In this paper, near infrared (NIR) absorbing dye and fluorane dye (FD) was successfully encapsulated into microcapsules with NIR light responsive performance. The NIR responsive microcapsules are able to be utilized in information recording and anti-counterfeiting fields. Specifically, the factors effecting on synthesis of NIR responsive microcapsules were studied in detail. Microcapsules with an average particle size of 0.2 ∼ 0.5 μm were prepared by adjusting the mass ratio of shell/core material, the viscosity of oil phase and the mass ratio of water/oil (W/O) phase. It was found that the preferred reaction condition was the feeding mass ratio of shell/core materiel at 1:2 and the W/O phase mass ratio of 2:1. When the feeding mass ratio of NIR absorbing dye and FD is 1/10, the NIR responsive microcapsules have the best coloration performance. Then the NIR responsive microcapsules were coated on aluminum substrate and scanned by 808 nm near-infrared laser, the image precision reached 20 μm.
High-performance water-based inkjet inks are critical for advancing inkjet printing technology. The performance of water-based inkjet inks depends largely on the dispersion stability of organic pigments. This imposes higher demands on the performance of polymeric dispersants. However, the relatively weak interaction between polymeric dispersants and organic pigments limits their performance in water-based inkjet inks. Consequently, it is crucial to seek dispersants that exhibit stronger interactions with pigments, alongside high performance, and universality. In this work, five types of polymeric nanoparticles (PNPs) with anion-π groups were synthesized via a simple emulsion polymerization method. Compared to traditional polymeric dispersants, anion-π type PNPs exhibited significant advantages including low viscosity, solvent resistance, and high temperature resistance. Stronger interactions, including salt-bridge hydrogen bondings (H-bonds) and π–π interactions, between these PNPs and different types of organic pigments were demonstrated by FTIR, UV-Vis, and XPS spectral tests. In particular, PNPs-5, bearing -PhSO3− groups, exhibited the strongest interaction with the organic pigments. The water-based inkjet inks, formulated with PNPs-5 serving as a dispersant, exhibited remarkable dispersion stability and outstanding weatherability. This work rationally constructs a strategy for preparing universally applicable polymeric dispersants to enhance the dispersion of pigments in water-based inkjet inks, thereby presenting a broader perspective for applications in the field of inkjet printing.
Cellulose nanofibrils (CNFs), with their high aspect ratio, have been widely used in various resin-based composites. To address the issues of easy agglomeration and poor interfacial compatibility of CNFs in hydrophobic acrylate photosensitive resins, this study adopted γ-methacryloyloxypropyltrimethoxysilane (KH570) for silane modification of CNFs, comparing heating–ultrasonication and heating–stirring methods. Mechanical properties were tested via LCD 3D printer to print splines. FTIR, XRD, and SEM verified successful modification, with the silicon substitution degree of heating–ultrasonication modification reaching 29.35%, significantly higher than heating–stirring (22.76%). Thermal analysis showed the main decomposition temperature increased from 400 °C to 420 °C, while DMA confirmed improved rigidity and glass transition temperature. Mechanical tests revealed a strength–toughness trade-off: the 1 wt% modified CNF composite exhibited a tensile strength of 45.17 MPa (9.41 MPa higher than unmodified CNFs at the same dosage), while a high dosage (3.5 wt%) enhanced toughness but reduced strength. The ultrasound-assisted silanization reaction proposed in this study optimizes the preparation process, achieving dual improvements in modification efficiency and dispersion. In terms of performance regulation, it reveals the quantitative control rules and trade-off characteristics of modified CNF content on the mechanical–thermal properties of the composites, providing a basis for performance customization. This study provides a feasible strategy for CNF modification in photopolymerizable 3D printing composites, expanding nanocellulose’s application in additive manufacturing.