Stefano Felicioni

Dr. Stefano Felicioni

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 August 2024 in Metals
Verified
Journal Article
Open access
PDF file
GTGeethapriyan Thangamani
Geethapriyan Thangamani
SFStefano Felicioni
Stefano Felicioni
Elisa PadovanoElisa Padovano
Elisa Padovano
SBSara Biamino
Sara Biamino
Mariangela LombardiMariangela Lombardi
Mariangela Lombardi
FBFederica Bondioli
Federica Bondioli
In recent years, additive manufacturing (AM) has played a significant role in various fashion industries, especially the textile and jewelry manufacturing sectors. This review article delves deeply into the wide range of methods and materials used to make intricately designed jewelry fabrication using the additive manufacturing (AM) process. The Laser Powder Bed Fusion (L-PBF) process is examined for its suitability in achieving complex design and structural integrity in jewelry fabrication even with respect to powder metallurgy methods. Moreover, the review explores the use of precious materials, such as gold, silver, copper, platinum, and their alloys in additive manufacturing. Processing precious materials is challenging due to their high reflectivity and thermal conductivity, which results in poor densification and mechanical properties. To address this issue, the review article proposes three different strategies: (i) adding alloying elements, (ii) coating powder particles, and (iii) using low-wavelength lasers (green or blue). Finally, this review examines crucial post-processing techniques to improve surface quality, robustness, and attractiveness. To conclude, this review emphasizes the potential of combining additive manufacturing (AM) with traditional craftsmanship for creating jewelry, exploring the potential future directions and developments in the field of additive manufacturing (AM) for jewelry fabrication.

20 May 2024 in Science and Technology of Advanced Materials
Verified
Journal Article
Open access
SFStefano Felicioni
Stefano Felicioni
Alberta  AversaAlberta Aversa
Alberta Aversa
ELErica Librera
Erica Librera
FBFederica Bondioli
Federica Bondioli
Paolo FinoPaolo Fino
Paolo Fino
This current study investigates the effect of Direct Energy Deposition (DED) process conditions on the properties and microstructure of M300 maraging steel samples. The investigation centers on two key factors: laser power and deposition environment. The microstructure of this tool steel is analyzed by computing the Primary Cellular Arm Spacing. The findings revealed a significant influence of both inert atmosphere and laser power on cooling conditions. These different cooling rates influence the phase content as demonstrated by X-Ray Diffraction and Electron Backscatter Diffraction measurements. It was demonstrated the presence of different content of residual austenite at cell boundaries. These distinct microstructural features caused variations in the hardness values of the printed samples. Furthermore, a direct aging heat treatment was implemented, that was chosen from Differential Scanning Calorimetry measurements results. This heat treatment proves effective in achieving consistent hardness increases and eliminated the differences among samples built in different process conditions. This outcome suggests the possibility of selecting the most economically viable DED parameters for optimal results.

25 February 2026 in Materials & Design
Verified
Journal Article
Open access
SFStefano Felicioni
Stefano Felicioni
ACAdrian Barbosa Cantu
Adrian Barbosa Cantu
EPElisa Padovano
Elisa Padovano
AVAngela Veiga
Angela Veiga
Miren AristizabalMiren Aristizabal
Miren Aristizabal
FBFederica Bondioli
Federica Bondioli

25 November 2025 in Metals
Verified
Journal Article
Open access
PDF file
SFStefano Felicioni
Stefano Felicioni
Josip VincicJosip Vincic
Josip Vincic
AZAnnalisa Zacco
Annalisa Zacco
Alberta  AversaAlberta Aversa
Alberta Aversa
Paolo FinoPaolo Fino
Paolo Fino
FBFederica Bondioli
Federica Bondioli
In the aerospace sector, integrating advanced materials with high mechanical capabilities represents the forefront of material science, especially in the field of rocketry. Bimetallic structures are increasingly used in aerospace applications due to their combination of high strength-to-weight ratio, thermal conductivity, and corrosion resistance. Among these, Inconel-copper (In718-Cu) systems are particularly promising, although large differences in thermophysical and mechanical properties between the two materials can induce residual stresses, cracks, and other interfacial defects, requiring careful process control. This study evaluates the fabrication of In718-Cu structures through Direct Energy Deposition (DED), in which In718 was deposited onto a copper substrate using an innovative deposition strategy. Interface quality and microstructure were characterized by SEM/EDS and X-ray diffraction, whereas the mechanical properties were evaluated by nanoindentation, indentation creep, and tensile testing. The results showed that crack-free samples can be achieved, with strong diffusion bonding at the interface and efficient precipitation strengthening on the copper side already in the as-built condition. A uniform distribution of precipitates and consistent penetration depth were also observed, confirming the effectiveness of the deposition strategy for producing reliable In718-Cu components.

10 June 2026 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
SFStefano Felicioni
Stefano Felicioni
MCMatteo Crachi
Matteo Crachi
DLDelio Lusicini
Delio Lusicini
RSRaffaella Sesana
Raffaella Sesana
MPMarco Pizzarelli
Marco Pizzarelli
FBFederica Bondioli
Federica Bondioli

14 May 2025 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
SFStefano Felicioni
Stefano Felicioni
Alberta  AversaAlberta Aversa
Alberta Aversa
ELErica Librera
Erica Librera
Mariangela LombardiMariangela Lombardi
Mariangela Lombardi
FBFederica Bondioli
Federica Bondioli