Lihui Ren

Dr. Lihui Ren


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 February 2020 in Vehicle System Dynamics
Verified
Journal Article
Closed access
STShiqiao Tian
Shiqiao Tian
XLXiangping Luo
Xiangping Luo
LRLihui Ren
Lihui Ren
CXChunyu Xiao
Chunyu Xiao
Active radial technology can effectively improve the curving performance of rail vehicles. The curvature of track is the key parameter of active radial system. In order to acquire this parameter in real time, a new method of curvature measurement based on secondary suspension rotation angle sensing is proposed in this paper. It is proved that this scheme can measure the curvature with small error and high synchronisation by theoretical deduction and simulation. Then, based on the curvature measurement scheme, an active radial system for rail vehicles is proposed, with emphasis on the design of an integrated device for wheelset constraints and actuator. Subsequently, the physical model of the actuator is established, and its dynamic response characteristics under typical working conditions are determined. Finally, the effect of the active radial technology of railway vehicles based on secondary suspension rotation angle sensing is analysed by the whole vehicle dynamic model with active radial function. The results show that the curvature measurement scheme is feasible, the curving performance of a rail vehicle under active radial control is improved significantly, and the thrust of the actuator is low. The research results can provide an engineering reference for real-time curvature measurements and active radial systems.

19 April 2022 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
HLHan Leng
Han Leng
LRLihui Ren
Lihui Ren
Yuanjin JiYuanjin Ji
Yuanjin Ji
The virtual track train (VTT) is a new type of urban transit system with all-wheel active steering technology utilized to make the long combination vehicle run along the planned route (virtual track) like railway vehicles along physical track. This paper proposed a scalable cascade modular path following control strategy for the newly designed gantry virtual track train (G-VTT) based on preview & tracking controller, focusing on the lateral control for low-speed turning manoeuvre. The mathematical characteristics of the 2-norm was utilized to establish a local tracking objective function (LTOF) to find the optimal lateral acceleration (OLA) of the tracking point in the preview window and calculate the optimal wheel steering angle (WSA) to achieve the optimal local trajectory. Considering the lag time T d , the yaw stability and path following ability of the vehicle are contradictory in some cases, so the damping adjustment factor λ was proposed to optimize the damping characteristics and the time-delay stability factor ξ was proposed to evaluate the time-delay stability. The influence of the key parameters, preview time T p , T d , ξ and λ , on the stability and following ability were analyzed by frequency domain analysis method, and the optimal region of ξ and λ was obtained to instruct the configuration of λ and T p . Finally, steady-state and dynamic forward predictive models were proposed to compensate for the oscillation caused by the lag time. The effectiveness of the proposed control strategy, forward predictive models and the configuration method of λ and T p were verified by theoretical analysis and numerical simulation.

15 February 2018 in Vehicle System Dynamics
Verified
Journal Article
Closed access
YJYuanjin Ji
Yuanjin Ji
LRLihui Ren
Lihui Ren
JZJinsong Zhou
Jinsong Zhou
The source of torque ripple in a permanent-magnet synchronous motor was analysed. Based on the feedback of the rotating speed difference between the left and right wheels, the error value of torque ripple in an in-wheel motor was calculated. Next, a simulation model of active steering control of an independently rotating wheel (IRW) in an in-wheel motor was developed to investigate effects of torque ripple. The relationship between the accuracy of active steering control of an IRW in an in-wheel motor and wheel/rail profile was derived, and then the boundary conditions of active steering control were obtained. Finally, a method was proposed to improve the active steering control of an IRW by optimising the tread.

18 June 2019 in Vehicle System Dynamics
Verified
Journal Article
Closed access
HLHan Leng
Han Leng
LRLihui Ren
Lihui Ren
YJYuanjin Ji
Yuanjin Ji
YHYoupei Huang
Youpei Huang
The bogies of the Hitachi and Bombardier straddle-type monorail vehicles could not be in the radial state on the circular curve because of the constraints of their own structure or secondary suspension system. Therefore, a large load always existed on the guiding wheels, restricting the curve negotiation speed of the vehicle. Taking this as the starting point, this study aimed to propose a newly designed bogie, called the automatic radial coupled-bogie (ARC-bogie). The theoretical model of linear steady-state curve negotiation of the ARC-bogie was established to analyse the passive radial adjustment mechanism of the ARC-bogie, and the calculation method for the optimal coupled parameters required for achieving the radial state was proposed. To validate the theoretical model, the dynamic performance of the ARC-bogie and the influence of coupled parameters were analysed by dynamic simulation. The result showed that the coupled rotary stiffness could make the ARC-bogie achieve the radial state automatically on the circular curve under reasonable matching between the secondary suspension system and the coupling mechanism. Moreover, the maximum radial force of the guiding wheels decreased obviously, and the curve negotiation safety of the vehicle improved remarkably. Finally, a scheme for the coupling mechanism of ARC-bogie was proposed.

15 January 2018 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Verified
Journal Article
Closed access
Yuanjin JiYuanjin Ji
Yuanjin Ji
LRLihui Ren
Lihui Ren
Straddling monorail vehicles are a new rail transportation mode in which the bearing, running, and guiding rely on rubber tyre running gears. Since the lateral span of the running wheel is small, stabilizing wheels are added to enhance the anti-overturning capacity, which is influenced by the contact between the stability wheels and track beam. If one stabilizing wheel loses contact with the track beam, the tendency to overturn increases significantly. To ensure the straddling monorail vehicle has a stable anti-overturning capacity, an initial preload pressure is applied to the all stabilizing wheels and guiding wheels. The specific preload pressure of the stabilizing and guiding wheels is a unique issue of straddling monorail vehicles. This paper deduced a flexible coefficient formula of straddling monorail vehicles, validated the accuracy of the flexible coefficient formula based on dynamics simulations, and discussed the correlation between the flexibility coefficient and stabilizing wheel contact conditions. According to the variation regularity of the anti-overturning capacity of straddling monorail vehicles, the concept of vehicle critical roll angle was proposed. The calculation formula of the critical roll angle of straddling monorail vehicles was determined, and its accuracy was validated by dynamics simulations. Based on the above fundamentals, a functional relationship between the critical roll angle and stabilizing wheel preload pressure was derived. This paper proposed that the value of stabilizing wheel preload pressure should be reasonably determined according to the critical roll angle and discussed the maximum and minimum speed limit of curve negotiating.

5 April 2022 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Verified
Journal Article
Closed access
HLHan Leng
Han Leng
LRLihui Ren
Lihui Ren
Yuanjin JiYuanjin Ji
Yuanjin Ji
This study aimed to propose a gantry virtual track train (G-VTT) architecture and investigate the path-tracking control of it. Based on the decoupling control theory, the concept and judgment criterion of the path-tracking independence of the G-VTT was proposed to provide a method to analyzing the compatibility between motion control and mechanical architecture, and instructing the design of the architecture of the G-VTT that could realize autonomous path-tracking with simple control strategy. The controllability and observability of the path-tracking control system were discussed from the perspective of vehicle kinematics and the decouplibility of each tracking point's lateral motion and the path-tracking independence of the vehicle was proved. The distributed virtual driving (DVD) model based on self-adaptive preview PID algorithm was proposed to achieve independent path-tracking of each axle. This model consists of two parts: forward preview model based on the fractional calculus theory simulating the driver's visual field and the parameter self-tuning PID controller based on variable universe fuzzy control theory (VUF-PID controller). The effectiveness and adaptability of the DVD model were verified by co-simulation test. The results show that the VUF-PID controller has an excellent control performance and could realize the self-tuning of PID parameters effectively and could adapt to the noticeable hysteresis effect with the forward preview model introduced. Moreover, the VUF-PID controller could significantly improve the curve-passing stability of the G-VTT, and exhibits excellent adaptability to the traveling speed, curve radius, and vehicle payload. Even when the train travels under an adverse operating condition with lateral acceleration about 3.2m/s2, the maximum tracking error could still be kept below ±0.02 m.