Zongming Duan

Dr. Zongming Duan


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 June 2018 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
ZDZongming Duan
Zongming Duan
YWYan Wang
Yan Wang
WLWei Lv
Wei Lv
YDYuefei Dai
Yuefei Dai
FLFujiang Lin
Fujiang Lin
A 6-bit high-accuracy active phase shifter is developed in 0.13-μm CMOS technology for Ku-band phased arrays. Improved transformer balun with wriggly stub is applied to split the single input to differential and achieve high balance with reduced chip area. Two-stage polyphase filter (PPF) generates broadband I/Q signals with high accuracy. A main digital-to-analog convertor (DAC) controls the I/Q amplitude to achieve 6-bit phase resolution, while an auxiliary DAC compensates the amplitude/phase error introduced by balun and PPF. Consequently, high resolution along with low phase/gain error can be achieved. The phase shifter shows measured rms phase error of <4° at 12-18 GHz and <3° at 13-18 GHz. The measured mean gain is -2.5-1 dB, and the rms gain error is <0.9 dB at 12-18 GHz. The total power consumption is 37.5 mW, and chip size is $0.75 x 0.32$ mm$²$ excluding pads.

14 July 2022 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
YLYongjie Li
Yongjie Li
ZDZongming Duan
Zongming Duan
YFYun Fang
Yun Fang
XLXiao Li
Xiao Li
BDBiao Deng
Biao Deng
HGHao Gao
Hao Gao
This paper presents a digitally programmable bi-directional 7-bit passive phase shifter in a 65 nm CMOS technology. The core of this passive vector-synthesized phase shifter is a hybrid quadrature generator (HQG), an interstage matching network, and a passive vector modulator (PVM). This work proposes a high coupling-factor-based quadrature generator design methodology and demonstrates it with a compact vertical transformer. The interstage matching network between HQG and PVM is proposed to release the bandwidth bottleneck and achieve a 34% fractional frequency bandwidth. Two 6-bit X-type attenuators in the I and Q path form a high-resolution 12-bit controlling word. In 32–40 GHz, this 7-bit 360° phase shifter achieves a measured 2.8° step with 0.45-1.6° RMS phase error and 0.2-0.36 dB RMS magnitude error. With the broadband technique, its 3-dB bandwidth reaches 30.2-42.7 GHz with a 2.8° RMS phase error. Its in-band 1-dB compression point is 10.2 dBm. With the proposed compact HQG and PVM, this mm-wave passive phase shifter only occupies $220\times 630\,\,\mu \text{m}^{2}$ and has no power consumption.

23 May 2023 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
ZDZongming Duan
Zongming Duan
BWBowen Wu
Bowen Wu
YWYan Wang
Yan Wang
YFYun Fang
Yun Fang
YLYongjie Li
Yongjie Li
HGHao Gao
Hao Gao
This article presents a 76–81 GHz millimeter-wave (mm-wave) radar transceiver and a 2 $\times$ 8 multi-input multi-output (MIMO) antenna-in-package (AiP) for automotive radar applications. The proposed transceiver chip consists of a frequency-modulated-continuous-wave (FMCW) radar waveform generator, a 3-channel sub-transmitter (Tx), and a 4-channel receiver (Rx) with integrated analog-to-digital converters (ADC). A two-point modulation scheme and a digital-to-analog converter’s (DAC) dynamic bias technique are adopted in the FMCW generator to achieve fast chirps and broad modulation bandwidth. A maximum modulation bandwidth of 7.2 GHz is measured. A measured maximum chirp rate reaches 312 MHz/ $\mu$ s while the rms linearity stays less than 0.32%. The measured best-case chirp linearity peak error is 0.018% when the chirp rate is set as 9.21 MHz/ $\mu$ s. Two transceiver chips operating in a primary-secondary mode, 2 Tx antennas, and 8 Rx antennas are packaged in the embedded glass fan-out (eGFO) technology for better detection capability. Each Tx patch antenna is fed by three power amplifier (PA) outputs through a coaxial feeding structure. The measured Tx effective isotropic radiated power (EIRP) is improved by 7.5 dB compared to a single-feed antenna. Therefore, the chipset demo shows a detection range of up to 38.5 m. The transceiver chip is fabricated in a 65 nm CMOS technology and occupies 5.8 $\times$ 5.8 mm $^2$ . The packaged 2 $\times$ 8 MIMO AiP chipset is 24 $\times$ 24 mm $^2$ .

11 June 2019 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
DPDongfang Pan
Dongfang Pan
ZDZongming Duan
Zongming Duan
SCSudipto Chakraborty
Sudipto Chakraborty
LSLiguo Sun
Liguo Sun
PGPing Gui
Ping Gui
This letter presents a CMOS millimeter-wave low-noise amplifier (LNA) with flat gain and noise figure (NF) over the entire bandwidth of 60-90 GHz. The proposed double-neutralized technique in the third stage improves both maximum available gain and stability compared to the traditional neutralized common source technique. By partially distributing the center frequencies over three stages, the LNA achieves the wideband performance, with a power gain of 12.7 ± 1.5 dB over 60-90 GHz, NF of 6.3-8.4 dB for frequencies over the range of 75-90 GHz, and an input 1-dB compression point (P1dB) of -10 dBm at 77 GHz. Implemented in 65-nm CMOS, the LNA consumes 33.5 mW under 1.8 V with a silicon area of 0.45 mm² with pads included.

16 December 2020 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
DPDongfang Pan
Dongfang Pan
ZDZongming Duan
Zongming Duan
BWBowen Wu
Bowen Wu
YWYan Wang
Yan Wang
DHDong Huang
Dong Huang
LCLin Cheng
Lin Cheng
This paper presents a fully-integrated 76-81 GHz four-channel digitally controlled receiver (RX) in 65-nm CMOS, which utilizes a four-channel RX front-end with high linearity, an LO distribution network, and a reconfigurable 4-channel analog baseband (ABB). It achieves high integration level and is capable of flexible reconfigurability automotive radars with wide and flattened temperature characteristic. Each RX front-end consists of a low noise amplifier (LNA) employing a neutralized common source (CS) with configurable high-linearity and an active mixer with linearity-priority design. Additionally, a bias circuit with positive temperature coefficient is used for temperature compensation of the millimeter wave (mm-Wave) amplifiers and mixer. The RX chain offers tunable gain and bandwidth (BW) with digital control and bandwidth tuning for the ABB. The measured results show that the RX achieves an input 1-dB compression point (Pin,1dB) of -7 dBm and a noise figure of 11-26 dB across a temperature range from -45 to +125°C, both over the range of 76-81 GHz. The RX has a tunable gain from 18 to 66 dB over the 3-dB programmable IF BW from 0.1 to 10 MHz. The power consumption of the entire receiver is 0.52 W.

8 November 2022 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
DPDongfang Pan
Dongfang Pan
ZDZongming Duan
Zongming Duan
YWYan Wang
Yan Wang
CWChangwei Wang
Changwei Wang
YLYongjie Li
Yongjie Li
LCLin Cheng
Lin Cheng
This paper presents a 77-GHz 0.9-V wideband power amplifier (PA) with a digital power control scheme and two-way power combining. The power control is accomplished by digitally adjusting the width of the RF MOS to optimize the power added efficiency (PAE) of the PA. The proposed PA is implemented in a 28-nm CMOS process with a core chip area of 0.66 × 0.27 mm2. Measurement results show that the PA achieves a saturated output power (PSAT) of 12.15 dBm with a tuning range of 6.4-12 dBm at an input power of -5 dBm. The maximum PAE is 12% and the small signal gain is 23.6 dB at 81 GHz. The PA maintains a flat gain difference of ±2.12 to ±2.51 dB across a temperature range of -45-125∘ when operating in the range of 76-81 GHz and has a 3-dB bandwidth of 16.1 GHz (72.9-89 GHz).