed in the manufacture of ceramic bricks. The results demonstrate that these sustainable ceramics exhibit a linear shrinkage reduction of up to 5% compared to traditional clay-based ceramics. Furthermore, they show water absorption levels—whether via capillarity, cold water, or hot water absorption—that are up to twice those observed in conventional clay ceramics, while maintaining comparable density values. This increased absorption, however, correlates with a reduction in mechanical strength at higher concentrations of manganese waste, yet the material continues to meet the minimum strength requirements as specified by industry standards for such products. In conclusion, this research introduces a novel, sustainable ceramic material that not only reduces economic and environmental costs but also adheres to the required performance criteria for construction applications.
4 December 2018 in Arabian Journal for Science and Engineering
UNESCO defines heritage is the legacy we inherit from the past, which we live with today, and which we will pass on to future generations. Our cultural and natural heritage is an irreplaceable source of life and inspiration. The province of Huelva, in Andalusia, Spain, has a rich mining history that has left a significant legacy in its landscape and culture. Industrial Heritage encompasses both movable and immovable assets created throughout history by human extraction and production activities. The assets are integrated into a specific environment that must also be protected, as industry arises from society's use of the natural environment. Among the most outstanding elements of this industrial heritage are mining Dams, fundamental structures for water management and environmental preservation in extraction areas. This work documents the history, construction methodology and state of conservation of the main mining Dams in Huelva, assesses their heritage value, analyses their environmental impact and explores their educational and tourism potential. It also identifies the challenges and proposes conservation strategies to ensure the preservation of these unique constructions.