Robert Rimpl

Mr. Robert Rimpl

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 July 2025 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
GEGökhan Ertugrul
Gökhan Ertugrul
AHAndre Hälsig
Andre Hälsig
RRRobert Rimpl
Robert Rimpl
Jonas HenselJonas Hensel
Jonas Hensel
SHSebastian Härtel
Sebastian Härtel
The paper proposes a novel approach for determining multiple heat source parameters to achieve the necessary accuracy in the numerical prediction for a parallel tandem plasma transferred arc process. An artificial neural network (ANN) approach as a supervised learning–based artificial intelligence (AI) was used to model the complex relationship between heat distribution and tandem/dual heat source parameters based on finite element analysis (FEA). This study presents the first ANN-assisted numerical simulation for multiple heat source optimization of the tandem plasma transferred arc process. The model demonstrated high accuracy in predicting and calibrating the tandem heat source parameters, based on systematic simulation trials of the tandem plasma transferred arc welding. The results of the tandem heat source determined by ANN-assisted FEA were verified using experimental data on melt pool size and substrate distortion. This verification considered metrics such as penetration width, penetration depth, melt pool length, melt pool half-width, and the absolute distortion (measured as the difference between minimum and maximum displacement), with relative errors of 7.0%, 7.6%, 0.4%, 1.9%, and 9.7%, respectively.

15 July 2025 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
GEGökhan Ertugrul
Gökhan Ertugrul
AHAndre Hälsig
Andre Hälsig
RRRobert Rimpl
Robert Rimpl
Jonas HenselJonas Hensel
Jonas Hensel
SHSebastian Härtel
Sebastian Härtel

10 April 2026 in Welding in the World
Verified
Journal Article
Open access
PDF file
RRRobert Rimpl
Robert Rimpl
Kevin HoeferKevin Hoefer
Kevin Hoefer
Jonas HenselJonas Hensel
Jonas Hensel
This work investigates the in situ production of the Fe64Ni36 alloy (Invar 36) using a powder-based Directed Energy Deposition process with a plasma arc as energy source (DED-Arc). The alloy composition is achieved during fabrication by melting elemental iron and nickel powders directly in the plasma arc. The study focuses on the resulting microstructure, chemical composition, mechanical and thermophysical properties, with comparisons to conventional material. Results confirm a homogeneous alloy composition throughout the additively manufactured structure, with an average of 63.5 wt.% Fe and 36.5 wt.% Ni, validating the in situ alloying approach. Thermophysical and mechanical testing demonstrated that the characteristic low coefficient of thermal expansion (CTE) up to 200 °C and tensile strength is partly comparable to conventionally manufactured Invar 36. However, cross-sectional analysis revealed occasional unmolten iron particles positioned between layers, which reduced tensile strength in the build direction. To address this, an improved parameter set and an adapted powder-feeding strategy were developed. These modifications resulted in complete melting and mixing of the elemental powders, eliminating particle residues. The resulting mechanical behavior showed further improvement in the critical build up direction, despite this, interlayer bonding remained fully intact. Overall, the results confirm the feasibility of in situ alloying using elemental powders in the DED-Arc process and demonstrate that appropriate process tuning enables fully homogeneous alloy formation. This approach provides a flexible and cost-efficient pathway for on-demand alloy development and can be extended to more complex systems.

10 October 2025 in Journal of Materials Engineering and Performance
Verified
Journal Article
Open access
PDF file
RRRobert Rimpl
Robert Rimpl
Kevin HoeferKevin Hoefer
Kevin Hoefer
AHAndre Hälsig
Andre Hälsig
Jonas HenselJonas Hensel
Jonas Hensel
Functionally graded additive manufacturing (FGAM) enables the production of components with locally defined material transitions, allowing mechanical properties to be adapted to specific load conditions for improved performance and material efficiency. This study explores the applicability of the Schaeffler diagram as a predictive tool for evaluating microstructural transitions and resulting properties in FGAM using powder-based Directed Energy Deposition with a plasma arc (DED-Arc). A material system of 42CrMo4 and Alloy 625 was selected to analyze phase transitions and property changes within graded structures. Based on calculated nickel and chromium equivalents, theoretical transition zones were identified where significant property variations were expected. Graded wall structures were produced using a tandem DED-Arc process, gradually transitioning from 100% 42CrMo4 to a 70/30% mix with Alloy 625. Microstructural development was analyzed via optical microscopy, hardness testing, and energy-dispersive x-ray spectroscopy (EDX). The results revealed three distinct hardness regions, with abrupt changes aligning closely with phase boundaries predicted by the Schaeffler diagram. Maximum hardness (580 HV1) was observed at 10% Alloy 625, attributed to precipitates containing niobium, molybdenum, and chromium. These findings underscore the diagram’s utility in identifying critical transition zones and reducing experimental effort in material evaluation.