Dan Yang

Ms. Dan Yang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 November 2022 in Buildings
Verified
Journal Article
Open access
PDF file
Rui GUORui GUO
Rui GUO
DYDan Yang
Dan Yang
BJbin Jia
bin Jia
DTDeyun Tang
Deyun Tang
A total of nine specimens were constructed and tested under cyclic loads to investigate the differences in seismic behavior between glass fiber-reinforced polymer (GFRP)-reinforced concrete (RC) joints and RC beam-to-column joints. The experimental parameters included stirrup ratios, axial pressure ratios and concrete strength of the beam-to-column joints. The cyclic loading test results showed that the GFRP-RC beam-to-column joints can withstand significantly high lateral deformations without exhibiting brittle failure. Moreover, the RC beam-to-column joint exhibited significantly higher energy dissipation and residual displacement than the GFRP-RC beam-to-column joint by 50% and 60%, respectively. Finally, a shear capacity calculation method for the core zone of this kind of joint was proposed, which agreed well with the experimental results.

9 October 2024 in Buildings
Verified
Journal Article
Open access
PDF file
QYQU YU
QU YU
YYYongqing Yang
Yongqing Yang
QLQisong Lin
Qisong Lin
DYDan Yang
Dan Yang
High-toughness resin concrete steel mesh (HTRCS) composites, as a novel reinforcement material, are extensively employed, yet there has been a lack of comprehensive quantitative studies on them, and our knowledge about them predominantly relies on experimental investigations. To delve into the shear performance of reinforced concrete beams fortified with HTRCS, this research executed four-point bending static load experiments on a benchmark of two standard beams and six HTRCS-reinforced beams. The results demonstrate that the shear bearing capacity of the reinforced concrete beams was notably enhanced with HTRCS, ranging from approximately 10% to 65%. Further examination revealed that the stiffness of the specimens is significantly influenced by the HTRCS thickness, shear–span ratio, and concrete strength, with the shear–span ratio exerting the most notable impact on stiffness. This analysis furnishes a solid theoretical foundation for the utilization of HTRCS.