Variation of the working gas pressure (from 8 to 2 Pa) during RF magnetron sputtering deposition of thin perovskite lead zirconate titanate (PZT) films revealed strong changes in their lead...
17 July 2018 in IOP Conference Series: Materials Science and Engineering
The element composition modification is experimentally studied in PZT thin films obtained via the RF magnetron sputtering with variable working gas pressure. The experimental data were...
The development and analysis of the properties of a new material based on UV-curable acrylate monomers with silicon-containing hydroxyapatite and zinc oxide nanoparticles as an antibacterial component and gelatin was carried out. Using this material in orthopedics and dentistry is very convenient because it covers any surface geometry of metal implants and hardens under ultraviolet light. In this work, sorption properties, changes in porosity, and mechanical properties of the material were investigated. The conditions for obtaining hydroxyapatite (HA) nanoparticles and the presence of silicon oxide nanoparticles and organic for the shell in an aqueous medium were studied for the pH of the medium, the sequence of administration and concentration of the material components, as well as antibacterial properties. This polymer material is partially resorbable. That supports not only the growth of bone cells but also serves as a protective layer. It reduces friction between organic tissues and a metal implant and can be a solution to the problem of the aseptic instability of metal implants. The material can also be used to repair damaged bones and cartilage tissues, especially in cases where the application and curing procedure is performed using laparoscopic methods. In this work, the authors propose a simple and quite cheap method for obtaining material based on photopolymerizable acrylates and natural gelatin with nanoparticles of HA, zinc oxide, and silicon oxide. The method allows one to obtain a composite material with different nanoparticles in a polymer matrix which retain the requisite properties needed such as active-sized HA, antibacterial ZnO, and structure-forming and stability-improving SiO2 nanoparticles.
The article discusses the possibilities of fine composition variation of polycrystalline PZT films at the morphotropic phase boundary. The composition of thin films prepared by RF magnetron sputtering of a ceramic target of stoichiometric composition PbZr0.54Ti0.46O3 was varied by changing the distance from the target to the substrate in the range of 30–70 mm. This made it possible to change the composition by ~1.5%. The study focused on the dielectric properties of the formed self-polarized films. The study found that the resistance to external electric fields depends on the conditions of film preparation.