Junjie Li

Junjie Li


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
JCJunhui Chen
Junhui Chen
YLYuan LI
Yuan LI
ZMZhongwei Meng
Zhongwei Meng
XFXiaoqiong Feng
Xiaoqiong Feng
JWJunjie Wang
Junjie Wang
Shuxiao WangShuxiao Wang
Shuxiao Wang
With the acceleration of urban construction, the pollutant emission of non-road mobile machinery such as construction machinery is becoming more and more prominent. In this paper, a portable emissions measurement system (PEMS) tested the emissions of eight different types of construction machinery under actual operating conditions and was used for idling, walking, and working under the different emission reduction techniques. The results showed that the pollutant emission of construction machinery is affected by the pollutant contribution of working conditions. According to different emission reduction techniques, the diesel oxidation catalyst (DOC) can reduce carbon monoxide (CO) by 41.6–94.8% and hydrocarbon (HC) by 92.7–95.1%, catalytic diesel particulate filter (CDPF) can reduce particulate matter (PM) by 87.1–99.5%, and selective catalytic reduction (SCR) using urea as a reducing agent can reduce nitrogen oxides (NOx) by 60.3% to 80.5%. Copper-based SCR is better than vanadium-based SCR in NOx reduction. In addition, the study found that when the enhanced 3DOC + CDPF emission reduction technique is used on forklifts, DOC has a “low-temperature saturation effect”, which will reduce the emission reduction effect of CO and THC. The use of Burner + DOC + CDPF emission reduction techniques and fuel injection heating process will increase CO’s emission factors by 3.2–3.5 and 4.4–6.7 times compared with the actual operating conditions.

11 July 2024 in Catalysts
Verified
Journal Article
Open access
PDF file
JLJunjie Li
Junjie Li
WENJING CHENWENJING CHEN
WENJING CHEN
CXCheng-Hua Xu
Cheng-Hua Xu
XHXiaoxiao Hou
Xiaoxiao Hou
XHXIAODONG HU
XIAODONG HU
This study presents a series of Cu-Mn/Al2O3 catalysts prepared by the polyol method to improve the toluene combustion process. The catalytic activity evaluation results showed that the different polyols have a great influence on catalyst activity, in which the catalyst prepared with glycerol through a hydrothermal reaction at 90 °C displayed the highest catalytic activity. The lowest T90 and T50 values could be achieved by CMA-GL-90 with 260 and 237 °C, respectively. Moreover, the XRD and BET results showed that the hydrothermal treatment was more favorable with Cu-Mn crystal formation, and an abundance of mesopores remained in all catalysts with a high specific surface area from 94.37 to 123.03 m2·g−1. The morphology analysis results by SEM and TEM indicated that employing glycerol coupled with hydrothermal treatment at 90 °C could enhance the formation of CuMn2O4 spinel. The toluene catalytic combustion mechanism of Cu-Mn/Al2O3 catalysts was discussed based on XPS and H2-TPR, and a high atomic ratio of Mn3+ could be obtained with 51.03%, and the ratio of Oads/Olatt also increased to 2.85 in CMA-GL-90. The increase in Mn3+ species and oxygen vacancies on the surface of catalysts exhibited excellent activity and stability for toluene combustion. These findings offer valuable insights for optimizing the design and application of Cu-Mn/Al2O3 catalysts in addressing the catalytic oxidation reactions of organic volatile compounds.

30 August 2025 in Agriculture
Verified
Journal Article
Open access
PDF file
XHXIAODONG HU
XIAODONG HU
DCDanyang Cao
Danyang Cao
JLJunjie Li
Junjie Li
WSWei Sun
Wei Sun
ZGZiyong Guo
Ziyong Guo
Jiaen ZhangJiaen Zhang
Jiaen Zhang
Near-surface ozone (O3) pollution has emerged as a growing threat to rice production in the Pearl River Delta (PRD), impairing photosynthesis, suppressing crop growth, and reducing yields. This study integrated long-term observational data with spatial crop distribution data and modeling approaches to assess O3-induced impacts on rice yields and associated economic losses across the PRD from 2015 to 2023. The results showed that annual average O3 concentrations during rice-growing periods increased from 41.3 to 66.0 μg/m3, with accumulated AOT40 values reaching 20.1 ppm·h. O3 exposure led to annual average rice yield losses of 10.8% ± 0.8%, including 9.3% for double-early rice and 12.3% for double-late rice. Absolute yield losses totaled approximately 333,000 tons per year, equivalent to the caloric needs of 2.69 million people, with economic losses exceeding CNY 844 million. Vulnerability hotspots were identified in Zhaoqing and Jiangmen, each suffering over 100,000 tons of annual losses. Scenario simulations indicated that a 20% reduction in ambient O3 could recover up to 54,700 tons annually. Future projections under RCP 2.6–8.5 suggested continued yield losses of 14,900 to 23,200 tons per year by 2050. Temporal adjustments to planting calendars may further mitigate these effects. This study highlights the urgent need for integrated mitigation strategies to enhance agricultural resilience in the face of ozone stress in industrialized delta regions.