Vashanti J Storr

Ms. Vashanti J Storr

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 August 2024 in Membranes
Verified
Journal Article
Open access
PDF file
FGFnu Gorky
Fnu Gorky
VSVashanti J Storr
Vashanti J Storr
GJGrace Jones
Grace Jones
ANApolo Nambo
Apolo Nambo
Jacek JasinskiJacek Jasinski
Jacek Jasinski
MCMaria L. Carreon
Maria L. Carreon
In this study, we investigate the influence of cold-plasma-induced enhanced performance and efficiency of SAPO-34 membranes in the separation of CO2 and CH4 mixtures. Placing the herein presented research in a broader context, we aim to address the question of whether cold plasma can significantly impact the membrane performance. We subjected SAPO-34 membranes to plasma mild disturbances and analyzed their performance in separating CO2 and CH4. Our findings reveal a notable enhancement in membrane efficiency and sustained performance when exposed to cold plasma. The pulsed plasma separation displayed improved structural integrity, and the experimental results indicated that the linear structure of CO₂ facilitates the distortion of electron clouds in response to the electric field, a property known as polarizability, which aids in effective separation. Plausible mechanistic insight indicated that the intermolecular forces facilitated an integral role in SAPO-34 membranes exhibiting strong electrostatic interactions. In conclusion, our research highlights the potential of cold plasma as a promising technique for improving the performance of SAPO-34 membranes in gas mixtures at atmospheric pressures, providing valuable insights for optimizing membrane technology in carbon capture and gas separation applications.

16 February 2026 in Materials
Verified
Journal Article
Open access
PDF file
VMVictor Jesús Sagrero Mora
Victor Jesús Sagrero Mora
FGFnu Gorky
Fnu Gorky
VSVashanti J Storr
Vashanti J Storr
FOFernando Maia de Oliveira
Fernando Maia de Oliveira
HCHECTOR CARREON
HECTOR CARREON
MCMaria L. Carreon
Maria L. Carreon
In this work, the deposition of graphene coatings on substrates of an ELI grade Ti-6Al-4V alloy was carried out using the Plasma Enhanced Chemical Vapor Deposition (PECVD) technique. The purpose of this study was to improve the surface properties of the material. The characterization of the material was carried out by non-destructive techniques, such as Raman Spectroscopy and Thermoelectric Potential. A preliminary characterization of Ti substrates was carried out by Raman spectroscopy. Conversely, thermoelectric potential tests were conducted using three distinct tip systems and four different temperature gradients. Lastly, some surface roughness measurements were conducted on all samples, both coated and uncoated. Graphene micro-structured coatings were obtained using a plasma-activated mixture of hydrogen and methane gases with an equimolar feed ratio (1:1 H2:CH4) at a temperature of 850 °C and a plasma exposure of 150 Watts and duration of 15 min. Raman spectra verified the presence of uniform micrometric graphene on the surface of Ti substrates. Graphene-coated Ti-6Al-4V ELI substrates exhibited Seebeck coefficient values indicating metallic-like behavior and suitability for thermoelectric sensing. In the eddy current analyses, it was found that low frequencies provided the highest sensitivity for differentiating between samples. An inverse relationship was identified between substrate thickness and phase angle, and a direct relationship with calculated electrical conductivity was also identified. This direct relation is attributed to penetration depth and interactions due to the chemical nature of the substrate and coating. Despite a slight increase in surface roughness after graphene deposition, values remained comparable to the base alloy, preserving compatibility for biomedical integration. Thermoelectric potential measurements revealed enhanced sensitivity to surface morphology and interfacial effects when high-sensitivity probe configurations were employed. These results support potential applications in implantable or wearable temperature sensors, energy harvesting devices, and smart biomedical interfaces. The thickness of the graphene coating was also characterized by SEM, which showed that the films deposited by PECVD are about 1 micron thick.

28 January 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
VMVictor Jesús Sagrero Mora
Victor Jesús Sagrero Mora
FGFnu Gorky
Fnu Gorky
VSVashanti J Storr
Vashanti J Storr
FOFernando Maia de Oliveira
Fernando Maia de Oliveira
HCHECTOR CARREON
HECTOR CARREON
MCMaria L. Carreon
Maria L. Carreon
In this work the deposition of graphene coatings on substrates of an ELI grade Ti-6Al-4V alloy was carried out using the Plasma Enhanced Chemical Vapor Deposition (PECVD) technique. The purpose of this study was to improve the surface properties of the material. The characterization of the material was carried out by non-destructive techniques, such as Raman Spectroscopy and Thermoelectric Potential. A preliminary characterization of Ti substrates was carried out by Raman spectroscopy. Conversely, thermoelectric potential tests were conducted using three distinct tip systems and four different temperature gradients. Lastly, some surface roughness measurements were conducted on all samples, both coated and uncoated. Graphene micro-structured coatings were obtained using a plasma activated mixture of hydrogen and methane gases with equimolar feed ratio (1:1 H₂:CH₄) at a temperature of 850°C and a plasma exposure of 150 Watts and duration of 15 minutes. Raman spectra verified the presence of uniform micrometric graphene on the surface of Ti substrates. Graphene-coated Ti-6Al-4V ELI substrates exhibited absolute thermoelectric potentials between 1.9 and 3.4 μV/K, indicating metallic-like behavior and suitability for thermoelectric sensing. In the eddy current analyses, it was found that the 50 kHz frequency provided the highest sensitivity for differentiating between samples. An inverse relationship was identified between substrate thickness and phase angle, and a direct relationship with calculated electrical conductivity. This direct relation is attributed to penetration depth and interactions due to the chemical nature of the substrate and coating. Despite a slight increase in surface roughness after graphene deposition, values remained comparable to the base alloy, preserving compatibility for biomedical integration. The Au-Cu testing system demonstrated enhanced sensitivity to Seebeck coefficient variations, suggesting its promise for high-resolution thermal sensing. These results support potential applications in implantable or wearable temperature sensors, energy harvesting devices, and smart biomedical interfaces. The thickness of the graphene coating was also characterized by SEM, which showed that the films deposited by PECVD are about 1 micron thick.