The power transmission lines are the link between power plants and the points of consumption, through substations. Most importantly, the assessment of damaged aerial power lines and rusted conductors is of extreme importance for public safety; hence, power lines and associated components must be periodically inspected to ensure a continuous supply and to identify any fault and defect. To achieve these objectives, recently, Unmanned Aerial Vehicles (UAVs) have been widely used; in fact, they provide a safe way to bring sensors close to the power transmission lines and their associated components without halting the equipment during the inspection, and reducing operational cost and risk. In this work, a drone, equipped with multi-modal sensors, captures images in the visible and infrared domain and transmits them to the ground station. We used state-of-the-art computer vision methods to highlight expected faults (i.e., hot spots) or damaged components of the electrical infrastructure (i.e., damaged insulators). Infrared imaging, which is invariant to large scale and illumination changes in the real operating environment, supported the identification of faults in power transmission lines; while a neural network is adapted and trained to detect and classify insulators from an optical video stream. We demonstrate our approach on data captured by a drone in Parma, Italy.

The historical buildings of a nation are the tangible signs of its history and culture. Their preservation deserves considerable attention, being of primary importance from a historical, cultural, and economic point of view. Having a scalable and reliable monitoring system plays an important role in the Structural Health Monitoring (SHM): therefore, this paper proposes an Internet of Things (IoT) architecture for a remote monitoring system that is able to integrate, through the Virtual Reality (VR) paradigm, the environmental and mechanical data acquired by a wireless sensor network set on three ancient buildings with the images and context information acquired by an Unmanned Aerial Vehicle (UAV). Moreover, the information provided by the UAV allows to promptly inspect the critical structural damage, such as the patterns of cracks in the structural components of the building being monitored. Our approach opens new scenarios to support SHM activities, because an operator can interact with real-time data retrieved from a Wireless Sensor Network (WSN) by means of the VR environment.

ARchaeological RObot systems for the World's Seas (ARROWS) EU Project proposes to adapt and develop low-cost Autonomous Underwater Vehicle (AUV) technologies to significantly reduce the cost of archaeological operations, covering the full extent of archaeological campaign. ARROWS methodology is to identify the archaeologists requirements in all phases of the campaign and to propose related technological solutions. Starting from the necessities identified by archaeological project partners in collaboration with the Archaeology Advisory Group, a board composed of European archaeologists from outside ARROWS, the aim is the development of a heterogeneous team of cooperating AUVs capable of comply with a complete archaeological autonomous mission. Three new different AUVs have been designed in the framework of the project according to the archaeologists' indications: MARTA, characterized by a strong hardware modularity for ease of payload and propulsion systems configuration change; U-C AT, a turtle inspired bio-mimetic robot devoted to shipwreck penetration and A-Size AUV, a vehicle of small dimensions and weight easily deployable even by a single person. These three vehicles will cooperate within the project with AUVs already owned by ARROWS partners exploiting a distributed high-level control software based on the World Model Service (WMS), a storage system for the environment knowledge, updated in real-time through online payload data process, in the form of an ontology. The project includes also the development of a cleaning tool for well-known artifacts maintenance operations. The paper presents the current stage of the project that will lead to overall system final demonstrations, during Summer 2015, in two different scenarios, Sicily (Italy) and Baltic Sea (Estonia)

This paper describes how Unmanned Aerial Vehicles (UAVs) may support the long-term monitoring of crack patterns in the context of architectural heritage preservation. In detail, this work includes: (i) a state of the art about the most used techniques in ancient structural monitoring; (ii) the description of the implemented methods, taking into account the requirements and constraints of the case study; (iii) the results of the experimentation carried out in the lab; and (iv) conclusions and future works.

In the recent years personal health monitoring systems have been gaining popularity, both as a result of the pull from the general population, keen to improve well-being and early detection of possibly serious health conditions and the push from the industry eager to translate the current significant progress in computer vision and machine learning into commercial products. One of such systems is the Wize Mirror, built as a result of the FP7 funded SEMEOTICONS (SEMEiotic Oriented Technology for Individuals CardiOmetabolic risk self-assessmeNt and Self-monitoring) project. The project aims to translate the semeiotic code of the human face into computational descriptors and measures, automatically extracted from videos, multispectral images, and 3D scans of the face. The multisensory platform, being developed as the result of that project, in the form of a smart mirror, looks for signs related to cardio-metabolic risks. The goal is to enable users to self-monitor their well-being status over time and improve their life-style via tailored user guidance. This paper is focused on the description of the part of that system, utilising computer vision and machine learning techniques to perform 3D morphological analysis of the face and recognition of psycho-somatic status both linked with cardio-metabolic risks. The paper describes the concepts, methods and the developed implementations as well as reports on the results obtained on both real and synthetic datasets