Xiangpei Gu

Ms. Xiangpei Gu


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 July 2021 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
LSLinnan Sun
Linnan Sun
ZZZhuoran Zhang
Zhuoran Zhang
LYLi Yu
Li Yu
XGXiangpei Gu
Xiangpei Gu
HVHendrik Vansompel
Hendrik Vansompel
PSPeter Sergeant
Peter Sergeant
A hybrid excitation generator is proposed as a brushless solution for aircraft low-voltage dc power system applications. This topology distinguishes itself from the commonly used electrically excited generator in aircraft power systems because it features an open-circuit voltage without field current. This feature is an advantage, but it also includes a risk. As a too high open-circuit voltage has detrimental influences on the generation system, the limitation of this open-circuit voltage needs to be guaranteed at all times. The key design parameters, such as the slot–pole combination, stack length, and number of turns of the armature winding, are determined to make sure that generators meet the open-circuit voltage limitation. These key design parameters also influence the inductance characteristics of the generator and put consequences on the load characteristics thereby. Therefore, this article also analyzes the load and short-circuit characteristics of these hybrid excitation generators as a function of these parameters. Theoretical deduction and simulation are conducted to reveal the influence law of the parameters on the performance of the hybrid excitation generator under the limitation of open-circuit voltage. A 12300-r/min 12-kW prototype is developed. The experiments verify the analysis and show that the hybrid excitation generator is appropriate for aircraft applications.

11 February 2020 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
XGXiangpei Gu
Xiangpei Gu
ZZZhuoran Zhang
Zhuoran Zhang
LSLinnan Sun
Linnan Sun
LYLi Yu
Li Yu

27 July 2020 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
XGXiangpei Gu
Xiangpei Gu
ZZZhuoran Zhang
Zhuoran Zhang
LSLinnan Sun
Linnan Sun
LYLi Yu
Li Yu
The magnetic field enhancement characteristic of an axially parallel hybrid excitation generator (APHEG) is revealed and analyzed in this article. The APHEG consists of a permanent magnet machine part (PMMP), a flux modulation machine part (FMMP), and a diode rectifier. The magnetic fields of the two parts are interactional despite the independent flux paths, which provides the possibility to enhance the FMMP field at the expense of weakening the PMMP field. By taking advantage of that, the combination of the PMMP and FMMP can effectively boost the output power in the defined voltage-boost region as the weakening of the PMMP field is negligible. In addition, the magnetic field of the FMMP can be further enhanced by regulating the rotor shift angle. Based on the analysis of the phasor diagrams, it is found that the flux amplitudes and phase displacement angles of the two parts are mutually restrictive and decide the optimized rotor shift angle range of the APHEG. Finally, a prototype APHEG has been developed, and the experiments verify the phasor diagrams and simulation analysis.

31 January 2024 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
CLChendong Liao
Chendong Liao
ZZZhuoran Zhang
Zhuoran Zhang
XGXiangpei Gu
Xiangpei Gu
HLHanqi Li
Hanqi Li
JLJincai Li
Jincai Li
XXXuekun Xie
Xuekun Xie
This article focuses on analyzing and evaluating the demagnetization behavior of Halbach rotor permanent magnet synchronous machines. An indicator related to the dq -axis current namely I dmag representing the severity of the demagnetization is proposed based on the analysis of a finite-element (FE) model. The influence of transient symmetrical short-circuit (SSC) current is considered during the evaluation of the magnets’ magnetization status. Analysis based on the derived analytical solution proved that ignoring the magnetic saturation caused by the transient SSC current will cause significant inaccuracy in the calculation of I dmag . To improve the calculation efficiency and accuracy, a hybrid model combining the equivalent circuit model, several FE cases, and an analytical mapping model is proposed. The procedures for building the hybrid model are elaborated and its accuracy is verified by time-stepping FE analysis. The proposed model can complete the calculation of one case within 20 s whereas conventional FE analysis typically takes over 10 min. Finally, the accuracy of the FE model is verified by experiments on a manufactured prototype. With this proposed model, both the worst demagnetization scenario over the entire operating range and the maximum acceptable PM temperature at a given speed can be identified. The derived temperature boundary will be used to guide the cooling design of the machine.

21 May 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
LSLinnan Sun
Linnan Sun
ZZZhuoran Zhang
Zhuoran Zhang
XGXiangpei Gu
Xiangpei Gu
LYLi Yu
Li Yu
JLJincai Li
Jincai Li
A new hybrid excitation brushless DC generator (HEBLDCG) is comprised of the structure-paralleled permanent magnet machine part and flux modulation machine part (FMMP). The reactive power compensation effect of the HEBLDCG is illustrated and investigated in this paper. It is shown that the operation modes of the FMMP are influenced by both the field current and armature current. Based on this, three ranges in terms of the field current are divided. Three typical operation states representatively selected in the three ranges are defined as the power-balance state, compensator state, and short-circuit state, respectively. The short-circuit current can be diminished on account of the reactive power compensation effect. Furthermore, the analysis of the short-circuit characteristics shows that the short-circuit characteristic curve - short-circuit output current versus field current - is not a straight line due to the saturation of the d-axis flux path of the FMMP. And the HEBLDCG at -8A field current features the lowest total loss at the short-circuit state. At last, a prototype HEBLDCG is manufactured and the experiments validate the simulations.

17 June 2020 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
LSLinnan Sun
Linnan Sun
ZZZhuoran Zhang
Zhuoran Zhang
XGXiangpei Gu
Xiangpei Gu
LYLi Yu
Li Yu
A hybrid excitation brushless DC generator (HEBLDCG) system, consisting of a main generator (MG) and an integrated exciter, is proposed and developed in this paper. The excitation sources types of the stand-alone generation system and corresponding characteristics of the sources types are summarized. In the target HEBLDCG system, the integrated exciter shares a flux path with the permanent magnet machine part (PMMP), which is a part of the MG, without extracting power from the output terminal or sacrificing the efficiency of the generation system. It is the reactive power in the PMMP that leads to these aforementioned advantages. Also, the basic design flowchart of the exciter is expounded upon, and the values of some parameters are discussed. The designed exciter meets the requirements of the field power of the MG for the whole speed range and under varying load conditions. Based on the well-designed exciter, the electromagnetic performance is analyzed in terms of its open-circuit and load performance. Furthermore, the reason why the output power of the MG is not reduced by the integrated exciter is analyzed. Finally, open-circuit and load experiments for the exciter are conducted, and the proposed excitation method is found appropriate for the HEBLDCG system.