The valorization of agro-industrial by-products/co-products represents a sustainable pathway to produce high-value biomaterials. Feather meal is an agro-industrial co-product derived from clean and undecomposed poultry feathers processed under high heat and pressure that offers an economically viable and scalable alternative for keratin extraction compared to native feathers. This study explores the recovery of keratin from feather meal through an optimized alkaline hydrolysis process, achieving a yield of 20 wt.% at 15°C and 90 min of extraction by using 2 mol L-1 sodium hydroxide solution. A negative temperature dependence was observed in keratin extraction yield, suggesting the occurrence of thermal degradation at elevated temperatures. Protein analyses by different techniques confirmed the characteristic diffraction peaks, functional groups, and elemental composition (carbon, nitrogen, oxygen, and sulphur) of feather keratin. The extracted keratin presented a low molar mass of 9 kg mol-1. Considering the circular economy principles, this work proposes a novel valorization route for feather meal and highlights its potential in creating value-added materials for several applications in medicine, pharmaceuticals, and engineering areas.
18 July 2025 in International Journal of Hydrogen Energy
Among the countless routes for renewable hydrogen (H2) production, Biogas Dry Reforming (DR) has been highlighted as one of the most promising for the circular bio-economy sector. However, DR requires high operating temperatures (700 °C–900 °C), and, for greater efficiency, a thermally stable catalyst is necessary, being, above all, resistant to coke formation, sintering, and sulfur poisoning. Mesoporous metallic catalysts, such as nickel (Ni) supported on silica, stand out due to their high catalytic activity concerning such characteristics. In this regard, the presented work evaluated the influences of the nickel addition stage during the synthesis of mesoporous catalyst type Si-MCM-41. Two different catalysts were prepared: catalyst A (Ni/Si-MCM-41_A), synthesized through the in situ addition of the precursor salt of nickel (Ni(Ni(NO3)2·6H2O) before the addition of TEOS (Tetraethyl orthosilicate) and after the addition of the directing agent; and catalyst B (Ni/Si-MCM-41_B), resulting from the addition of the precursor salt after the TEOS, following the conventional methodology, by wet impregnation in situ. The results evidenced that the metal addition stage has a direct influence on the mesoporous structure. However, no significant influence was observed on the efficiency concerning BDR, and the conversions into H2 were 97% and 96% for the Ni/SiMCM-41_A and Ni/Si-MCM-41_B catalysts, respectively.
1 January 2026 in Engenharia Sanitaria e Ambiental
This study presents a technical and experimental evaluation of a pilot-scale unit for low-carbon hydrogen production via dry reforming of methane (DRM) using biogas derived from Upflow Anaerobic Sludge Blanket (UASB) reactors at a municipal wastewater treatment plant (WWTP). Computational modeling was conducted using Aspen Plus® V. 14 to define energetic profile and mass balance of the system and to validate the simulation parameters. Experimental DRM tests were conducted by varying the feed flow rate and biogas molar ratios. Simulation results indicated a biogas demand of 120 m³.day-1 to yield a purified hydrogen output of 14.23 kg.day-1 via Pressure Swing Adsorption (PSA). The unit required thermal loads of 12.90 kW for heating and 4.09 kW for cooling. Experimental validation using a Ni/MCM-41 catalyst confirmed that a stoichiometric CH4/CO2 ratio of 1.0 at a feed flow rate of 6 mL.s-1 optimized conversion efficiency, achieving 94% conversion for CH4 and 98% for CO2.