Kazakhstan's crude oil contains significant amounts of heavy hydrocarbons that solidify as wax at lower temperatures, leading to reduced flow rates and potential blockages in pipelines. Paraffin, a substantial component of crude oil, crystallizes below its pour point, posing challenges for maintaining efficient crude oil transportation. Addressing wax deposition is essential for optimizing oil flow and meeting global energy demand. This article presents an innovative method for forecasting paraffin deposition in Kazakh crude oil, using its chemical composition and thermobaric conditions. The methodology encompassed data analysis, ASTM-standard laboratory tests, and computations employing modified equations for fusion properties calculation. Outcomes comprise computed temperatures, enthalpy, and heat capacity related to melting, along with revised correlations for melting and pour points specific to Kazakh crude oils. The melting point correlation was modified to fit the properties of Kazakh crude oils, resulting in standard deviation of 0.55 %. Computed pour points for hydrocarbons improved by 17 % respectively. As a result of the research a novel software tool was developed and evaluated, highlighting the project’s contribution in providing an adjusted thermodynamic model for paraffin deposition forecasting. Comparisons between the developed software, PVTSim, and field data showed the wax appearance temperature (WAT) predictions closely aligned, with 0.74 % of error. This numerical tool shows potential in predicting wax deposition, thus aiding in the planning of oil production and refining processes in Kazakhstan. The importance of this work extends to its potential economic impact on companies and the nation, as well as its environmental benefits by facilitating eco-friendly planning of oil production facilities. Future research could expand on these findings to further enhance predictive models of paraffin precipitation across diverse conditions
3 April 2025 in Engineering, Technology & Applied Science Research
This study presents an in-depth investigation into the fusion properties, specifically the melting point and solid-state transition temperature, of crude oil samples from five distinct fields in Kazakhstan. These properties are critical for understanding and predicting wax precipitation, which poses significant challenges in the petroleum industry, particularly in cold climates where wax deposition can obstruct pipelines. Using advanced analytical techniques, including gas chromatography and pour point testing, new correlations were developed to more accurately predict these fusion properties for Kazakhstani crude oil. The proposed correlations outperform the existing models, offering closer alignment with the experimental data across a wide range of hydrocarbon compounds. The novelty of this research lies in its tailored approach, which integrates experimental data, existing predictive models, and Python programming to develop a region-specific solution for Kazakhstani crude oil. By addressing the limitations of generalized models, the study highlights the importance of adapting predictive frameworks to specific oil compositions and regional conditions. These findings have substantial implications for the optimization of crude oil transportation and storage in cold environments, where wax deposition is a prevalent issue. The improved accuracy of the proposed correlations enables better predictability of wax-related flow assurance problems, contributing to more efficient and safer operations in the oil and gas industry. Furthermore, this work establishes a robust methodological framework that can be extended to other crude oil types and operational scenarios, paving the way for advancements in predictive modeling of wax precipitation under diverse environmental conditions.
1 April 2026 in Kazakhstan journal for oil & gas industry
Background: Preventing contamination of technogenic fractures formed by hydraulic fracturing and by chemical interaction of reactive fluids with the rock is a key condition for increasing reservoir fluid production rates. Reducing the risks of formation and precipitation of insoluble reaction products within the fracture and the near-fracture zone is achieved through experimental research and mathematical modelling of the interaction processes between technological fluids, reservoir rocks, and formation fluids. At the same time, the most important task in preparation for experiments, modelling, and the actual execution of operations can be considered the identification of the principal interacting elements entering into reactions whose products may reduce stimulation efficiency, especially under conditions of limited availability of core material and specialized software for comprehensive chemical molecular modelling. Consequently, theoretical investigation of the main causes of unsuccessful chemical treatments of formations and hydraulic fracturing operations with chemically active technological fluids, as well as assessment of the risks of negative events, becomes particularly important. Aim: Increasing the efficiency of stimulation by acid hydraulic fracturing methods through optimization of technological fluid composition and prevention of the negative impact on the reservoir of reaction products formed by interaction of reservoir rocks or formation fluids with technological fluids. Materials and methods: To evaluate the main causes of insoluble precipitate formation and other factors for reduced stimulation efficiency, a detailed literature review was carried out, and mechanisms increasing and decreasing the corresponding risks were identified. A mechanical and lithological model was constructed in the vicinity of several wells of one of the Central Asian fields, which shows that one of the main reactions leading to negative consequences may occur when several conditions are simultaneously met. The feasibility of such conditions was assessed based on calculations and modelling. Results: Analysis of the geological and mechanical environment at one of the fields and a detailed study of the main reactions with formation rocks made it possible to identify the causes of ineffective acid hydraulic fracturing treatments. A treatment program was prepared aimed at preventing future risks of reduced efficiency of acid hydraulic fracturing. Conclusion: The applied approach is aimed at the justified, targeted selection of hydraulic fracturing technological fluids, which makes it possible to reduce risks or prevent fracture plugging by reaction products, avoid clay migration and swelling, and other negative impacts on the filtration properties of the formation in the vicinity of technogenic fractures. All these measures are aimed at improving the efficiency of stimulation by acid hydraulic fracturing.
Currently, the oil and gas segment of Kazakhstan is facing such a problem as paraffin deposits. The problem associated with the deposition and crystallization of paraffin causes large-scale difficulties, and models for predicting wax precipitation are limited to specific types of oil, and therefore there is a need to improve them. The authors of this article analyzed and developed a predictive model of paraffin deposition from crude oil for Kazakhstani fields. The work is based on the study of Lira-Galeana et al., which considers the multicomponent deposition of immiscible solids from an oil mixture - a multi-solid model. During the study, it was found out that the Lira-Galeana model uses the equation of state, the volatility properties of the components and the activity coefficient. The Poynting effect was considered at high pressures in the system. For experimental studies, oil samples were taken from two fields. The component composition of the oil, the pour point and loss of fluidity of the oil, as well as the melting point temperatures were determined in laboratory conditions. The amount of paraffin sludge from the oil was estimated experimentally. The results obtained are fully consistent with the analytical solution. During laboratory tests, it was found that the oil from the second field was heavier, and the degree of crystallization of paraffin was more significant than that of oil from the first field under the same conditions. Using this predictive model, the authors were able to predict the amount of solid precipitation from crude oil during the year, depending on changes in ambient temperature.
Characterizing thin sandstone reservoirs remains challenging where strong lateral heterogeneity and limited seismic resolution make individual sand bodies difficult to distinguish. This study presents an integrated approach to reservoir characterization using 3D seismic and well-log data from a mature oilfield. Conventional seismic attributes, Highlight analysis, and spectral decomposition were combined with post-stack sparse-spike acoustic impedance inversion and AI-assisted high-resolution geostatistical inversion. Amplitude and Highlight attributes revealed consistent sandstone distribution patterns, while spectral decomposition identified distinct frequency responses at 55, 60 and 70 Hz across the investigated intervals. Conventional acoustic impedance inversion reproduced the main sandstone units but only partially resolved individual sand bodies approximately 2–8 m thick. The high-resolution geostatistical gamma-ray (GR) inversion sections revealed finer lithological variations than the conventional acoustic impedance inversion results. The upper intervals showed relatively continuous sandstone development, whereas the deeper intervals exhibited thinner sand bodies, greater siltstone development, and more pronounced lateral heterogeneity. These findings demonstrate the value of combining complementary seismic interpretation and inversion techniques to characterize complex sandstone reservoirs. The resulting geological interpretation provides a basis for further assessment of reservoir compartmentalization and potential interwell connectivity.
3 April 2024 in Kazakhstan journal for oil & gas industry
Based on geological and geophysical data, a lithological and stratigraphic section of the basement and sedimentary cover of the Alakol basin was compiled, detailing the lithological and paleogeographic settings. Oil source rocks, reservoirs and seals are identified. The tectonic zoning scheme is substantiated, the structural characteristics of the faults and the lithologic-facial features of the section are given. A complex multi-stage tectonic evolution has been identified. Potentially promising stratigraphic oil and gas complexes have been identified – Jurassic (Mesozoic) and Upper Devonian (Famennian) – Lower Carboniferous-Permian (Paleozoic). The deep structure of the region is illustrated by a geological and geophysical section. The correlation of the stratigraphic range of hydrocarbon potential of the Alakol basin was carried out. A probabilistic forecast for the search for crude hydrocarbons is substantiated. On this geological and geophysical basis, the design of the borehole was developed and its position for opening the cover and basement rocks was outlined.