This research aims to model system dynamics for mixed traffic flow consisting of Connected and Automated Vehicles (CAVs) and Human-driven Vehicles (HVs). It quantifies the impact of CAVs’ speed change on the overall traffic state on a real-time basis. The model describes the impedance of CAVs’ speed reduction on traffic flow and considers the impact of potential additional lane change induced by the speed reduction. To validate the effectiveness of the proposed model, a VISSIM based microscopic simulation evaluation is performed. The results confirm that the accuracy of the proposed model is generally over 80% with the CAVs’ speed reduction constrained within 20 km/h. Sensitivity analysis is conducted in terms of various CAV penetration rates and congestion levels. The proposed model demonstrates consistently good performance across all CAV penetration rates and congestion levels. A showcase is presented to show the effect of the system dynamics in active traffic management. The proposed model could serve as the foundation of CAV based traffic management applications, such as variable speed limit and speed harmonization.
3 July 2023 in IEEE Transactions on Intelligent Transportation Systems
This paper proposed a speed harmonization controller for partially connected and automated traffic. It regulates the flow rate of the entire traffic by adjusting only the target cruising speed of Connected and Automated Vehicles (CAVs). The proposed controller bears the following features: i) compatibility enabled with partially connected and automated traffic consisting of CAVs and Human-driven Vehicles (HVs); ii) stability ensured for the traffic system under control; iii) precision guaranteed for the demand management on a multi-lane road with the help of a small portion of vehicles. To evaluate the proposed controller, a microscopic simulation evaluation was conducted. Results confirm that the control accuracy of the proposed controller is generally over 80% across all CAV Penetration Rates, demand levels (v/c ratio) and target demand drops (within 20%). A case study is presented to demonstrate the benefit of applying the proposed controller on a bottleneck. By preventing the onset of a breakdown and, along with it, a capacity drop, the proposed controller is able to increase the flow rate by 6%, reduce the number of stops by up to 90% and delay by approximately 5%.
9 October 2023 in Journal of Advanced Transportation
This paper proposed an eco-speed harmonization method at intersections. It is able to reduce carbon emissions by controlling partially connected and automated traffic and signal timing. It has the following features: (i) traffic emission reduction enhancement at various demand levels; (ii) traffic emission achievement while improving the mobility of entire traffic at intersections; (iii) enhanced traffic emission reduction with the help of a small portion of connected and automated vehicles; and (iv) potential implementations in the near feature. To validate the effectiveness, the proposed method is evaluated against a state-of-the-art strategy. Sensitivity analysis is conducted under various demand levels and market penetration rates (MPRs) of connected and automated vehicles (CAVs). The result shows that the proposed method outperforms and has the benefits of traffic emission reduction, throughput improvement, and stop frequency reduction. The proposed method demonstrates consistent performance across all demand levels and CAVs’ MPR. The proposed approach can achieve a reduction in emissions ranging from 4% to 61%, an average increase in throughput of around 14.91%, and a decrease in the stop frequency of at least 26%. This provides the foundation for future CAVs-based eco-approaching strategies.
This research proposes a dispatching method with taking advantage of the precise execution of Automated Intelligent Vehicles(AIV). It has the following features: (i)improving operational efficiency; (ii)reducing energy consumption; (iii)Taking advantage of the precise execution of AlVs; (iv)fast enough for potential real-time implementation. To evaluate the performance of the proposed method, a microscopic simulation is conducted. The proposed method is compared against the common-utilized baseline. Sensitivity analysis is conducted under various numbers of AIVs, containers, lengths of rolling horizons, and YCs distribution. The results show that the proposed method performs consistently with various numbers of AIVs, containers, lengths of rolling horizons, and YCs distribution. The operational efficiency is enhanced by up to 30%. The energy consumption is reduced by up to 21%. The solving time is less than 22 seconds for 500 containers. This proves that the proposed method is fast enough for potential real-time implementation.
This research proposed a system dynamics model of mixed flow consisting of Connected and Automated Vehicles (CAVs) and Human-driven Vehicles (HVs). It quantifies the impact of CAVs' speed change on traffic state. The model describes the impedance of CAVs' speed reduction on traffic flow and considers the impact of potential additional lane change induced by the speed reduction. A VISSIM based microscopic simulation evaluation is performed. The results confirm that the accuracy of the proposed model is over 80%. Sensitivity analysis was conducted in terms of CAV penetration rate and v/c ratio. The proposed model demonstrated a consistent performance across all CAV penetration rate as long as v/c ratio is above 0.14. The proposed model could serve as the foundation of CAV based traffic management applications, such as variable speed limit and speed harmonization.
This paper proposes a Traj ectory based Traffic Management (TTM) decision maker for connected and automated traffic. The goal is to enable active traffic management on a microscopic level with the help of Connected and Automated Vehicles (CAVs). The proposed decision maker bears the following features: i) enable real-time traffic demand management; ii) ensure control stability; iii) be potential for extension to partially connected and automated traffic. The proposed decision maker is evaluated on a freeway segment. The results demonstrate that the proposed method performs good control stability. It is revealed that the proposed decision maker can stabilize in 2 min.
About Me
Her research focuses on intelligent traffic control and management and terminal fleet dispatching for port operations.
Her research focuses on intelligent traffic control and management and terminal fleet dispatching for port operations.