The storage of natural gas in geological structures such as depleted fields, aquifers and salt caverns plays an important role in a gas supply system as it balances the fluctuation of gas demand and price. Hydraulic loss due to fluid flow through gas storage production equipment and an interfering effect from nonequal productivity index of storage wells may have an important influence on gas storage performance. An integrated mathematical model is developed based on underground gas storage facility production data. Using this model, the hydraulic loss is determined. A real test case that consists of a gas storage reservoir linked to the surface facility is analysed. The mathematical model uses an experimentally determined pressure drop coefficient in chokes. The base case scenario created using real gas storage facility data enables the achievement of a good history match with the given parameters of the gas storage reservoir. Using the history match simulation case as an initial scenario (a base case), two different scenarios are created to determine the injection and withdrawal performance of the gas storage field. The results indicate that the pressure drop in chokes, when fully open as a constraints in an underground gas storage facility, has a significant impact on gas storage operations and deliverability.

Varaždin County is rich in mineral resources, attracting considerable investor interest in opening new exploration areas and expanding existing exploitation fields. Since the economic value of mineral resources changes with market conditions, continuous professional assessment is required. Although the proposed methodological framework is broadly applicable to mineral resource management, this case study focuses on the exploitation of construction sand and gravel deposits in Varaždin County. In this way, it addresses the sustainability challenges characteristic of quarry operations rather than large-scale mining projects. The objective of this study was to develop and test a new method for quantifying sustainability indicators in the mineral resource management (spatial, resource-related, environmental, economic, and social sustainability—I_PREGS) and for calculating an aggregated composite index (AK_I) using a pilot project for construction sand and gravel. The research establishes a cause–effect relationship between quantified indicators (I_PREGS) and the newly established aggregated composite index (AK_I). Methodologically, the study applied multivariate analysis to questionnaire data, enabling the selection, weighting, and aggregation of indicators and the design of a conceptual framework for AK_I calculation. The resulting methodology provides an instrument for monitoring and improving sustainable mineral resource management, supporting the objectives of the circular economy. The findings highlight the potential of the AK_I to reduce systemic inefficiencies, guide policy development, and offer a transparent mechanism for assessing both implementation and effectiveness. This significantly improves the current state and strengthens the basis for evidence-based economic policy-making. The case study in Varaždin County further demonstrated that the AK_I not only reproduces administrative decisions with high consistency but also clarifies how applicants should proceed in cases of partial acceptance and how policymakers can interpret conflicting outcomes across different index variants.

In this paper, the authors elaborated on the conversion of excess electricity, generated from renewable energy sources by water electrolysis, into chemical energy and on its underground storing. Specifically, one of potential solutions...

Increasing the share of renewable energy sources (RESs) in the energy mix of countries is one of the main objectives of the energy transition in national economies, which must be established on circular economy principles. In the natural gas storage in geological structures (UGSs), natural gas is stored in a gas reservoir at high reservoir pressure. During a withdrawal cycle, the energy of the stored pressurised gas is irreversibly lost at the reduction station chokes. At the same time, there is a huge amount of produced reservoir water, which is waste and requires energy for underground disposal. The manuscript explores harnessing the exergy of the conventional UGS reduction process to generate electricity and produce hydrogen via electrolysis using reservoir-produced water. Such a model, which utilises sustainable energy sources within a circular economy framework, is the optimal approach to achieve a clean energy transition. Using an innovative integrated mathematical model based on real UGS production data, the study evaluated the application of a turboexpander (TE) for electricity generation and hydrogen production during a single gas withdrawal cycle. The simulation results showed potential to produce 70 tonnes of hydrogen per UGS withdrawal cycle utilising 700 m³ of produced field water. The analysis showed that hydrogen production was sensitive to gas flow changes through the pressure reduction station, underscoring the need for process optimisation to maximise hydrogen production. Furthermore, the paper considered the categorisation of this hydrogen as “green” as it was produced from the energy of pressurised gas, a carbon-free process.