Heavy oil and extra-heavy oil represent mobility-limited petroleum resources because supramolecular associations of asphaltenes and resins, together with strong interfacial resistance, generate extremely high apparent viscosity. In recent years, nanotechnology has emerged as a promising approach for viscosity management and enhanced oil recovery (EOR). This review critically examines recent advances in nano-assisted viscosity reduction from a reservoir-operational perspective and organizes the literature into two field-relevant categories: metal-based and non-metal nano-systems. Metal-based nanoparticles (NPs) mainly promote catalytic aquathermolysis and related bond-cleavage and hydrogen-transfer reactions under hydrothermal conditions, enabling partial upgrading and persistent viscosity reduction during thermal recovery. In contrast, non-metal nano-systems—particularly silica- and graphene-oxide-derived materials—primarily operate through interfacial and structural regulation mechanisms at low or moderate temperatures. These effects include wettability alteration, interfacial-film stabilization, modification of asphaltene aggregation behavior, and the formation of dispersed-flow regimes such as Pickering-type emulsions that reduce apparent flow resistance in multiphase systems. Beyond summarizing nanomaterial types, this review emphasizes reservoir-scale considerations governing field applicability, including brine stability, NPs transport and retention in porous media, and formulation compatibility. Comparative analysis highlights the distinct operational windows of thermal catalytic nano-systems and cold-production nano-systems, providing a reservoir-oriented framework for designing nano-assisted viscosity-reduction technologies.
31 October 2023 in Eastern-European Journal of Enterprise Technologies
Compositional reservoir modeling often requires a large number of instantaneous calculations. To reduce the dimension of the problem and the amount of computation, several components are usually grouped into pseudo-components. However, to model surface processes, it is important to have a detailed phase composition. Accurate fluid composition requires laboratory analysis, which is costly and time-consuming. This study addresses this issue by introducing an advanced delumping procedure aimed at providing an accurate fluid characterization. The primary objective was to develop a sophisticated delumping procedure capable of precisely describing detailed fluid compositions from calculations involving mixtures. Its goal is to reduce reliance on laboratory analysis, making the process more efficient. The results obtained from this research can improve the planning and modeling of surface facilities, developed under conditions of reservoir pressure above saturation pressure. To test the effectiveness of the proposed delumping and achieve the goals set, experiments were carried out on compositional simulation of oil production in the Caspian basin. The procedure uses reduction parameters calculated from simulation data and an analytical approach to characterize fluid compositions from the original data. Detailed fluid compositions obtained through laboratory PVT analysis were then compared with the results of simulation using PVTsim software and numerical delumping procedures. The findings showed a close agreement between the outcomes of detailed compositions obtained through the delumping procedure and of laboratory analysis, with an average deviation less than 5 %, confirming the effectiveness of delumping as an alternative method for obtaining an accurate fluid composition
11 September 2018 in Journal of Environmental Management and Tourism
Most of oil companies today are focused on increasing the recovery factor from their oil fields. New drilling and well technologies as well as last advances in reservoir management, monitoring and Enhanced Oil Recovery (EOR) methods are thought to play a major role to meet the future demand of energy. Current decline in discovery of new oilfields intensified by a decline in oil prices make industrial companies to work on development of new efficient and economic techniques that will allow better production at lower cost. One such technology developed at Kazakh National Research University is presented in this paper. The latter propose the use of specific perforated holes on tubing liners in order to control the rate of water injection into variably permeable layers and to prevent non-uniform displacement of oil. The study was initially conducted on experimental facility that proved a positive correlation between the perforation density and water flow rates. Then the simulation test was performed using the data from several Kazakhstani oil fields. The results show an increase of sweep efficiency as well as a decrease in water-cut compared to traditional well case.
28 June 2024 in Eastern-European Journal of Enterprise Technologies
Kazakhstan's crude oil contains significant amounts of heavy hydrocarbons that solidify as wax at lower temperatures, leading to reduced flow rates and potential blockages in pipelines. Paraffin, a substantial component of crude oil, crystallizes below its pour point, posing challenges for maintaining efficient crude oil transportation. Addressing wax deposition is essential for optimizing oil flow and meeting global energy demand. This article presents an innovative method for forecasting paraffin deposition in Kazakh crude oil, using its chemical composition and thermobaric conditions. The methodology encompassed data analysis, ASTM-standard laboratory tests, and computations employing modified equations for fusion properties calculation. Outcomes comprise computed temperatures, enthalpy, and heat capacity related to melting, along with revised correlations for melting and pour points specific to Kazakh crude oils. The melting point correlation was modified to fit the properties of Kazakh crude oils, resulting in standard deviation of 0.55 %. Computed pour points for hydrocarbons improved by 17 % respectively. As a result of the research a novel software tool was developed and evaluated, highlighting the project’s contribution in providing an adjusted thermodynamic model for paraffin deposition forecasting. Comparisons between the developed software, PVTSim, and field data showed the wax appearance temperature (WAT) predictions closely aligned, with 0.74 % of error. This numerical tool shows potential in predicting wax deposition, thus aiding in the planning of oil production and refining processes in Kazakhstan. The importance of this work extends to its potential economic impact on companies and the nation, as well as its environmental benefits by facilitating eco-friendly planning of oil production facilities. Future research could expand on these findings to further enhance predictive models of paraffin precipitation across diverse conditions
31 August 2023 in Eastern-European Journal of Enterprise Technologies
Deposition of wax on the pipe walls is one of the complex flow assurance problems that causes a decrease and complete blockage of oil production rates by reducing the cross-sectional area of flow in the pipelines. In addition, surface facilities require higher energy consumption and failure of facilities due to wax plugging. Effective design of oil recovery processes requires an adequate prediction of the thermodynamic conditions in which wax can precipitate from crude oil, depending on the pressure, temperature, and composition of the oil. In this paper, the modified melting and pour point temperatures were presented based on the fluid description. Other fusion properties such as the enthalpy of fusion, the solid-state transition enthalpies, and the heat capacity of fusion have been calculated to modify the multi-solid model for predicting wax deposition. The proposed modified equations for melting and pour point temperatures were showing reliable agreement with experimental data based on SARA analysis and demonstrated more accurate results compare to literature data. In order to justify the proposed model, the comparative approach has been implemented between literature, experimental, and data obtained based on proposed solutions. The detailed description of the Republic of Kazakhstan’s (RoK) oil fields, components from C1 up to C36+ has been used during this research and the most crucial components which tend to form wax precipitation from C15H32 to C20H42 were plotted, which showed an increasing accuracy of 11 % for melting point temperature and 7 % for pour point temperature compared to literature data. As a result, the proposed modified solutions for fusion properties demonstrated good agreement with literature and obtained results of modifications can be used for further research on Multi solid model of wax precipitation
Despite the half-century history of prospecting, the geological and geophysical knowledge of the Shu-Sarysu basin does not exceed 50%. At the same time, the Tasbulak graben remains the most unstudied. From 1941 to 1969 Regional and exploratory aeromagnetic surveys using Z-aerial magnetometers and fluxgate magnetometers at scales of 1:500,000-1:100,000 covered the areas of the western, northwestern and partially central parts of the Shu-Sarysu depression. From 1969 to the present, up to 70% of the area of the Shu-Sarysu depression has been covered with high-precision surveys using proton, fluxgate and quantum aeromagnetometers on a scale of 1:50,000-1:25,000. In fact, the entire territory of the Shu-Sarysu depression is covered by areal gravimetric surveys on a scale of 1:200,000, scales of 1:50,000-1:100,000 - about 70-75% of the area. In the west and southeast of this depression, individual areas were worked out by detailed surveying on a scale of 1:25,000. Over the entire period of satellite surveys (from 1972 to the present), a significant archive of high, medium and low-resolution images has been accumulated. Seismic exploration of the territory of the Tasbulak graben using the CDP and CDP methods was carried out in the period from 1968 to 1993. Seismic exploration using the CDP - 3D method was not carried out. With a total area of the basin of more than 150 thousand square kilometers, the degree of its drilling exploration is extremely low (about 1 well per 375-475 square kilometers). The degree of study of the Tasbulak graben is even less. As a result of prospecting and exploration work, 12 gas and gas condensate deposits were identified, including: 6 in the Moyynkum graben, 3 in the Kokpansor graben and 3 on the Talas uplift (helium). The totality of geophysical work carried out within the Tasbulak graben indicates a premature cessation of oil and gas exploration in the region and the need for detailed work to verify the presence of more complex structures and their reservoir properties.