Research reports reveal the importance of applying various substances to enhance extra-heavy crude oil pipeline transportation. During the crude oil conduction process, shearing occurs in the equipment and pipe accessories, producing a water-in-crude emulsion associated with forming a rigid film by adsorbing natural surfactant molecules in the droplets water, leading to increased Viscosity. This study presents the effect of a flow enhancer (FE) on the behavior of the Viscosity of an extra heavy crude oil (EHCO) and in emulsions formed with 5% and 10% water (W). The results revealed the effectiveness of the 1%, 3%, and 5% flow enhancer in lowering the Viscosity and presenting a Newtonian flow behavior which will help reduce the cost of heat treatment during the transportation of crude oil through the pipeline.
Chitosan films were used to remove heavy oil from connate water, deionized water, and seawater. In this research, chitosan–starch films were modified with natural extracts from cranberry, blueberry, beetroot, pomegranate, oregano, pitaya, and grape. These biodegradable, low-cost, eco-friendly materials show an important oil sorption capacity from different water conditions. It was observed that the sorption capacity has a clear correlation with the extract type, quantity, and water pH. In order to understand the physical and chemical properties of the films, they were analyzed according to their apparent density, water content, solubility, and swelling degree by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), gas chromatography–mass spectroscopy (GC–MS), and the determination of surface area using the Brunauer Emmett Teller (BET) method. The results indicate that chitosan–starch films modified with natural extracts can be successfully applied for environmental issues such as oil spill remedy.
The construction industry commonly uses steel-reinforced concrete despite the high levels of pollution in its production process. In this research, it was studied the dossing effect of nopal mucilage and Ixtle fiber as additives for the enhancement of concrete’s mechanical properties: compression strength, flexural strength, heat transfer coefficient, ultrasonic pulse rate, ED-XRF, and roughness by fractal dimension analysis. It was found a remarkable improvement in mechanical properties when both natural additives are used. It was observed an increase of potassium and calcium ions concentration after additive dosing. This behavior determines the suitability of the blend for its application in the engineering and construction industry to reduce cement or steel use.
The most complex components in heavy crude oils tend to form aggregates that constitute the dispersed phase in these fluids, showing the high viscosity values that characterize them. Water-in-oil (W/O) emulsions are affected by the presence and concentration of this phase in crude oil. In this paper, a theoretical study based on computational chemistry was carried out to determine the molecular interaction energies between paraffin–asphaltenes–water and four surfactant molecules to predict their effect in W/O emulsions and the theoretical influence on the pressure drop behavior for fluids that move through porous media. The mathematical model determined a typical behavior of the fluid when the parameters of the system are changed (pore size, particle size, dispersed phase fraction in the fluid, and stratified fluid) and the viscosity model determined that two of the surfactant molecules are suitable for applications in the destabilization of W/O emulsions. Therefore, an experimental study must be set to determine the feasibility of the methodology and mathematical model displayed in this work.