Dinara Delikesheva

Ms. Dinara Delikesheva

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 October 2024 in Energies
Verified
Journal Article
Open access
PDF file
AZAssel Zholdybayeva
Assel Zholdybayeva
ASAskar Syzdykov
Askar Syzdykov
PPPeyman Pourafshary
Peyman Pourafshary
JIJamilyam Ismailova
Jamilyam Ismailova
DDDinara Delikesheva
Dinara Delikesheva
Both steam and hot water flooding of high-viscosity oils in the presence of swelling clays are difficult methods for producing oil efficiently because of potential formation permeability reduction. This paper pertains to heavy oil recovery from the East Moldabek formation where the oil API gravity is about 22 and is inundated with swelling clays. To achieve this, we used the IntersectTM reservoir simulator to compare oil recovery economics using both hot water and steam injection as a function of steam cycle duration, temperature, and steam dryness. We also studied clay swelling in the East Moldabek formation where clay poses a significant challenge due to its impact on permeability reduction. In this research, we developed an equation based on experimental data to establish a relationship between water mineralization and permeability in the East Moldabek formation. The equation provides valuable insight on how to mitigate clay swelling which is crucial for enhancing oil recovery efficiency—especially in sandstone reservoirs. Our modeling studies provide the recovery efficiencies for salinities of the hot water EOR versus cyclic steam EOR methods in a formation containing swelling clays. Specifically, the reduction in formation permeability as a function of the distilled water fraction is the controlling parameter in hot water or steam flooding—when the formation water mixture becomes less saline, oil recovery decreases. Our research shows that clay swelling can significantly impact cyclic steam stimulation outcomes, potentially reducing its effectiveness, while hot water flooding may offer a more cost-effective and operationally feasible solution in formations where clay swelling is a concern. Economic analysis reveals the potential for achieving an optimal favorable condition for hot water injection. Therefore, this paper provides a guideline on how to conduct thermal oil recovery for heavy oils in fields with high clay content such as the East Moldabek deposit.

31 October 2023 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
AKArman A. Kabdushev
Arman A. Kabdushev
DDDinara Delikesheva
Dinara Delikesheva
DKDarkhan Korgasbekov
Darkhan Korgasbekov
BMBauyrzhan Manapbayev
Bauyrzhan Manapbayev
MKMarzhan Kalmakhanova
Marzhan Kalmakhanova
The object of the research is the quality of cementing oil and gas wells with increasing the strength and deformation capacity of cement stone using basalt fibers. Cement slurry used in cementing oil and gas wells faces the problem of failure under the influence of hydraulic fracturing and perforation procedures. This failure leads to the formation of cracks and may require remedial cementing, which increases operating costs and complicates the process of oil and gas production. Moreover, this problem can lead to premature well water breakthrough and cause serious damage such as oil and gas shows and blowouts, which poses a threat to the environment and safety. To solve the problem of the destruction of cement stone under external influences, the study proposed the approach of reinforcing with basalt fiber. During the study, a cementing material based on Portland cement, reinforced with various concentrations of basalt fibers (0.1 %, 0.5 %, 1 % and 2 %), was developed and tested. Cement strength tests at 2, 7, and 14 days, along with deformation monitoring under load, were performed. The addition of basalt fibers to cement stone significantly improved its strength characteristics. The most successful results were achieved with the addition of 0.5 % basalt fibers, resulting in an 11 % increase in compressive and flexural strength. Basalt fibers complement the structure of cement stone, increasing its ability to deform. One of the key features of the obtained results is the possibility of improving the strength of the cement stone without losing its fluidity as a cement slurry. The results obtained are applicable in the development and production of cement materials based on basalt fibers. This will improve the quality of well cementing and reduce the risks of complications

25 June 2025 in Energies
Verified
Journal Article
Open access
PDF file
NZNazerke Zhumakhanova
Nazerke Zhumakhanova
Kamy SepehrnooriKamy Sepehrnoori
Kamy Sepehrnoori
DDDinara Delikesheva
Dinara Delikesheva
JIJamilyam Ismailova
Jamilyam Ismailova
Fadi KhagagFadi Khagag
Fadi Khagag
Anthropogenic CO2 emissions are a major driver of climate change, highlighting the urgent need for effective mitigation strategies. Carbon Capture, Utilization, and Storage (CCUS) offers a promising approach, particularly through CO2-enhanced gas recovery (EGR) in shale reservoirs, which enables simultaneous hydrocarbon production and CO2 sequestration. This study employs a numerical simulation model to compare two injection strategies: CO2 flooding and huff-and-puff (H&P). The results indicate that, without accounting for key mechanisms such as adsorption and molecular diffusion, CO2 H&P provides minimal improvement in methane recovery. When adsorption is included, methane recovery increases by 9%, with 14% of the injected CO2 stored over 40 years. Incorporating diffusion enhances recovery by 19%, although with limited storage potential. In contrast, CO2 flooding improves methane production by 26% and retains up to 94% of the injected CO2. Higher storage efficiency is observed in reservoirs with high porosity and low permeability, particularly in nano-scale pore systems. Overall, CO2 H&P may be a viable EGR option when adsorption and diffusion are considered, while CO2 flooding demonstrates greater effectiveness for both enhanced gas recovery and long-term CO2 storage in shale formations.

15 December 2019 in Series of Geology and Technical Sciences
Verified
Journal Article
Closed access
MBM. Biletsky
M. Biletsky
INIu. Nifontov
Iu. Nifontov
BRBoranbay Ratov
Boranbay Ratov
DDDinara Delikesheva
Dinara Delikesheva

31 October 2023 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
JIJamilyam Ismailova
Jamilyam Ismailova
DDDinara Delikesheva
Dinara Delikesheva
AAAibek Abdukarimov
Aibek Abdukarimov
NZNargiz Zhumanbetova
Nargiz Zhumanbetova
ASAdel Sarsenova
Adel Sarsenova
Compositional reservoir modeling often requires a large number of instantaneous calculations. To reduce the dimension of the problem and the amount of computation, several components are usually grouped into pseudo-components. However, to model surface processes, it is important to have a detailed phase composition. Accurate fluid composition requires laboratory analysis, which is costly and time-consuming. This study addresses this issue by introducing an advanced delumping procedure aimed at providing an accurate fluid characterization. The primary objective was to develop a sophisticated delumping procedure capable of precisely describing detailed fluid compositions from calculations involving mixtures. Its goal is to reduce reliance on laboratory analysis, making the process more efficient. The results obtained from this research can improve the planning and modeling of surface facilities, developed under conditions of reservoir pressure above saturation pressure. To test the effectiveness of the proposed delumping and achieve the goals set, experiments were carried out on compositional simulation of oil production in the Caspian basin. The procedure uses reduction parameters calculated from simulation data and an analytical approach to characterize fluid compositions from the original data. Detailed fluid compositions obtained through laboratory PVT analysis were then compared with the results of simulation using PVTsim software and numerical delumping procedures. The findings showed a close agreement between the outcomes of detailed compositions obtained through the delumping procedure and of laboratory analysis, with an average deviation less than 5 %, confirming the effectiveness of delumping as an alternative method for obtaining an accurate fluid composition

28 June 2024 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
ASAdel Sarsenova
Adel Sarsenova
JIJamilyam Ismailova
Jamilyam Ismailova
AIAbdulakhat Ismailov
Abdulakhat Ismailov
DDDinara Delikesheva
Dinara Delikesheva
AKAigerim Kaidar
Aigerim Kaidar
Kazakhstan's crude oil contains significant amounts of heavy hydrocarbons that solidify as wax at lower temperatures, leading to reduced flow rates and potential blockages in pipelines. Paraffin, a substantial component of crude oil, crystallizes below its pour point, posing challenges for maintaining efficient crude oil transportation. Addressing wax deposition is essential for optimizing oil flow and meeting global energy demand. This article presents an innovative method for forecasting paraffin deposition in Kazakh crude oil, using its chemical composition and thermobaric conditions. The methodology encompassed data analysis, ASTM-standard laboratory tests, and computations employing modified equations for fusion properties calculation. Outcomes comprise computed temperatures, enthalpy, and heat capacity related to melting, along with revised correlations for melting and pour points specific to Kazakh crude oils. The melting point correlation was modified to fit the properties of Kazakh crude oils, resulting in standard deviation of 0.55 %. Computed pour points for hydrocarbons improved by 17 % respectively. As a result of the research a novel software tool was developed and evaluated, highlighting the project’s contribution in providing an adjusted thermodynamic model for paraffin deposition forecasting. Comparisons between the developed software, PVTSim, and field data showed the wax appearance temperature (WAT) predictions closely aligned, with 0.74 % of error. This numerical tool shows potential in predicting wax deposition, thus aiding in the planning of oil production and refining processes in Kazakhstan. The importance of this work extends to its potential economic impact on companies and the nation, as well as its environmental benefits by facilitating eco-friendly planning of oil production facilities. Future research could expand on these findings to further enhance predictive models of paraffin precipitation across diverse conditions