Construction of S-scheme heterojunctions can effectively limit the recombination of photogenerated e− and h+, thus improving photocatalytic activity. Therefore, S-scheme ZnO/BiOCl (molar ratio = 1:2) n–n heterojunctions were synthesized via a hydrothermal–hydrolysis combined method in this study. The physical and chemical properties of the ZnO/BiOCl heterojunctions were characterized by XRD, XPS, SEM, TEM, DRS, N2 adsorption–desorption and ESR. Additionally, the photoelectric performances of ZnO/BiOCl heterojunctions were investigated with TPR, M–S plot and EIS. The results show that photocatalytic degradation of NOR by ZnO/BiOCl reached to 94.4% under simulated sunlight, which was 3.7 and 1.6 times greater than that of ZnO and BiOCl, respectively. The enhanced photodegradation ability was attributed to the enhancement of the internal electric field between ZnO and BiOCl, facilitating the active separation of photogenerated electrons and holes. The radical capture experiments and ESR results illustrate that the contribution of reactive species was in descending order of ·OH > h+ > ·O2− and a possible mechanism for the photodegradation of NOR over S-scheme ZnO/BiOCl heterojunctions was proposed.
S-scheme Fe2O3/g–C3N4 heterojunctions were successfully fabricated by the ultrasonic assistance method to remove norfloxacin (NOR) under visible light irradiation. The synthesized catalysts were well studied through various techniques. The obtained Fe2O3/g–C3N4 heterojunctions exhibited an optimal photocatalytic degradation of 94.7% for NOR, which was 1.67 and 1.28 times higher than using Fe2O3 and g–C3N4 alone, respectively. In addition, the kinetic constant of NOR removal with Fe2O3/g–C3N4 composites was about 0.6631 h−1, and NOR photo-deegradation was still 86.7% after four cycles. The enhanced photocatalytic activity may be mainly attributed to the formation of S-scheme Fe2O3/g–C3N4 heterojunctions with built-in electric fields, which were beneficial to the separation and transfer of photostimulated charge carriers. Furthermore, a possible photo-degradation mechanism of NOR for S-scheme Fe2O3/g–C3N4 heterojunctions is described.
Fe2O3/g-C3N4 nano-heterostructures for photocatalytic degradation of NOR (norfloxacin) were successfully prepared by combining co-precipitation and calcination methods. The g-C3N4, Fe2O3, and different composite ratios of Fe2O3/g-C3N4 (FeCNs) were characterized by XRD, SEM, XPS, UV-vis DRS, PL, and electrochemical tests, and the mechanism of photocatalytic degradation of NOR was analyzed. The results indicated that the semiconductor was attached to the surface of g-C3N4 in the form of α-Fe2O3 crystal with good crystalline structure. The composite of Fe2O3 with g-C3N4 increased the specific surface area of the material, effectively reduced the band gap, strengthened the photogenerated e−/h+ pair separation, and improved the photocatalytic performance of the composite. The photocatalytic degradation of NOR was consistent with the quasi-primary reaction kinetic model. Among them, FeCN-25wt% showed the optimal photocatalytic degradation of NOR (72.3%) with the largest degradation rate (k = 0.00900 min−1). The Fe2O3/g-C3N4 composite structure is inferred to be a Z-type heterojunction.
In this paper, BiVO4/CeVO4 composites were synthesized by hydrothermal method for photodegradation of norfloxacin (NFX) under visible light irradiation. The structure, morphologies, and optical properties of as-prepared samples were studied with XRD, SEM, BET, DRS, PL, XPS, EIS, and TPR. The results of the photocatalytic experiments demonstrated that the BiVO4/CeVO4 composites had more degradation performance of NFX compared with pure BiVO4 or CeVO4, which was attributed to the increased absorbance intensity of visible light, the reduced carrier coincidence rate, and the improved charge separation efficiency. Furthermore, the possible mechanism of the NFX degradation on BiVO4/CeVO4 composites under visible light irradiation was proposed according to the photocatalytic activity and free radicals trapping experiments.
The development of temperature-sensitive sensors upgraded by poly(N-isopropylacrylamide) (PNIPAM) represents a significant stride in enhancing performance and tailoring thermoresponsiveness. In this study, an array of temperature-responsive electrochemical sensors modified with different PNIPAM-based copolymer films were fabricated via a “coating and grafting” two-step film-forming technique on screen-printed platinum electrodes (SPPEs). Chemical composition, grafting density, equilibrium swelling, surface wettability, surface morphology, amperometric response, cyclic voltammograms, and other properties were evaluated for the modified SPPEs, successively. The modified SPPEs exhibited significant changes in their properties depending on the preparation concentrations, but all the resulting sensors showed excellent stability and repeatability. The modified sensors demonstrated favorable sensitivity to hydrogen peroxide and L-ascorbic acid. Furthermore, notable temperature-induced variations in electrical signals were observed as the electrodes were subjected to temperature fluctuations above and below the lower critical solution temperature (LCST). The ability to reversibly respond to temperature variations, coupled with the tunability of PNIPAM’s thermoresponsive properties, opens up new possibilities for the design of sensors that can adapt to changing environments and optimize their performance accordingly.
1 May 2018 in IOP Conference Series: Earth and Environmental Science
The zeolitized fly ash was synthesized by alkali melt hydrothermal method. The cation exchange capacity of zeolitized fly ash was far greater than the raw material fly ash. The main component was NaP1 zeolite (Na6Al6Si10O3212H2O), followed by mullite, and a small amount of heterozygous crystals. The effect of synthetic zeolite dosage, pH value, adsorption time and reaction temperature on the effect of nitrogen and phosphorus removal in petrochemical wastewater were investigated. The results showed that when the zeolitized fly ash dosage was 9 g/L, the petrochemical wastewater pH value was 6~8, adsorption time was 30 min and the reaction temperature was 30°C, the synthetic zeolite had the best effect on the removal of TN and TP in petrochemical wastewater, and the removal was 65.5%, 91.4% respectively. Besides, the concentrations of TN and TP in the effluent were 11.04 mg/L, 0.31 mg/L respectively. The concentrations met the sewage discharge standard in petrochemical industry of "Liaoning sewage comprehensive discharge standard" (DB21 1627-2008). This study was to realize the comprehensive utilization of solid waste and achieve the purpose of waste and waste.