This study collected basic information and conducted waste composition surveys to identify the present management condition of construction and demolition waste (CDW) landfills in Hanoi of Vietnam and to characterize waste composition and grain size distribution of CDW dumped at landfills. Basic information on seven CDW landfills under operation or closed/abandoned was collected, and the waste composition and the grain size distributions of dumped CDW at two landfills were investigated. Results showed that only one landfill site is currently under operation in Hanoi. Sanitary conditions of investigated landfills were relatively good without dumping of hazardous waste. Illegal dumping of domestic waste from residents, however, could be observed more or less at all sites due to an unclear boundary between dumping and surrounding areas. To improve current management of CDW landfills, a suitable recording system of accepted/dumped CDW and technical support for site managers are required as well as the implementation plan for developing and renovating landfills. Based on the results of the waste composition survey, the major components of dumped CDW were “Concrete”, “Clay bricks”, and “Soil-like”, and the sum of these materials reached >80% of the total. Grain size distributions of “Concrete” ranged from 10–600 mm and of “Clay bricks” ranged from 10–300 mm. Technical recommendations to examine a potential availability of dumped “Concrete” and “Clay bricks” as a base material in road construction are summarized from the viewpoints of segregation from “Soil-like” and impurities, grading of “Concrete” and “Clay bricks”, mechanical properties and environmental safety, and economic feasibility. The findings in this study raise challenges and perspectives to establish sound CDW management and to promote sustainable development of CDW recycling in Vietnam.

Heavy metals in road dusts can directly pose significant health risks through ingestion, inhalation, and dermal contact. This study investigated the pollution, distribution, and health effect of heavy metals in street dust from industrial, capital city, and peri-urban areas of Bangladesh. Inductively coupled plasma mass spectrometry (ICP-MS) examined eight hazardous heavy metals such as Zn, Cu, Pb, Ni, Mn, Cr, Cd, and Co. Results revealed that industrial areas showed the highest metal concentrations, following the order Mn > Zn > Cr > Pb > Ni > Co > Cd, with an average level of 444.35, 299.25, 238.31, 54.22, 52.78, 45.66, and 2.73 mg/kg, respectively, for fine particles (≤20 μm). Conversely, multivariate statistical analyses were conducted to assess pollution levels and sources. Anthropogenic activities like traffic emissions, construction, and industrial processing were the main pollution sources. A pollution load index revealed that industrial areas had significantly higher pollution (PLI of 2.45), while the capital city and peri-urban areas experienced moderate pollution (PLI of 1.54 and 1.59). Hazard index values were below the safety level of 1, but health risk evaluations revealed increased non-carcinogenic risks for children, especially from Cr, Ni, Cd, and Pb where Cr poses the highest cancer risk via inhalation, with values reaching 1.13 × 10⁻⁴–5.96 × 10⁻⁴ falling within the threshold level (10⁻⁴ to 10⁻⁶). These results underline the need for continuous environmental monitoring and pollution control in order to lower health hazards.

Spatial variations in the bioaccessibility and health risks induced by chromium (Cr), manganese (Mn), cobalt (Co), nickel (Ni), copper (Cu), zinc (Zn), arsenic (As) and lead (Pb) in roadside dust from different land-use areas, i.e., commercial areas (CA), planned residential areas (PRA), spontaneous residential areas (SRA) and urban green areas (UGA) in Dhaka city, Bangladesh, were investigated. An in vitro simple bioaccessibility extraction test (SBET) method, which allows the simulation of the gastric (GP) and intestinal phases (IP) of human digestion, was applied to evaluate bioaccessibility and human health risk, assessed using United States Environmental Protection Agency (U.S. EPA) modelling. The average bioaccessible concentration of Zn was the highest in both the gastric (74.4–244.5 µg/g) and intestinal phases (74.4–244.5 µg/g) in all the land-use areas except UGA. The bioaccessibility percentages of Co and Cu in the IP phase and As in the GP phase were >40% for all the land-use categories. Carcinogenic (Cr, Ni, As and Pb) and non-carcinogenic human health risks were evaluated for the ingestion pathway, in both children and adults. The results suggest that there were no non-carcinogenic risks for adults and children exposed to roadside dust toxic metals, but the risk levels of roadside dust toxic metals in some sampling areas were high. The carcinogenic risks of Cr in SRA (for children) and Ni in CA (for both adults and children), PRA (for children) and UGA (for children) were found to be within a tolerable range of 10⁻⁶ to 10⁻⁴.

As a developing country in the context of globalization, Vietnam is experiencing a boom in its economy, characterized by a rapid rate of urbanization nationwide. Together with its benefits, this process also puts pressure on the environment, among which the increasing generation of construction and demolition waste (CDW) is an urgent issue. In this study, the authors conducted an in-depth investigation of various aspects in the generation and management of CDW in Vietnam. Firstly, part of the overall picture of CDW management in Vietnam was revealed in detail from the perspective of demolition contractors, one of the important stakeholders in the field. Their insights provide valuable information on current situation, practice, and attitude towards CDW recycling. Secondly, this paper reports the generation rate of different categories of materials from demolition sites of building structures in Hanoi, Vietnam, with the main focus on crushed concrete and crushed brick (CC–CB) and steel as they make up the majority of the generated waste. In order to achieve two mentioned goals, close contact was constantly kept with a key collaborator – a renowned demolition contractor in Hanoi throughout the investigation. The collaborator provided proper introduction to enable interviews with various other contractors, together with information of buildings being dismantled.

Heavy metal contamination in agricultural soils poses serious threats to food safety, ecosystem integrity, and public health. This study investigates the concentrations, ecological risks, and human health impacts of nine heavy metals Cr, Mn, Co, Ni, Cu, Zn, Pb, As, and V in homestead agricultural soils collected from two depths, surface (0–20 cm) and subsurface (21–50 cm), across industrial and non-industrial regions of Bangladesh, using inductively coupled plasma mass spectrometry (ICP-MS). Results revealed that surface soils from industrial areas exhibited the highest metal concentrations in order of Mn > Zn > Cr > Pb > V > Ni > Cu > As > Co. However, maximum As levels were detected in non-industrial areas, suggesting combined influences of local geology, intensive pesticide application, and prolonged irrigation with As-contaminated groundwater. Elevated concentrations in surface soils indicate recent contamination with limited downward migration. Multivariate statistical analyses indicated that industrial and urban activities are the major sources of contamination, whereas Mn remains primarily geogenic, controlled by natural soil forming processes. Contamination factor (CF) and pollution load index (PLI) analyses identified Pb and As as the principal pollutants, with hotspots in Nairadi, Majhipara (Savar), Gazipur sadar, and Chorkhai (Mymensingh). Ecological risk (ER) assessment highlighted As and Pb as the dominant environmental stressors, though overall risk remained low. Human health risk analysis showed that ingestion is the primary exposure pathway, with children being more susceptible than adults. Although the hazard index (HI) values were within the acceptable safety limits, the estimated carcinogenic risks for As and Cr exceeded the USEPA thresholds, indicating potential long term health concerns. Therefore, the cumulative carcinogenic risk (CCR) results demonstrate that As is the primary driver of lifetime carcinogenic risk in homestead soils, followed by Cr, while contributions from other metals are minimal. These findings emphasize the urgent need for continuous monitoring, improved industrial waste management, and targeted mitigation strategies to ensure safe food production, a cleaner environment, and better public health.

This study aims to obtain findings on the internal water behavior, the presence of water channels, and the degree of washout due to rainfall infiltration in Japanese municipal solid waste (MSW) final disposal sites. Electrical resistivity tomography (ERT) monitoring and undistributed waste sampling for X-ray computed tomography (X-ray CT) analysis were conducted in the field. The study sites were targeted at Site A, which is mainly composed of non-combustible residues, and Site B, which is mainly composed of incineration ash. The time-dependent resistivity distributions obtained from real-time ERT monitoring were effective for us to understand the water content distribution after water infiltration during water injection tests. As a result, the global flow behavior and the local water channel flow were determined. In addition, X-ray CT analysis of the undisturbed waste samples obtained from the sites clarified the different pore structures, indicating the possibility of more advanced washing out at Site A than at Site B. Furthermore, the soil cover layer and gas extraction wells had a significant effect on the resistivity structure with respect to water flow behavior. Since soil cover layer and gas extraction wells are significant factors affecting waste stabilization by washout, it is suggested that these factors should be considered in the design and maintenance of landfills.