Mapping lithology and geological structures accurately remains a challenge in difficult terrain or in active mining areas. We demonstrate that the integration of terrestrial and drone-borne multi-sensor remote sensing techniques significantly improves the reliability, safety, and efficiency of geological activities during exploration and mining monitoring. We describe an integrated workflow to produce a geometrically and spectrally accurate combination of a Structure-from-Motion Multi-View Stereo point cloud and hyperspectral data cubes in the visible to near-infrared (VNIR) and short-wave infrared (SWIR), as well as long-wave infrared (LWIR) ranges acquired by terrestrial and drone-borne imaging sensors. Vertical outcrops in a quarry in the Freiberg mining district, Saxony (Germany), featuring sulfide-rich hydrothermal zones in a granitoid host, are used to showcase the versatility of our approach. The image data are processed using spectroscopic and machine learning algorithms to generate meaningful 2.5D (i.e., surface) maps that are available to geologists on the ground just shortly after data acquisition. We validate the remote sensing data with thin section analysis and laboratory X-ray diffraction, as well as point spectroscopic data. The combination of ground- and drone-based photogrammetric and hyperspectral VNIR, SWIR, and LWIR imaging allows for safer and more efficient ground surveys, as well as a better, statistically sound sampling strategy for further structural, geochemical, and petrological investigations.

This contribution explores the potential of unmanned aerial systems (UAS) to monitor areas affected by acid mine drainage (AMD). AMD is an environmental phenomenon that usually develops in the vicinity of mining operations or in post-mining landscapes. The investigated area covers a re-cultivated tailing in the Sokolov lignite district of the Czech Republic. A high abundance of AMD minerals occurs in a confined space of the selected test site and illustrates potential environmental issues. The mine waste material contains pyrite and its consecutive weathering products, mainly iron hydroxides and oxides. These affect the natural pH values of the Earth’s surface. Prior research done in this area relies on satellite and airborne data, and our approach focuses on lightweight drone systems that enables rapid deployment for field campaigns and consequently-repeated surveys. High spatial image resolutions and precise target determination are additional advantages. Four field and flight campaigns were conducted from April to September 2016. For validation, the waste heap was probed in situ for pH, X-ray fluorescence (XRF), and reflectance spectrometry. Ground truth was achieved by collecting samples that were characterized for pH, X-ray diffraction, and XRF in laboratory conditions. Hyperspectral data were processed and corrected for atmospheric, topographic, and illumination effects using accurate digital elevation models (DEMs). High-resolution point clouds and DEMs were built from drone-borne RGB data using structure-from-motion multi-view-stereo photogrammetry. The supervised classification of hyperspectral image (HSI) data suggests the presence of jarosite and goethite minerals associated with the acidic environmental conditions (pH range 2.3–2.8 in situ). We identified specific iron absorption bands in the UAS-HSI data. These features were confirmed by ground-truth spectroscopy. The distribution of in situ pH data validates the UAS-based mineral classification results. Evaluation of the applied methods demonstrates that drone surveying is a fast, non-invasive, inexpensive technique for multi-temporal environmental monitoring of post-mining landscapes.

Uncrewed aerial vehicles (UAVs), also known as drones, are ubiquitous and their use cases extend today from governmental applications to civil applications such as the agricultural, medical, and transport sectors, etc. In accordance with the requirements in terms of demand, it is possible to carry out various missions involving several types of UAVs as well as various onboard sensors. According to the complexity of the mission, some configurations are required both in terms of hardware and software. This task becomes even more complex when the system is composed of autonomous UAVs that collaborate with each other without the assistance of an operator. Several factors must be considered, such as the complexity of the mission, the types of UAVs, the communication architecture, the routing protocol, the coordination of tasks, and many other factors related to the environment. Unfortunately, although there are many research works that address the use cases of multi-UAV systems, there is a gap in the literature regarding the difficulties involved with the implementation of these systems from scratch. This review article seeks to examine and understand the communication issues related to the implementation from scratch of autonomous multi-UAV systems for collaborative decisions. The manuscript will also provide a formal definition of the ecosystem of a multi-UAV system, as well as a comparative study of UAV types and related works that highlight the use cases of multi-UAV systems. In addition to the mathematical modeling of the collaborative target detection problem in distributed environments, this article establishes a comparative study of communication architectures and routing protocols in a UAV network. After reading this review paper, readers will benefit from the multicriteria decision-making roadmaps to choose the right architectures and routing protocols adapted for specific missions. The open challenges and future directions described in this manuscript can be used to understand the current limitations and how to overcome them to effectively exploit autonomous swarms in future trends.

Recently, ground-based hyperspectral imaging has come to the fore, supporting the arduous task of mapping near-vertical, difficult-to-access geological outcrops. The application of outcrop sensing within a range of one to several hundred metres, including geometric corrections and integration with accurate terrestrial laser scanning models, is already developing rapidly. However, there are few studies dealing with ground-based imaging of distant targets (i.e., in the range of several kilometres) such as mountain ridges, cliffs, and pit walls. In particular, the extreme influence of atmospheric effects and topography-induced illumination differences have remained an unmet challenge on the spectral data. These effects cannot be corrected by means of common correction tools for nadir satellite or airborne data. Thus, this article presents an adapted workflow to overcome the challenges of long-range outcrop sensing, including straightforward atmospheric and topographic corrections. Using two datasets with different characteristics, we demonstrate the application of the workflow and highlight the importance of the presented corrections for a reliable geological interpretation. The achieved spectral mapping products are integrated with 3D photogrammetric data to create large-scale now-called “hyperclouds”, i.e., geometrically correct representations of the hyperspectral datacube. The presented workflow opens up a new range of application possibilities of hyperspectral imagery by significantly enlarging the scale of ground-based measurements.

The exposure of metal sulfides to air or water, either produced naturally or due to mining activities, can result in environmentally damaging acid mine drainage (AMD). This needs to be accurately monitored and remediated. In this study, we apply high-resolution unmanned aerial system (UAS)-based hyperspectral mapping tools to provide a useful, fast, and non-invasive method for the monitoring aspect. Specifically, we propose a machine learning framework to integrate visible to near-infrared (VNIR) hyperspectral data with physicochemical field data from water and sediments, together with laboratory analyses to precisely map the extent of acid mine drainage in the Tintillo River (Spain). This river collects the drainage from the western part of the Rio Tinto massive sulfide deposit and discharges large quantities of acidic water with significant amounts of dissolved metals (Fe, Al, Cu, Zn, amongst others) into the Odiel River. At the confluence of these rivers, different geochemical and mineralogical processes occur due to the interaction of very acidic water (pH 2.5–3.0) with neutral water (pH 7.0–8.0). This complexity makes the area an ideal test site for the application of hyperspectral mapping to characterize both rivers and better evaluate contaminated water bodies with remote sensing imagery. Our approach makes use of a supervised random forest (RF) regression for the extended mapping of water properties, using the samples collected in the field as ground-truth and training data. The resulting maps successfully estimate the concentration of dissolved metals and related physicochemical properties in water, and trace associated iron species (e.g., jarosite, goethite) within sediments. These results highlight the capabilities of UAS-based hyperspectral data to monitor water bodies in mining environments, by mapping their hydrogeochemical properties, using few field samples. Hence, we have demonstrated that our workflow allows the rapid discrimination and mapping of AMD contamination in water, providing an essential basis for monitoring and subsequent remediation.

Mapping geological outcrops is a crucial part of mineral exploration, mine planning and ore extraction. With the advent of unmanned aerial systems (UASs) for rapid spatial and spectral mapping, opportunities arise in fields where traditional ground-based approaches are established and trusted, but fail to cover sufficient area or compromise personal safety. Multi-sensor UAS are a technology that change geoscientific research, but they are still not routinely used for geological mapping in exploration and mining due to lack of trust in their added value and missing expertise and guidance in the selection and combination of drones and sensors. To address these limitations and highlight the potential of using UAS in exploration settings, we present an UAS multi-sensor mapping approach based on the integration of drone-borne photography, multi- and hyperspectral imaging and magnetics. Data are processed with conventional methods as well as innovative machine learning algorithms and validated by geological field mapping, yielding a comprehensive and geologically interpretable product. As a case study, we chose the northern extension of the Siilinjärvi apatite mine in Finland, in a brownfield exploration setting with plenty of ground truth data available and a survey area that is partly covered by vegetation. We conducted rapid UAS surveys from which we created a multi-layered data set to investigate properties of the ore-bearing carbonatite-glimmerite body. Our resulting geologic map discriminates between the principal lithologic units and distinguishes ore-bearing from waste rocks. Structural orientations and lithological units are deduced based on high-resolution, hyperspectral image-enhanced point clouds. UAS-based magnetic data allow an insight into their subsurface geometry through modeling based on magnetic interpretation. We validate our results via ground survey including rock specimen sampling, geochemical and mineralogical analysis and spectroscopic point measurements. We are convinced that the presented non-invasive, data-driven mapping approach can complement traditional workflows in mineral exploration as a flexible tool. Mapping products based on UAS data increase efficiency and maximize safety of the resource extraction process, and reduce expenses and incidental wastes.