An analytical solution in closed form of the advection-dispersion equation in one-dimensional contaminated soils is proposed in this paper. This is valid for non-conservative solutes with first order reaction, linear equilibrium sorption, and a time-dependent Robin boundary condition. The Robin boundary condition is expressed as a combined production-decay function representing a realistic description of the source release phenomena in time. The proposed model is particularly useful to describe sources as the contaminant release due to the failure in underground tanks or pipelines, Non Aqueous Phase Liquid pools, or radioactive decay series. The developed analytical model tends towards the known analytical solutions for particular values of the rate constants.
Water electrolysis for hydrogen production is of great importance for the reliable use of renewable energy sources to have a clean environment. Electrolyzers play a key role in achieving the carbon-neutral target of 2050. Among the different types of water electrolyzers, proton exchange membrane water electrolyzers (PEMWEs) represent a well-developed technology that can be easily integrated into the smart grid for efficient energy management. In this study, a discrete dynamic mathematical model of a PEMWE was developed in MATLAB/Simulink to simulate cell performance under various operating conditions such as temperature, inlet flow rate, and current density loads. A lab-scale test bench was designed and set up, and a 5 cm2 PEMWE was tested at different temperatures (40–80 °C) and flow rates (3–12 mL/min), obtaining Linear Sweep Voltammetry (LSV), Cyclic Voltammetry (CV), Chrono-potentiometry (CP), and Electrochemical Impedance Spectroscopy (EIS) results for comparison and adjustment of the dynamic model. Sensitivity analysis of different operating variables confirmed that current density and temperature are the most influential factors affecting cell voltage. The parametric sensitivity of various chemical–physical and electrochemical parameters was also investigated. The most significant ones were estimated via non-linear least squares optimization to fine-tune the model. Additionally, strong correlations between these parameters and temperature were identified through regression analysis, enabling accurate performance prediction across the studied temperature range.
Transition metals such as nickel and cobalt as an alternative to Pt and Pd can be used for oxygen evolution reactions (OERs) and hydrogen production reactions (HERs) in alkaline environments, facilitating green hydrogen production as a sustainable alternative to fossil fuels. In this study, an NiCo2O4 catalyst was produced by a sono-hydrothermal method using urea as a hydrolysis agent. The electrochemical performance of the catalyst-coated NiFelt electrode was evaluated at different KOH concentrations (0.25, 0.5, and 1 M) and four operating temperatures in the interval of 20–80 °C. The electrode characteristics were investigated via electrochemical spectroscopy (cyclic voltammetry, EIS, multistep chronopotentiometry, multistep chronoamperometry) using two different reference electrodes (Ag/AgCl and Hg/HgO), to obtain insight into the anodic and cathodic peaks. XRD, SEM, EDS, and TEM analyses confirmed the purity, structure, and nanoscale particle size (20–45 nm) of the NiCo2O4 catalyst. The electrode showed symmetric CV with Ag/AgCl, making this reference electrode more appropriate for capacitance measurements, while Hg/HgO proved advantageous for EIS in alkaline solutions due to reduced noise. The overpotential of the catalyst-coated NiFelt decreased by 108 mV at 10 mA/cm2 compared to bare NiFelt, showing a good potential for its application in anion exchange membranes and alkaline electrolyzers at an industrial scale.
Increasing conditions of economic and social well-being have led to an increase in waste production. Among the waste products, a significant portion consists of plastic materials that are popular in the components of consumer goods. For this reason, the conversion of plastic to energy via controlled combustion and plastic to fuel via thermal/catalytic pyrolysis or gasification can be proposed to treat the residual heterogeneous mixed plastics that cannot be recovered as individual polymers. The quality and type of fuels that are possible to obtain from these processes are different, as is the quality of their emissions, which generally contain VOCs, PCBs, dioxins, PAHs, and heavy metals. In this work, we propose a methodology based on human health risk assessment to compare controlled combustion and catalytic pyrolysis. Many pathways are analyzed, and pollutant concentrations are computed in the atmosphere, water, vegetables, fish, and food. Exposure is evaluated for inhalation and ingestion routes by taking into account uncertainties. Our results show that the risk profile of catalytic pyrolysis is low. Controlled combustion remains an interesting process, but even if Best Available Technologies (BAT) are adopted, the cancer risk due to PAHs contained in particulate is around the threshold for people living near the plant if a long period of operation is considered.
Awareness is growing that, besides several neurotoxic effects, cholinomimetic drugs able to interfere the cholinergic neurotransmitter system may exert a teratogen effect in developing embryos of vertebrate and invertebrate organisms. Cholinomimetic substances exert their toxic activity on organisms as they inhibit the functionality of the cholinergic system by completely or partially replacing the ACh molecule both at the level of the AChE active site and at the level of acetylcholine receptors. In this work, we focused the attention on the effects of muscarinic antagonist (atropine) and agonist (carbachol) drugs during the early development and ontogenesis of chick embryos. An unsteady-state mathematical model of the drug release and fate was developed, to synchronize exposure to a gradient of drug concentrations with the different developmental events. Since concentration measures in time and space cannot be taken without damaging the embryo itself, the diffusion model was the only way to establish at each time-step the exact concentration of drug at the different points of the embryo body (considered two-dimensional up to the 50 h stage). This concentration depends on the distance and position of the embryo with respect to the releasing source. The exposure to carbachol generally enhanced dimensions and stages of the embryos, while atropine mainly caused delay in development and small size of the embryos. Both the drugs were able to cause developmental anomalies, depending on the moment of development, in a time- and dose-dependent way, regardless the expression of genes driving each event. Graphical abstract Early chick embryos were exposed to muscarinic drugs in a spatial-temporal context. Effects were stage-(time) dependent, according to distance and position of the source. Atropine inhibited growth, mainly interfering with the cephalic process formation and heart differentiation; carbachol increased growth reducing differentiation. Interferences may be exerted by alteration of calcium responses to naturally occurring morphogen-driven mechanisms.