Tribological testing of moving shaft/sealing pairs in complex environments is at the frontline of research. Machines working in abrasive conditions are subject to different wear effects. It is not only valid on Earth but especially valid for rovers and future robots used in Mars and Moon missions. The aim of our joint research with the European Space Agency is to study the abrasion phenomena of moving machine elements on Mars and the Moon by using artificial soil samples (“simulants”). This review details mainly the available simulant sources and recommend a selection of the most suitable ones for tribological testing. Moreover, the potential mating structural materials subjected to abrasive space applications are reviewed briefly. The tribological tests are exploring the features of the rotary shaft/seal relationship that is subject to dry friction and intense abrasion. By using the simulants, measurements are performed under laboratory conditions with both a sample test and a real shaft/seal connection. Parameters of the selection criteria were defined, and classification of the simulant sources were made. It was found that simulant particle size distribution and chemical substance content are detailed enough only for a limited type of available artificial Moon and Mars soil samples. Four simulants were identified and applied later in the tribological testing. For the shaft materials, based on a detailed case study of polymers, steel, and aluminum alloys, a high-strength aluminum alloy with a hard anodized surface and a stainless steel were selected for further abrasion tests.
For space missions to either the Moon or Mars, protecting mechanical moving parts from the abrasive effects of prevailing surface dust is crucial. This paper compares the abrasive effects of two lunar and two Martian simulant regoliths using special pin-on-disc tests on a stainless steel/polytetrafluoroethylene (PTFE) sealing material pair. Due to the regolith particles entering the contact zone, a three-body abrasion mechanism took place. We found that friction coefficients stabilised between 0.2 and 0.4 for all simulants. Wear curves, surface roughness measurements, and microscopic images all suggest a significantly lower abrasion effect of the Martian regoliths than that of the lunar ones. It applies not only to steel surfaces but also to the PTFE pins. The dominant abrasive micro-mechanism of the disc surface is micro-ploughing in the case of all tests, while the transformation of the counterface is mixed. The surface of pin material is plastically transformed through micro-ploughing, while the material is removed through micro-cutting due to the slide over hard soil particles.
The wear behaviour of two martensitic and one multiphase steel targeted for abrasion and erosion applications in agriculture and mining industry were investigated in three abrasive test systems with different complexity. Scratch tests were performed with different indenter radii, shapes, and loads. The material behaviour was also investigated in multi-asperity contact systems. Pin-on-disc tests were performed with various loads and abrasive particles, as well as abrasive slurry-pot tests with different sliding velocities, distances, and impact angles of the abrasive media were performed. Comparing the test systems, the tested materials ranked similarly based on their wear performance, however, in each configuration, the dominant variable of the wear mechanism differed. The significance and contributions of test paramecenterters, the material’s mechanical properties (H, , , E, ε, ε, W, , ) and the dimensionless numbers formed from them were investigated on the wear behaviour and the surface deformation. Correlation between parameters was established by multiple linear regression models. The sensitivity of the tested materials to abrasion was evaluated taking into account the wide range of influencing parameters.
Tribological testing of moving shaft/sealing pairs in complex environments is at the frontline of research. Machines working in abrasive conditions are subject to different wear effects. It is valid not only on the Earth but especially valid for rovers and future robots used in Mars and Moon missions. The aim of our joint research with the European Space Agency is to study the abrasion phenomena of moving machine elements on Mars and the Moon, by using artificial soil samples (“simulants”). This review detail the available simulant sources and recommend a selection of the most suitable ones for tribological testing. Moreover, the potential mating structural materials subjected to abrasive space applications are reviewed. The tribological tests are exploring the features of the rotary shaft/seal relationship that is subject to dry friction and intense abrasion. By using the simulants, measurements are performed under laboratory conditions with both a sample test and a real shaft/seal connection. Parameters of the selection criteria have been defined and classification of the simulant sources were made. It was found that simulant particle size distribution and chemical substance content is detailed enough only for a limited type of available artificial Moon and Mars soil samples. 4 simulants have been identified and applied later in the tribological testing. For the shaft materials, based on a detailed case study of polymers, steel and aluminium alloys, a high-strength aluminium alloy with a hard anodized surface and a stainless steel were selected for further abrasion tests.
We have investigated the sealing performance of different sealants and the abrasive effect of some Martian regolith simulants (MGS-1 and JEZ-1) by pin-on-disc tests using steel and various pin material pairs. Pin materials, representing sealants, were present in the following two forms: block types, such as pure polytetrafluoroethylene (PTFE) and composite PTFE, as well as braided pins, including pure and hybrid composite PTFE. Friction resistance, wear, surface roughness, and electron microscopy analyses were used to evaluate the tribological properties. We found significant differences between the block-type and braided pin materials regarding the sealing and wear performance. The braided pins either reached stabilized coefficients of friction at a much higher level (0.55) than the block-type pins or did not stabilize at all during the longest test duration. Martian regoliths resulted in negligible wear regarding the disc, but the hybrid composite braided pins were severely worn, causing the abrasion test to be stopped before schedule.
This study investigates the abrasive effects of Lunar Highland regolith simulant (TH100) and the particle size effect on stainless steel/PTFE rotary shaft–lip seal assemblies. A custom-built sand-pot testing rig filled with Nitrogen gas was used to expose EN-1.4404 stainless steel shafts paired with spring-loaded natural PTFE seals to fine (≤0.125 mm) and coarse (1.400–2.000 mm) Lunar Highland regolith particles. Each rotating pair was operated for 0.25, 0.5, and 24 hours at sequential shaft positions. Wear progression was assessed through shaft surface roughness measurements and scanning electron microscopy of the seals before and after testing. All tests under fine particles were completed without failure, whereas the sealing system exposed to coarse particles failed during the final shaft position and test was stopped. Fine particles primarily induced micro-cutting on the shaft surface, while coarse particles produced a combination of micro-cutting and micro-ploughing. These findings reveal the pronounced influence of particle size on wear mechanisms in lunar dust-exposed rotary sealing systems, with implications for the durability of moving components in extraterrestrial environments.