The interest in producing biodegradable polymers by chemical treatment, microorganisms and enzymes has increased to make it easier to dispose after the end of its use without harming the environment. Biodegradable polymers reported a set of issues on their way to becoming effective materials. In this article, biodegradable polymers, treatment, composites, blending and modeling are studied. Environmental fate and assessment of biodegradable polymers are discussed in detail. The forensic engineering of biodegradable polymers and understanding of the relationships between their structure, properties, and behavior before, during, and after practical applications are investigated.

Bioenergy has emerged to be among the primary choices for the short- and medium-term replacement of fossil fuels and the reduction in greenhouse gas (GHG) emissions. The most practical method for transforming biomass into biofuel is thermochemical conversion, which may be broken down into combustion, torrefaction, pyrolysis, hydrothermal liquefaction, and gasification. In this study, producing biofuels using a biomass pyrolysis process was investigated. This study explored the pyrolysis process and operating conditions to optimize the process parameters to maximize the desired product yields and quality. The pyrolysis process produces three main products, which are bio-oil, bio-char, and gas. There are three classifications for the pyrolysis method, with each of them producing a majority of a certain product. First, slow pyrolysis is conducted in the temperature range of 300–950 °C and residence time of 330–550 s. It produces around a 30% oil yield and 35% char yield, and thus, the majority yield of slow pyrolysis is char. Second, fast pyrolysis produces around 50% oil, 20% char, and 30% gas yields with a temperature range of 850–1250 °C and a residence time of 0.5–10 s. The average yield of flash pyrolysis was found to be 75% bio-oil, 12% bio-char, and 15% gas, which is conducted within less than 1 s. It was reported that the pyrolysis of biomass was simulated using ASPEN Plus, where the effects of several parameters, such as the temperature, heating rate, and residence time, on the product yield and composition were investigated. Pyrolysis was performed under different conditions ranging from 400 to 600 °C. The effects of different catalysts on the pyrolysis process were studied. It was found that the addition of a catalyst could increase the yield of bio-oil and improve the quality of the product. The optimal operating condition for the pyrolysis process was determined to be a temperature of 500 °C, which resulted in a higher bio-oil yield. It was found that the biofuel yield was enhanced by selecting appropriate raw materials, such as rice husk, along with the pyrolysis temperature (e.g., 450 °C) and particle size (350–800 µm), and using a low residence time and pressure.

Polymeric membranes have been widely employed for water purification applications. However, the trade-off issue between the selectivity and permeability has limited its use in various applications. Mixed matrix membranes (MMMs) were introduced to overcome this limitation and to enhance the properties and performance of polymeric membranes by incorporation of fillers such as silica and zeolites. Metal-organic frameworks (MOFs) are a new class of hybrid inorganic–organic materials that are introduced as novel fillers for incorporation in polymeric matrix to form composite membranes for different applications especially water desalination. A major advantage of MOFs over other inorganic fillers is the possibility of preparing different structures with different pore sizes and functionalities, which are designed especially for a targeted application. Different MMMs fabrication techniques have also been investigated to fabricate MMMs with pronounced properties for a specific application. Synthesis techniques include blending, layer-by-layer (LBL), gelatin-assisted seed growth and in situ growth that proved to give the most homogenous dispersion of MOFs within the organic matrix. It was found that the ideal filler loading of MOFs in different polymeric matrices is 10%, increasing the filler loading beyond this value led to formation of aggregates that significantly decreased the MOFs-MMMs performance. Despite the many merits of MOFs-MMMs, the main challenge facing the upscaling and wide commercial application of MOFs-MMMs is the difficult synthesis conditions of the MOFs itself and the stability and sustainability of MOFs-MMMs performance. Investigation of new MOFs and MOFs-MMMs synthesis techniques should be carried out for further industrial applications. Among these new synthesis methods, green MOFs synthesis has been highlighted as low cost, renewable, environmentally friendly and recyclable starting materials for MOFs-MMMs. This paper will focus on the investigation of the effect of different recently introduced MOFs on the performance of MOFs-MMMs in water purification applications.