Water electrolysis for hydrogen production is of great importance for the reliable use of renewable energy sources to have a clean environment. Electrolyzers play a key role in achieving the carbon-neutral target of 2050. Among the different types of water electrolyzers, proton exchange membrane water electrolyzers (PEMWEs) represent a well-developed technology that can be easily integrated into the smart grid for efficient energy management. In this study, a discrete dynamic mathematical model of a PEMWE was developed in MATLAB/Simulink to simulate cell performance under various operating conditions such as temperature, inlet flow rate, and current density loads. A lab-scale test bench was designed and set up, and a 5 cm2 PEMWE was tested at different temperatures (40–80 °C) and flow rates (3–12 mL/min), obtaining Linear Sweep Voltammetry (LSV), Cyclic Voltammetry (CV), Chrono-potentiometry (CP), and Electrochemical Impedance Spectroscopy (EIS) results for comparison and adjustment of the dynamic model. Sensitivity analysis of different operating variables confirmed that current density and temperature are the most influential factors affecting cell voltage. The parametric sensitivity of various chemical–physical and electrochemical parameters was also investigated. The most significant ones were estimated via non-linear least squares optimization to fine-tune the model. Additionally, strong correlations between these parameters and temperature were identified through regression analysis, enabling accurate performance prediction across the studied temperature range.
Transition metals such as nickel and cobalt as an alternative to Pt and Pd can be used for oxygen evolution reactions (OERs) and hydrogen production reactions (HERs) in alkaline environments, facilitating green hydrogen production as a sustainable alternative to fossil fuels. In this study, an NiCo2O4 catalyst was produced by a sono-hydrothermal method using urea as a hydrolysis agent. The electrochemical performance of the catalyst-coated NiFelt electrode was evaluated at different KOH concentrations (0.25, 0.5, and 1 M) and four operating temperatures in the interval of 20–80 °C. The electrode characteristics were investigated via electrochemical spectroscopy (cyclic voltammetry, EIS, multistep chronopotentiometry, multistep chronoamperometry) using two different reference electrodes (Ag/AgCl and Hg/HgO), to obtain insight into the anodic and cathodic peaks. XRD, SEM, EDS, and TEM analyses confirmed the purity, structure, and nanoscale particle size (20–45 nm) of the NiCo2O4 catalyst. The electrode showed symmetric CV with Ag/AgCl, making this reference electrode more appropriate for capacitance measurements, while Hg/HgO proved advantageous for EIS in alkaline solutions due to reduced noise. The overpotential of the catalyst-coated NiFelt decreased by 108 mV at 10 mA/cm2 compared to bare NiFelt, showing a good potential for its application in anion exchange membranes and alkaline electrolyzers at an industrial scale.