Water electrolysis for hydrogen production is of great importance for the reliable use of renewable energy sources to have a clean environment. Electrolyzers play a key role in achieving the carbon-neutral target of 2050. Among the different types of water electrolyzers, proton exchange membrane water electrolyzers (PEMWEs) represent a well-developed technology that can be easily integrated into the smart grid for efficient energy management. In this study, a discrete dynamic mathematical model of a PEMWE was developed in MATLAB/Simulink to simulate cell performance under various operating conditions such as temperature, inlet flow rate, and current density loads. A lab-scale test bench was designed and set up, and a 5 cm2 PEMWE was tested at different temperatures (40–80 °C) and flow rates (3–12 mL/min), obtaining Linear Sweep Voltammetry (LSV), Cyclic Voltammetry (CV), Chrono-potentiometry (CP), and Electrochemical Impedance Spectroscopy (EIS) results for comparison and adjustment of the dynamic model. Sensitivity analysis of different operating variables confirmed that current density and temperature are the most influential factors affecting cell voltage. The parametric sensitivity of various chemical–physical and electrochemical parameters was also investigated. The most significant ones were estimated via non-linear least squares optimization to fine-tune the model. Additionally, strong correlations between these parameters and temperature were identified through regression analysis, enabling accurate performance prediction across the studied temperature range.
Transition metals such as nickel and cobalt as an alternative to Pt and Pd can be used for oxygen evolution reactions (OERs) and hydrogen production reactions (HERs) in alkaline environments, facilitating green hydrogen production as a sustainable alternative to fossil fuels. In this study, an NiCo2O4 catalyst was produced by a sono-hydrothermal method using urea as a hydrolysis agent. The electrochemical performance of the catalyst-coated NiFelt electrode was evaluated at different KOH concentrations (0.25, 0.5, and 1 M) and four operating temperatures in the interval of 20–80 °C. The electrode characteristics were investigated via electrochemical spectroscopy (cyclic voltammetry, EIS, multistep chronopotentiometry, multistep chronoamperometry) using two different reference electrodes (Ag/AgCl and Hg/HgO), to obtain insight into the anodic and cathodic peaks. XRD, SEM, EDS, and TEM analyses confirmed the purity, structure, and nanoscale particle size (20–45 nm) of the NiCo2O4 catalyst. The electrode showed symmetric CV with Ag/AgCl, making this reference electrode more appropriate for capacitance measurements, while Hg/HgO proved advantageous for EIS in alkaline solutions due to reduced noise. The overpotential of the catalyst-coated NiFelt decreased by 108 mV at 10 mA/cm2 compared to bare NiFelt, showing a good potential for its application in anion exchange membranes and alkaline electrolyzers at an industrial scale.
This study investigates the synthesis and electrochemical performance of NiCo2O4 anodes for water electrolysis in both alkaline and anion exchange membrane (AEM) configurations. An engineered direct growth method using a urea-mediated sono-hydrothermal approach was used to synthesize NiCo2O4 on Ni felt, creating a binder-free electrode optimized for an alkaline environment. We evaluated the electrode's performance in AEM water electrolysis, comparing it with a spray-coated electrode incorporating ionomers and the same electrocatalyst. Our findings highlight that direct-grown binder-free electrodes, produced through varied synthesis routes, exhibit remarkable activity and stability in AEM cells operated in dry cathode mode (1.90 V @ 1 A cm-2), with seamless interaction between the catalyst layer and the membrane. Moreover, this binder-free NiCo2O4 on Ni felt is also an efficient anode under alkaline electrolysis configuration, exhibiting high stability and remarkable performance (1.78 V @ 1 A cm-2, 1.92 V @ 2 A cm-2), ascribable to the increased conductivity and improved charge transfer resistance of the catalyst layer.
Platinum‐group‐metal‐free catalysts represent a necessary economic choice for industrial‐scale anion exchange membrane (AEM) electrolyzers. A three‐dimensional binder‐free spinel Ni 1−x Fe x Co 2 O 4 (x = 0.1–0.4) electrocatalyst is synthesized directly on nickel felt via a urea‐mediated sono‐hydrothermal method. The nanorod‐shaped morphology is chosen to reduce mass‐transfer limitations while maintaining catalyst activity. NiFeCo‐2 (20% Fe) offers the optimal balance of iron content, lattice modification, homogeneous nanorod coverage, and surface area, showing the best oxygen evolution reaction (OER) activity, giving 282 mV overpotential at 10 mA cm −2 and 53 mV dec −1 Tafel slope. As the anode in an anion exchange membrane water electrolyzer (AEMWE), NiFeCo‐2 reaches 1.748 V at 1 A cm −2 , 1.92 V at 2 A cm −2 , and 2.09 V at 4 A cm −2 in wet cathode mode, and sustains stable operation through two 72‐h accelerated stress test sequences under both wet and dry cathode feeding. Operation starting in dry cathode mode shows better performance retention than in wet mode. Post‐test electron microscopy and textural analysis confirm that the nanorod catalyst layer remains largely preserved, indicating that the observed voltage increase is consistent with resistance growth rather than catalyst loss. These results highlight binder‐free Ni 1−x Fe x Co 2 O 4 as a promising, affordable anode for AEM water electrolysis.