TiO₂nanoparticles were synthesized at room temperature by chemical precipitation method and were then heated at 120, 300, 600 and 900 °C temperatures. The phase transition and crystallite size variation were determined by X-rays diffraction (XRD) analysis. The surface area, pore volume and pore size were measured using Brunauer–Emmet–Teller (BET) and Barrett–Joyner–Halenda (BJH) methods. The optical activity of heat treated and non-heat treated samples were carried out by diffuse reflectance (DR) spectroscopy. Four different methods were used to calculate band gap energy. The results obtained from thermogravimetric and differential thermal gravimetric (TG/TDG) analyses and Fourier transform infra-red (FTIR) spectroscopy agreed with each other. Agar well diffusion method has been applied to explore the antibacterial activity of nanoparticles against different bacterial strains such asBacillus subtilis,Staphylococcus Aureus, Escherichia coliandPseudomonas Aeruginosa. It was observed that TiO₂nanoparticles heated at 120 °C displayed maximum antibacterial activity while those heated at higher temperature showed no activity against the examined bacteria.

Coating is one of the most effective measures to protect metallic materials from corrosion. Various types of coatings such as metallic, ceramic and polymer coatings have been investigated in a quest to find durable coatings to resist electrochemical decay of metals in industrial applications. Many polymeric composite coatings have proved to be resistant against aggressive environments. Two major applications of ferrous materials are in marine environments and in the oil and gas industry. Knowing the corroding behavior of ferrous-based materials during exposure to these aggressive applications, an effort has been made to protect the material by using polymeric and ceramic-based coatings reinforced with nano materials. Uncoated and coated cast iron pipeline material was investigated during corrosion resistance by employing EIS (electrochemical impedance spectroscopy) and electrochemical DC corrosion testing using the “three electrode system”. Cast iron pipeline samples were coated with Polyvinyl Alcohol/Polyaniline/FLG (Few Layers Graphene) and TiO₂/GO (graphene oxide) nanocomposite by dip-coating. The EIS data indicated better capacitance and higher impedance values for coated samples compared with the bare metal, depicting enhanced corrosion resistance against seawater and “produce water” of a crude oil sample from a local oil rig; Tafel scans confirmed a significant decrease in corrosion rate of coated samples.

Corrosion occurs as a result of the interaction of a metal with its environment. The extent of corrosion depends on the type of metal, the existing conditions in the environment and the type of aggressive ions present in the medium. For example,^CO₃⁻²and^NO−3produce an insoluble deposit on the surface of iron, resulting in the isolation of metal and consequent decrease of corrosion. On the other hand, halide ions are adsorbed selectively on the metal surface and prevent formation of the oxide phase on the metal surface, resulting in continuous corrosion. Iron, aluminum and their alloys are widely used, both domestically and industrially. Linear alkylbenzene and linear alkylbenzene sulfonate are commonly used as detergents. They have also been found together in waste water. It is claimed that these chemicals act as inhibitors for stainless steel and aluminum. Release of toxic gases as a result of corrosion in pipelines may lead in certain cases to air pollution and possible health hazards. Therefore, there are two ways to look at the relationship between corrosion and pollution: (i) corrosion of metals and alloys due to environmental pollution and (ii) environmental pollution as a result of corrosion protection. This paper encompasses the two scenarios and possible remedies for various cases, using ‘green’ inhibitors obtained either from plant extracts or from pharmaceutical compounds. In the present study, the effect of piperacillin sodium as a corrosion inhibitor for mild steel was investigated using a weight-loss method as well as a three-electrode dc electrochemical technique. It was found that the corrosion rate decreased as the concentration of the inhibitor increased up to 9×10^{−4 M}; 93% efficiency was exhibited at this concentration.

Multiwalled carbon nanotubes (MWCNTs) were modified to covalently attach the carboxylic moiety with their surfaces. Variant concentrations of functionalized multiwalled carbon nanotubes (F-MWCNTs) were introduced into polydimethylsiloxane (PDMS) adopting solution mixing technique. Fourier transform infrared spectroscopy (FTIR) confirms the carboxy functionalization presence on the surface of the nanotubes. X-ray diffraction (XRD) patterns for both MWCNTs and F-MWCNTs illustrate that the crystallinity does not alter with surface modification of the nanotubes. Experimental results simulated that electrical conductivity of the nanocomposites was augmented with increasing filler concentration in the host matrix. Thermal conductivity and thermal impedance of the nanocomposite specimens were evaluated according to developed methodologies and the accumulative data revealed the nanocomposites thermal transport dependence on the F-MWCNTs doping concentration in the host polymer matrix. Thermal stability enhancement with increasing filler incorporation into the polymer matrix was observed in thermogravimetric/differential thermal analyzer (TG/DTA) contours. Crystallization, glass transition, and melting temperatures were examined using differential scanning calorimeter (DSC) and it was observed that phase transition temperatures of the composite specimens can be tuned by varying the nanotubes to matrix ratio. Scanning electron microscopy and energy dispersive x-ray spectroscopy were carried out to analyze the surface morphology/composition of the fabricated nanocomposites and dispersion of functionalized and pristine MWCNTs in the polymer matrix.