As is well known, vibration, especially ultra-low-frequency vibration, is harmful to machinery’s accuracy and service life and even human health. This paper experimentally validates vibration isolation technology for low-frequency applications based on quasi-zero stiffness (QZS) properties. Firstly, a platform for isolating low-frequency vibration, referred to as LFVIP, is introduced, featuring a quasi-zero stiffness characteristic. Then, the dynamic stiffness of this platform is analyzed and established. Based on this analytical model, a solution for designing the platform to obtain the desired stiffness in the equilibrium state is suggested. Secondly, an experimental setup is established to verify the isolation performance of the platform under base displacement excitation. In addition, the isolation effectiveness of the LFVIP is compared with that of its linear counterpart (LC). The experimental results indicate that the LFVIP provides the starting isolation for effective isolation at approximately 2 Hz, while that of LC is around 6 Hz. Moreover, the vibration attenuation of the LFVIP is greater than that of the LC. Vibration isolation technology based on quasi-zero stiffness is superior to the LC, particularly in the low-frequency region. This work offers useful insights for the design of vibration isolators, suspension systems, and related applications, particularly by demonstrating how the superior vibration attenuation of the LFVIP can be leveraged to improve the performance of these systems.
The main objective of this paper is to propose the innovative mathematical model for identifying the hysteresis dynamic behavior of a 2-DoF force feedback mechanism based on magnetorheological (MR) fluid. Indeed, the configuration of this mechanism includes two MR brakes, which are mounted orthogonally together thanks to the Cardan coupling. Each MR brake provides an independent resistance torque transmitted to the control handle. Due to exhibiting both strong hysteresis characteristics and nonlinear dynamic behavior, the construction of the identification model is designed by combining the Preisach model with the deep learning (DL) model in series, where the former is used to estimate the hysteresis effects meanwhile the influences of nonlinear dynamics are captured by the latter. Inspired by data-driven modelling, the Preisach weighting function is estimated by using the least squares method, whereas the DL is trained by the metaheuristic optimization method. Then, the effectiveness of the proposed model is evaluated and compared with that of a pure data-driven DL model. The experimental results demonstrate the capability of the proposed model to identify the complex dynamic behavior of the 2-DoF force feedback mechanism.
Khảo sát thực nghiệm quá trình hình thành và xuất hiện khuyết tật hàn ma sát khuấy được thực hiện trên máy phay đứng của hãng MANFORD. Tốc độ của dụng cụ khuấy được quay với 1.875 vòng/phút và vận tốc chạy dọc theo đường hàn là 20 mm/phút là hai thông số quan trọng đối với thiết bị được để khảo sát. Vật liệu để khảo sát khuyết tật trong hàn ma sát là nhôm và đồng đỏ. Trong nghiên cứu khảo sát này, cái nhìn toàn diện về các yếu tố chính liên quan đến quá trình xuất hiện sự hình thành khuyết tật trong các phương pháp hàn khuấy thường được sử dụng với hợp kim nhôm và đồng bằng phương pháp thực nghiệm được làm rõ. Tốc độ quay của dụng cụ, độ sâu vật hàn, vận tốc di chuyển của dụng cụ, chi phối nhiệt độ cao được tạo ra trong quá trình hàn ma sát khuấy và thời gian cần thiết để hàn vật liệu là rất quan trọng. Mô hình nghiên cứu này đã dự đoán và phân tích thêm các khuyết tật của đường hàn trên bề mặt, đường hàn dưới bề mặt, sự hình thành không khuyếch tán khuấy và lỗ thoát của chốt. Và đồng thời so sánh độ bền của mối hàn ma sát bị khuyết tật vượt trội hơn so với mối hàn Laser. Các giá trị này được kiểm tra bởi độ bền kéo tối đa lần lượt là 21.5 MPa và 15.8 MPa tại vùng hàn của FSW và Laser.