The harsh environments in saline–alkaline areas and high-altitude regions with intense ultraviolet radiation pose great challenges to the durability of asphalt pavements. The fatigue performance of asphalt binder significantly determines the actual service life of asphalt pavements. Existing studies have predominantly focused on the impact of individual environmental factors (e.g., aging and saline–alkaline erosion) on asphalt performance, yet there remains a notable research gap in the systematic analysis of asphalt’s fatigue and self-healing behavior under coupled multi-factor interactions, particularly regarding the synergistic effects of UV aging and saline–alkaline conditions. Therefore, it is of great importance to understand the influence rules of the coupling effect of aging and salt–alkaline characteristics on the properties of asphalt materials. In this study, 70# base asphalt and GO-modified asphalt were taken as the research objects. Frequency sweep tests, linear amplitude sweep (LAS) tests, and LAS-based healing tests were conducted using a dynamic shear rheometer. The fatigue and self-healing properties of the two asphalt materials under different aging conditions and aging and salt–alkali coupling effects were analyzed based on the viscoelastic continuum damage theory. The results showed that the degree of aging can increase the stress peak of asphalt materials under small strains and also increase their stress attenuation rate. Except for short-term aging and salt–alkali effects, the aging and salt–alkali coupling effects generally further reduce the stress peaks of asphalt materials. Aging can increase the fatigue life of asphalt and increase the fatigue life attenuation rate of asphalt. The aging and salt–alkali coupling effects will reduce the fatigue life of asphalt and increase the decline rate of the asphalt fatigue life. The self-healing efficiency of asphalt is affected by the degree of aging, and the aging and salt–alkali coupling effects further reduce the self-healing efficiency of asphalt materials. This paper elucidates the influence mechanisms of intense UV irradiation and saline–alkaline environments on GO-modified asphalt, providing theoretical and practical references for its future engineering applications in harsh environmental conditions.

As a green and low-carbon road material, warm-mix rubber asphalt (WMRA) has received extensive attention from scholars for its road performance. In the in-depth study of its properties, the fatigue characteristics of WMRA are particularly critical. However, in current studies on asphalt fatigue performance, its self-healing ability is often underestimated or neglected. Furthermore, the simplified viscoelastic continuum damage theory (S-VECD), with its accuracy, speed, and convenience, provides a powerful tool for analyzing asphalt fatigue performance. Therefore, to analyze the fatigue and self-healing performances of WMRA in practical applications, four sample materials were selected in this study: virgin asphalt mastic (VAM), rubber asphalt mastic (RAM), Sasobit rubber asphalt mastic (SRAM), and Evotherm rubber asphalt mastic (ERAM). Subsequently, the samples were subjected to a comprehensive experimental design with frequency sweep tests, linear amplitude sweep tests, and multiple intermittent loading time sweep tests under different aging conditions. The fatigue and self-healing performances of different aging degrees and different types of WMRA were evaluated based on the S-VECD theory. The results show that aging reduces the fatigue and self-healing performances of asphalt mastic to a certain extent, and at a 7% strain, the fatigue life of SRAM after long-term aging is only 30.7% of the life of the unaged sample. The greater the aging degree, the more pronounced the effect. Under different aging levels, the warm-mix agent can significantly improve the fatigue and self-healing performances of rubber asphalt mastic. After undergoing ten fatigue intermittent loading tests, the recovery rate of the complex shear modulus for the long-term aged VAM was 0.65, which is lower than that of SRAM under the same conditions, and the warm mix can further extend the fatigue life of rubber asphalt by improving the self-healing properties of the asphalt. The role of Sasobit in enhancing the fatigue and self-healing performances of rubber asphalt mastic is more significant. This study can provide a theoretical basis for the promotion and application of WMRA pavements and contribute to the sustainable development of road construction.

Moisture accelerates the degradation of asphalt properties, significantly impacting the service life of roads. Therefore, this study uses simplified viscoelastic continuous damage theory and employs frequency scanning, linear amplitude scanning, and fatigue–healing–fatigue tests with a dynamic shear rheometer. The objective is to investigate the effects of aging time, moisture conditions, and aging temperature on the fatigue and self-healing performance of SBS (Styrene–Butadiene–Styrene block copolymer)-modified asphalt, nano-SiO₂-modified asphalt, and nano-SiO₂/SBS composite modified asphalt in a moisture-rich environment. The results indicate that nano-SiO₂ powder enhances the low-temperature performance of modified asphalt, whereas the SBS modifier reduces temperature sensitivity and increases the recovery percentage after deformation. Compared to SBS-modified asphalt, the deformation resistance of nano-SiO₂/SBS composite modified asphalt has increased by about 30%, while nano-SiO₂-modified asphalt shows relatively poor deformation resistance. The fatigue performance of SBS-modified asphalt deteriorates under moisture, whereas the addition of nano-SiO₂ powder improves its fatigue life. Nano-SiO₂/SBS composite modified asphalt exhibits strong self-healing capabilities. Although self-healing can enhance the fatigue life of modified asphalt, moisture inhibits this improvement after self-healing.

The indirect tensile test plays a crucial role in experimental investigations of brittle material properties. In this study, a mechanical analysis model of the rectangular test block is established based on the theory of elastic mechanics for the characteristics of the indirect tensile test. The theoretical solution of the triangular series is derived for the rectangular test block under the locally distributed load. The finite element simulation results and splitting test results were compared with the theoretical results. The results of the study verify the accuracy of the theoretical solutions. Based on the proposed analytical solution, the effects of loading width and length-to-height ratio (h/l) of local loading on the measured tensile strength of test block are discussed. The results demonstrate that the tensile strength of the test block increases as the loading width expands, and the rate of growth in the recorded tensile strength gradually stabilizes. The variation in loading width affects the location of crack initiation points during the concrete test block splitting tests. When the loading width exceeds 6% of the side length of test block, the cracking point is positioned at the center of test block, ensuring the effectiveness of the splitting test. As the length-to-height ratio of the test block increases, there is a general upward trend in the measured tensile strength. When h/l < 0.6, the measured tensile strength initially increases before decreasing. However, when h/l > 0.6, the measured tensile strength consistently increases, with the rate of increase gradually diminishing until it stabilizes. The length-to-height ratio also significantly influences the location of the cracking point in the test block. As the length-to-height ratio increases, the cracking point initially shifts from around the center to the central point and then further from the center toward the edge. To ensure that the location of the crack initiation point is in the center of the specimen and that the tensile strength is close to the measured result, the length to height ratio can be chosen at around 0.85.