Permanent magnet synchronous machines (PMSMs) have been widely used in various applications such as robotics, electric vehicles, and aerospace due to their fast dynamic response, high-power/torque density, and high efficiency. These features make them attractive candidates for aeronautical applications, where the weight and volume of onboard systems are critically important. This paper aims to provide an overview of recent developments in PMSMs. Key design considerations for aeronautical PMSMs across different applications are highlighted based on the analysis of industrial cases and research literature. Additionally, emerging techniques that are vital in enhancing the performance of aeronautical PMSMs are discussed.
31 January 2024 in IEEE Transactions on Industrial Electronics
This article focuses on analyzing and evaluating the demagnetization behavior of Halbach rotor permanent magnet synchronous machines. An indicator related to the dq -axis current namely I dmag representing the severity of the demagnetization is proposed based on the analysis of a finite-element (FE) model. The influence of transient symmetrical short-circuit (SSC) current is considered during the evaluation of the magnets’ magnetization status. Analysis based on the derived analytical solution proved that ignoring the magnetic saturation caused by the transient SSC current will cause significant inaccuracy in the calculation of I dmag . To improve the calculation efficiency and accuracy, a hybrid model combining the equivalent circuit model, several FE cases, and an analytical mapping model is proposed. The procedures for building the hybrid model are elaborated and its accuracy is verified by time-stepping FE analysis. The proposed model can complete the calculation of one case within 20 s whereas conventional FE analysis typically takes over 10 min. Finally, the accuracy of the FE model is verified by experiments on a manufactured prototype. With this proposed model, both the worst demagnetization scenario over the entire operating range and the maximum acceptable PM temperature at a given speed can be identified. The derived temperature boundary will be used to guide the cooling design of the machine.
29 September 2023 in IEEE Transactions on Transportation Electrification
Halbach magnet array is one of the most popular magnet pole configurations for high-speed permanent magnet synchronous machines (HSPMSMs) applications due to the reduced flux harmonics. However, the design and optimization of Halbach array configurations are usually time-consuming since both the magnetization direction and span angle of each magnet segment can be adjusted. To improve the optimization efficiency of this type of machine, this paper proposed an intuitive ultrafast semi-analytical optimization method with high accuracy to replace conventional time-stepping finite element (FE) analysis. Magnetostatic FE simulations are used to extract the look-up table (LUT) of the magnetic flux harmonics. The superposition property and the phase shifting property of the magnetic field of the Halbach magnet are verified. A 6s4p HSPMSM motor with the three-segment Halbach array rotor is used as an example to illustrate the advantage and effectiveness of the proposed semi-analytical method. Analytical expressions for the approximation of the Halbach magnet field are derived and the harmonic LUT-based multi-objective optimization is performed. The validity of the optimized cases is examined by both FEA and experimental tests.
Halbach magnet array has been widely used in high-speed permanent magnet synchronous machines (PMSM) due to the possibility of creating a highly sinusoidal air gap magnetic field. However, conventional Halbach arrays often adopt magnet segments with uniform thickness which limits the optimization space. In this paper, the Halbach array composed of magnet segments with nonuniform thicknesses is considered to further expand the optimization space. Both electromagnetic and mechanical analyses have been conducted, considering design parameters such as the span angle and thickness of the magnet segments. Characteristics including the fundamental air gap flux density, demagnetization status, and mechanical stress of the rotor are analyzed in detail. The conclusions obtained can be used as the design guidelines for the optimization of PMSM with a two-segment Halbach array.
26 December 2024 in IEEE Transactions on Industry Applications
Manufacturing tolerances usually result in additional cogging torque harmonics in surface-mounted permanent magnet synchronous motors (SPMSMs), which may lead to an increase in cogging torque. This paper establishes an analytical model for the cogging torque of SPMSMs using the complex permeance function and the energy method. With the aid of the analytical model, the origin of cogging torque harmonics under the influence of different types of tolerances is elucidated. Then, a field reconstruction method (FRM) is proposed to rapidly predict magnetic field variations in Halbach array SPMSMs due to magnet manufacturing tolerances. Based on FRM, a semi-analytical method is proposed for the fast evaluation of cogging torque considering manufacturing tolerances. The correctness of the analysis and the effectiveness of the semi-analytical method are verified through finite element analysis on a 6-slot/4-pole Halbach array SPMSM. Finally, the computational cost and application scenarios of the proposed method are discussed using two examples. The analysis is validated through testing on a prototype.
10 September 2024 in IEEE Transactions on Industry Applications
Accurate evaluation of eddy current losses (ECL) in permanent magnets is crucial for thermal design and operational safety in permanent magnet synchronous machines (PMSMs). In this paper, the composition of magnetic flux harmonics responsible for the ECL is characterized. A spoke-type interior PMSM fractional slot is used as an example to verify the obtained patterns. The influence of current harmonics on the ECL is further evaluated using the finite element method, based on which a simplified prediction model with only two coefficients for the evaluation of ECL in PMSMs is proposed. Finally, an efficient semi-analytical synthesis method based on a limited number of finite element cases has been proposed to consider the impact of high-frequency current harmonics on the ECL. The saturation of the iron core is taken care of by adopting the frozen permeability technique. The comparison of the ECL values and the calculation time under several operation conditions when adopting the conventional time-stepping finite element analysis and the proposed semi-analytical method validate the accuracy of the proposed one. It is shown that the proposed method has the potential to significantly reduce the time needed for the evaluation of ECL considering the influence of current harmonics.