19 April 2022 in IEEE Transactions on Vehicular Technology
The virtual track train (VTT) is a new type of urban transit system with all-wheel active steering technology utilized to make the long combination vehicle run along the planned route (virtual track) like railway vehicles along physical track. This paper proposed a scalable cascade modular path following control strategy for the newly designed gantry virtual track train (G-VTT) based on preview & tracking controller, focusing on the lateral control for low-speed turning manoeuvre. The mathematical characteristics of the 2-norm was utilized to establish a local tracking objective function (LTOF) to find the optimal lateral acceleration (OLA) of the tracking point in the preview window and calculate the optimal wheel steering angle (WSA) to achieve the optimal local trajectory. Considering the lag time T d , the yaw stability and path following ability of the vehicle are contradictory in some cases, so the damping adjustment factor λ was proposed to optimize the damping characteristics and the time-delay stability factor ξ was proposed to evaluate the time-delay stability. The influence of the key parameters, preview time T p , T d , ξ and λ , on the stability and following ability were analyzed by frequency domain analysis method, and the optimal region of ξ and λ was obtained to instruct the configuration of λ and T p . Finally, steady-state and dynamic forward predictive models were proposed to compensate for the oscillation caused by the lag time. The effectiveness of the proposed control strategy, forward predictive models and the configuration method of λ and T p were verified by theoretical analysis and numerical simulation.
18 June 2019 in Vehicle System Dynamics
The bogies of the Hitachi and Bombardier straddle-type monorail vehicles could not be in the radial state on the circular curve because of the constraints of their own structure or secondary suspension system. Therefore, a large load always existed on the guiding wheels, restricting the curve negotiation speed of the vehicle. Taking this as the starting point, this study aimed to propose a newly designed bogie, called the automatic radial coupled-bogie (ARC-bogie). The theoretical model of linear steady-state curve negotiation of the ARC-bogie was established to analyse the passive radial adjustment mechanism of the ARC-bogie, and the calculation method for the optimal coupled parameters required for achieving the radial state was proposed. To validate the theoretical model, the dynamic performance of the ARC-bogie and the influence of coupled parameters were analysed by dynamic simulation. The result showed that the coupled rotary stiffness could make the ARC-bogie achieve the radial state automatically on the circular curve under reasonable matching between the secondary suspension system and the coupling mechanism. Moreover, the maximum radial force of the guiding wheels decreased obviously, and the curve negotiation safety of the vehicle improved remarkably. Finally, a scheme for the coupling mechanism of ARC-bogie was proposed.
5 April 2022 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
This study aimed to propose a gantry virtual track train (G-VTT) architecture and investigate the path-tracking control of it. Based on the decoupling control theory, the concept and judgment criterion of the path-tracking independence of the G-VTT was proposed to provide a method to analyzing the compatibility between motion control and mechanical architecture, and instructing the design of the architecture of the G-VTT that could realize autonomous path-tracking with simple control strategy. The controllability and observability of the path-tracking control system were discussed from the perspective of vehicle kinematics and the decouplibility of each tracking point's lateral motion and the path-tracking independence of the vehicle was proved. The distributed virtual driving (DVD) model based on self-adaptive preview PID algorithm was proposed to achieve independent path-tracking of each axle. This model consists of two parts: forward preview model based on the fractional calculus theory simulating the driver's visual field and the parameter self-tuning PID controller based on variable universe fuzzy control theory (VUF-PID controller). The effectiveness and adaptability of the DVD model were verified by co-simulation test. The results show that the VUF-PID controller has an excellent control performance and could realize the self-tuning of PID parameters effectively and could adapt to the noticeable hysteresis effect with the forward preview model introduced. Moreover, the VUF-PID controller could significantly improve the curve-passing stability of the G-VTT, and exhibits excellent adaptability to the traveling speed, curve radius, and vehicle payload. Even when the train travels under an adverse operating condition with lateral acceleration about 3.2m/s2, the maximum tracking error could still be kept below ±0.02 m.
31 July 2023 in IEEE Transactions on Vehicular Technology
Active steering control can significantly improve the curving performance of rail vehicles. However, it is constrained by the traction and braking of bogie. In this study, methods for optimizing and distributing active steering control quantities under constrained conditions are investigated. First, the wear number of the wheelset is set as the objective function. A controller is developed in the control layer based on a linearized bogie model with the wear number as the cost function using the model predictive control method. Then, the system state is observed using a Kalman filter with actuator feedback; the wheelset force state is also estimated using the actuator feedback. Subsequently, the optimum wheelset yaw angle under the constraints is solved. In the distribution layer, the spread of actuator displacements under traction and braking conditions is achieved by combining the longitudinal force coordination equations for the wheelset. The simulation results showed that the full utilization of the overdrive characteristics of the two coaxial actuators enabled the redistribution of actuator displacement commands under traction and braking conditions without reducing steering efficiency. Moreover, the maximum load on the actuators was effectively reduced. Finally, the parametric robustness of the controller was examined. The results showed that the controller and observer had good parametric robustness owing to the attitude stability of the bogie after active steering control was implemented.
20 August 2023 in Vehicle System Dynamics
26 December 2023 in IEEE Transactions on Vehicular Technology
Active steering control significantly improves the curving performance of rail vehicles. However, failures can occur in any part of the active control system. As failure in an actuator can directly affect the running attitude of the bogie, fault-tolerant control for such failures is particularly important. In this study, a fault-tolerant control method is proposed based on the classical active steering control structure, where each axle is equipped with two actuators. First, the optimal yaw angles of the wheelset under constraints are obtained in the control layer; then, the performance index reflecting the allocation and actual implementation effects is introduced in the allocation layer. Subsequently, the fault-tolerant control effect is analyzed for four typical fault cases: self-lock, back to zero, cutoff, and abnormal action. The results show that compared to the traditional geometric control method, the fault-tolerant control method not only maintains the steering control effect under fault cases but also ensures the running safety of the bogie after an actuator failure. Next, the weights of the cost functions in the allocation layer are analyzed; it is recommended that the weight for allocation effect should not be smaller than 0.1, as it can affect the redistribution transition process. Finally, it is proved that the controller has good parametric robustness. The results can be used as a reference for fault-tolerant control of active steering systems.